Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Vehicle Identification Number (VIN) from: 1U-
Y- 275 062 -
Engine Code: AGP,
AQM - Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: AQM,
AGP -
Vehicle Identification Number (VIN) from: 1U-
Y- 275 062 - Block Separation:
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
- General Information: O ring
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 1U-
Y- 275 062 -
Engine Code: AGP,
AQM - Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: AQM,
AGP - Vehicle Identification Number (VIN) from: ******1U*Y*275062
- Block Separation:
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AQM,
AGP -
Vehicle Identification Number (VIN) from: 1U-
Y- 275062 - Block Separation:
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
-
Engine Code: AQM,
AGP - Vehicle Identification Number (VIN) from: ******1U*Y*275062
- Block Separation:
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: engine sided
- Sealing Ring Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Fitting Position: engine sided
- Sealing Ring Diameter [mm]: 50
- Thickness [mm]: 3.15
- Shape: O Shape
- Surface: nubby
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Quantity per packing unit: 25
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 56.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Automatic Transmission
- Model Year to: 2000
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for manufacturer number: 7920019
- Manufacturer: KAMOKA
- Forward- /Backflow: for foreflow
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Housing material: Plastic
- for OE number: 1J0122291
- Manufacturer: DELLO AUTOMEGA
- Transmission Type: Automatic Transmission
- Vehicle Equipment: for vehicles without air conditioning
- Model Year to: 2000
- Block Separation:
- Model Year from: 2001
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Manufacturer: JP GROUP A/S
- for OE number: 1J0 122 291 D
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Fitting Position: Front
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for manufacturer number: 7920034
- Manufacturer: KAMOKA
- for manufacturer number: 7920035
- Manufacturer: KAMOKA
- for manufacturer number: 7920038
- Manufacturer: KAMOKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with clip
- for OE number: 1J0 122 291
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Fitting Position: Front
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920044
- Manufacturer: KAMOKA
- for manufacturer number: 7920082
- Manufacturer: KAMOKA
- Weight [kg]: 0.051
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
-
Material: GRP
(Glass fibre Reinforced Plastic) - Number of inlets/outlets: 3
- General Information: Coolant flange
- Manufacturer: VIKA
- General Information: Coolant flange
- Manufacturer: VIKA
- for manufacturer number: 7920037
- Manufacturer: KAMOKA
- Weight [kg]: 0.031
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- General Information: Coolant flange
- Manufacturer: VIKA
- for OE number: 1J0121087B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90305
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Material: GRP
(Glass fibre Reinforced Plastic) - Number of inlets/outlets: 4
- General Information: Coolant flange
- Manufacturer: VIKA
- for manufacturer number: 7920088
- Manufacturer: KAMOKA
- Fitting Position: Lower
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- for OE number: 1J0121087A
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 58
- Supplementary Article/Info 2: without thermostat
- Name: IM 90306
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- for manufacturer number: 7920091
- Manufacturer: KAMOKA
-
Fitting Position: Lower,
Radiator -
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with clip,
with breather valve - for OE number: 6Q0 122 291F
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 1U-
V- 034000 - Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 8,
20 - for OE number: 1J0 121 087D
- Name: KONIERZ PRZEWODU PYNU VAG
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- Quantity: 1
- Weight [kg]: 0.05
- Material: Plastic
- Required quantity: 1
- General Information: Thermostat cover
- Manufacturer: VIKA
- for OE number: 1J0122291D
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 30
- Supplementary Article/Info 2: without thermostat
- Name: IM 90569
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 27
- Material: Plastic
- for OE number: 1J0122291D
- Packaging length [cm]: 7.5
- Packaging width [cm]: 7.5
- Packaging height [cm]: 8.3
- Manufacturer: MOTORAD
- Engine Code: AQM
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 47
- for OE number: 1J0122291
- Manufacturer: MEAT&DORIA
- OE-numbri jaoks: 1J0122291D
- Manufacturer: NRF
- Vehicle Equipment: for vehicles with air conditioning
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 8,
32 - for OE number: 1J0 121 087
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.082
- Fitting Position: Lower
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Housing material: Plastic
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 038121132C
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Lower
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- OE-numbri jaoks: 038121121
- Manufacturer: NRF
- for manufacturer number: 7920087
- Manufacturer: KAMOKA
-
Material: GRP
(Glass fibre Reinforced Plastic) - Number of inlets/outlets: 4
- Heating/Cooling: with thermal switch connector
- General Information: Coolant flange
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Front
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Weight [kg]: 0.031
- for OE number: 1J0 122 291 D
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Fitting Position: Front
- Weight [kg]: 0.05
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGP
- Transmission Type: Manual Transmission
- Weight [kg]: 0.047
- for OE number: 1J0 121 087 B
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0 122 291
- Fitting Position: Radiator
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
-
Fitting Position: Cylinder Head,
transmission sided - Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Weight [kg]: 0.165
