• Transmission Type: Manual Transmission
• Joint Type: Flexible Joint Disc
• Outer Diameter [mm]: 100
• Internal Toothing differential side, conn. to conn. shaft: 33
• Lisainfo: CV joint, front, inner
• Additional information: CV joint, front, inner

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-007
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Manufacturer: NTY

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• for OE number: 1H0407311
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Diameter 1 [mm]: 23
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
• Additional information: 6680 KAMOKA
• Lisainfo: 6680 KAMOKA

• Fitting Position: transmission sided
• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 34
• Lubrication: with grease lubrication
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bellow
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-04-007
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Transmission Type: Manual Transmission
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 191407331
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Thread Size: M20X1,5
• Length [mm]: 138
• Sealing Ring Diameter [mm]: 53.2
• Lubrication: with grease lubrication
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bellow
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-04-005
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Transmission Type: Manual Transmission
• Manufacturer: BGA

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-005
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: NTY

• Fitting Position: transmission sided
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fabrication Number: NPW-VW-002
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: NTY
• Name: NTY NPW-VW-002

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Front Axle Left, transmission sided
• Transmission Type: 5-Speed Manual Transmission
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 191498103
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: GSP

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side
• Length [mm]: 139
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Transmission Type: Manual Transmission
• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 32
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Outer Diameter [mm]: 100
• Internal Toothing differential side, conn. to conn. shaft: 33
• Manufacturer: LPR

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle Right, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 191498104
• Manufacturer: GSP

• Fitting Position: Front Axle Right, transmission sided
• Transmission Type: Manual Transmission
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Wheel Side, Front Axle
• Transmission Type: Manual Transmission
• Construction Year to: 12.2004
• Thread Size: M20 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Manufacturer: JPN

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Outer Diameter [mm]: 90
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: LPR

• Construction Year to: 12.2004
• Fitting Position: Wheel Side, Front Axle
• Transmission Type: Manual Transmission
• Thread Size: M20x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 1U...X...134 201
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Bellows Material: Polychloroprene (Neoprene)
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771076230

• Fitting Position: Wheel Side, Front Axle
• Engine Code: AHF, ASV
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 138
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0034

• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: JPN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 33
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner, right, man.transm.
• Additional information: CV joint kit, front, inner, right, man.transm.

• Fitting Position: transmission sided
• Specification: Groove type: INNER
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: outer
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• General Information: Outer joint; Inner tooth30mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: transmission sided
• Inner Diameter [mm]: 33
• General Information: Inner joint; Inner tooth33mm
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, transmission sided
• Transmission Type: Manual Transmission
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Length [mm]: 34
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771057630

• Fitting Position: transmission sided, Left, Front Axle Left
• Construction Year to: 12.2004
• Quantity per packing unit: 6
• Internal Toothing wheel side: 33
• Outer Diameter [mm]: 100
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: Front Axle Right, Right, transmission sided
• Transmission Type: Manual Transmission, automatically operated
• Construction Year to: 12.2004
• Quantity per packing unit: 6
• Internal Toothing wheel side: 33
• Outer Diameter [mm]: 100
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: Inner joint; inner; 33teeth; MT; 100mm; Inner tooth33mm

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 1U...X...134 201
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771080730

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, transmission sided
• Lubrication: with grease lubrication
• Joint Type: CV Joint, Flexible Joint Disc
• Supplementary Article/Info 2: with bellow
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Diameter [mm]: 100
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Fitting Position: transmission sided, Front Axle Right
• Name: SN IJK54.002
• Manufacturer: SNR

• Vehicle Identification Number (VIN): [;8L-X-001445], [8L-X-001446;]
• Fitting Position: transmission sided, Front Axle Right
• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Name: SN IJK54.012
• Manufacturer: SNR

• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.003

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Vehicle Identification Number (VIN): [31-N-105 279;], [;8L-X-001445], [8L-X-001446;]
• Thread Size: M20x1,5
• Fitting Position: Front Axle Left, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Version: 6 balls
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.009

• Fitting Position: Front Axle Left
• Internal Toothing wheel side: 33
• General Information: Inner joint; Inner tooth33mm
• Manufacturer: VIKA

• Engine Code: AHF, ASV
• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Manufacturer: SKF
• Name: SK VKJA8001

• Engine Code: AHF, ASV
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 52.8
• Outer Diameter [mm]: 90
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Manufacturer: SKF

• Model Year to: 2000
• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to transmission: 33
• Sealing Ring Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Flexible Joint Disc
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Length [mm]: 75
• Internal Toothing wheel side: 30
• General Information: Inner joint; Inner tooth30mm; total length75mm
• Manufacturer: VIKA

• Fitting Position: transmission sided, Front Axle Right
• Transmission Type: Manual Transmission
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with top
• Bore Diameter [mm]: 8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Machined: with groove in internal component
• Joint Diameter [mm]: 90
• Length [mm]: 139
• Thread Size: M20x1.5
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: transmission sided, Front Axle Left
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with top
• Bore Diameter [mm]: 8.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.