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
- Fitting Position: Lower
-
Fabrication Number: CTM-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Weight [kg]: 0.03
- for OE number: 1J0 122 291 D
- Name: SW 30 94 5980
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 78
- Supplementary Article/Info 2: without thermostat
- Name: IM 90000
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Engine Code: AGP
- Transmission Type: Manual Transmission
- Weight [kg]: 0.047
- for OE number: 1J0 121 087 B
- Name: SW 33 10 3756
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Fitting Position: Front
- Weight [kg]: 0.05
- Name: SW 30 91 8230
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 1
- Weight [kg]: 0.17
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Fitting Position: Cylinder Head
- Thickness [mm]: 5
- Width [mm]: 56
- Length [mm]: 56
-
Name: Tihend,
jahutusvededelikuflants - Manufacturer: AJU
- Engine Code: AQM
- Manufacturer: FACET
-
Installatsiooni pool: Mootoriradiaator,
üleval - OE-numbri jaoks: 1J0121619
- Manufacturer: NRF
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 36
- for OE number: 3B0122291B
- Manufacturer: MEAT & DORIA
- for OE number: 1J0121100
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 88
- Supplementary Article/Info 2: without thermostat
- Name: IM 90361
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Colour: black
- Fitting Position: Lower
- Weight [kg]: 0.082
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3B0122291B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
- Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: CTM-
VW- 020 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1J0121087C
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 49
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Installatsiooni pool: radiaatori taga,
üleval - OE-numbri jaoks: 1J0121087B
- Manufacturer: NRF
- Engine Code: AQM
- Manufacturer: FACET
- Colour: black
- Fitting Position: Lower
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 30 94 6154
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.046
- for OE number: 1J0 121 087 C
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Cylinder Head
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Weight [kg]: 0.046
- for OE number: 1J0 121 087 C
- Name: SW 30 10 7181
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Behind the radiator,
Upper - Manufacturer: VERNET
- Transmission Type: Automatic Transmission
- Material: Plastic
- Number of connectors: 4
- Manufacturer: METZGER
- Weight [g]: 156
- Fitting Position: Cylinder Head
- Material: Plastic
- for OE number: 038121132C
- Colour: black
- Number of mounting bores: 2
- Packaging length [cm]: 15.9
- Packaging width [cm]: 15
- Packaging height [cm]: 11
- Manufacturer: MOTORAD
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 50
- Material: Plastic
- for OE number: 1J0121087C
- Colour: black
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 13.5
- Manufacturer: MOTORAD
- Weight [g]: 73
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- for OE number: 38121121
- Colour: grey
- Number of mounting bores: 2
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 13.5
- Manufacturer: MOTORAD
- Transmission Type: Automatic Transmission
- Vehicle Equipment: for vehicles without air conditioning
- Model Year to: 2000
- Block Separation:
- Model Year from: 2001
-
Supplementary Article/Supplementary Info: without gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Housing material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Manufacturer: VERNET
- for OE number: 038121133
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 165
- Length 1 [mm]: 190
- Supplementary Article/Info 2: without thermostat
- Inner Diameter 1 [mm]: 18
- Inner Diameter 2 [mm]: 26
- Inner Diameter 3 [mm]: 10
- Inner Diameter 4 [mm]: 49
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Upper
- Weight [kg]: 0.051
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Supplementary Info: without gasket/
seal - Height 1 [mm]: 76.5
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 49
- Fitting Position: Upper
- Material: Plastic
- for OE number: 1J0121087
- Colour: black
- Packaging length [cm]: 9.1
- Packaging width [cm]: 9.1
- Packaging height [cm]: 13.5
- Manufacturer: MOTORAD
- Engine Code: AGP
- Material: Plastic
- Manufacturer: METZGER
- Weight [kg]: 0.17
- Fitting Position: Cylinder Head
- for OE number: 038 121 132 C
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: kastipoolselt
- OE-numbri jaoks: 038121132C
- Manufacturer: NRF
- Material: Plastic
- Opening Temperature [°F]: 82
- Fitting Position: Front
- Manufacturer: 3RG
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Weight [kg]: 0.17
- for OE number: 038 121 132 C
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 32 92 3720
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AQM
- Name: EP 1.660.002
- Manufacturer: EPS
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
- for OE number: 3B0 122 291 B
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1998
- Heating/Cooling: for vehicles without extra heating
- Fitting Position: Cylinder Head
- Material: Plastic
- Manufacturer: GATES
- for OE number: 038 121 132 C
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 15
- Diameter 3 [mm]: 25
- Manufacturer: ERA
- Material: Plastic
- New Part:
- for OE number: 038121132C
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: METALCAUCHO
- Material: Aluminium
-
Fitting Position: transmission sided,
Cylinder Head - Heating/Cooling: with thermal switch connector
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Materjal: Alumiinium
-
Installatsiooni pool: Silindripea,
kastipoolselt -
Küte/Jahutus: koos termolüliti-
ühendus - Name: Jahutusvedeliku flants
- Manufacturer: MAX
Vehicle Equipment: for vehicles with electr. auxiliary heater (glow plug)
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 16
- Diameter 3 [mm]: 32
- Diameter 4 [mm]: 8
- for OE number: 1J0121087C
- Lisainfo: 93131 NIS
- Additional information: 93131 NIS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks