• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: ZLP-VW-005
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, front
• Additional information: Connecting link for stabilizer, front

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• Rod/Strut: Coupling Rod
• Material: Plastic
• Manufacturer: JP GROUP

Lisainfo: Connecting link for stabilizer, front, 21 mm stabilizer Additional information: Connecting link for stabilizer, front, 21 mm stabilizer

• Model Year from: 2001
• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, front, left
• Additional information: Connecting link for stabilizer, front, left

• Model Year from: 2001
• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Manufacturer: JP GROUP
• Lisainfo: Connecting link for stabilizer, front, right
• Additional information: Connecting link for stabilizer, front, right

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right
• for OE number: 1JD 411 315
• Rod/Strut: Push Rod
• Manufacturer: GSP

• Fitting Position: Front Axle, both sides
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Pipe Ø [mm]: 8
• for OE number: 1J0 411 315
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 1U-1-471 001, 1U-18438 501
• Block Separation:
• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Pipe Ø [mm]: 8
• for OE number: 1J0 411 315 H
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 1U-1-471 001
• Fitting Position: Front Axle both sides
• Length [mm]: 153
• Length 1 [mm]: 105
• Rod/Strut: Suspension Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Length [mm]: 336
• Pipe Ø [mm]: 10
• paired article number: 9030272
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 336
• Pipe Ø [mm]: 10
• paired article number: 9030271
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, both sides
• Rod/Strut: Coupling Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Stabiliser Bar Diameter [mm]: 23
• Vehicle Identification Number (VIN) from: 1U-18438501, 1U-1-471001, 1U-3A006219
• Vehicle Identification Number (VIN) to: 1U-78851829, 1U-4-969943, 1U-7A014010
• Block Separation:
• Fitting Position: Front Axle Right, Front Axle Left
• Rod/Strut: Coupling Rod
• Base body material: GRP (Glass fibre Reinforced Plastic)
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1J0 411 315 C
• Fitting Position: Front Axle both sides
• Rod/Strut: Suspension Rod
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: ZLT-VW-007
• Manufacturer: NTY
• Name: NTY ZLT-VW-007

• Vehicle Identification Number (VIN) to: 1U1 8438500, 1U1 471000
• Length [mm]: 105
• Thread Size: M10x1.5
• Fitting Position: Front Axle
• Required quantity: 2
• Rod/Strut: Coupling Rod
• Manufacturer: TEDGUM_TD

• Trim Level: METAL diam 23 bar
• Vehicle Identification Number (VIN) to: 1U-1-471 000
• Fitting Position: Front Axle
• Width [mm]: 40
• Height [mm]: 55
• Weight [kg]: 0.181
• Material: Plastic
• Rod/Strut: Coupling Rod
• Thread Size 1: M10x1,5
• Max. Length [mm]: 146
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF IV/BORA/A.A3
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF IV/BORA/A.A3
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length [mm]: 105
• Weight [kg]: 0.17
• External Thread [mm]: M 10x1,5
• Material: Plastic
• Inner Diameter [mm]: 10.5
• Rod/Strut: Coupling Rod
• Weight [g]: 170
• Manufacturer: METALCAUCHO

• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle
• Material: Plastic
• Length [mm]: 105
• Weight [kg]: 0.23
• Required quantity: 2
• General Information: coupling rod
• Manufacturer: VIKA

• Fitting Position: Front Axle Right, Front Axle Left, Front Axle
• Material: Plastic
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.261
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Length from [mm]: 105
• Diameter 1 [mm]: 11
• Thread Size 1: M10X1.5
• Material: Plastic
• Quality class: PJ
• Name: Stabilizer link left=right

Lisainfo: "Tootja: SRL
AUDI A3 96-99
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A3 96-99
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Left
• Rod/Strut: Coupling Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle, Right
• Rod/Strut: Coupling Rod
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) to: 1U_1_471000, 1U_18438500
• Length [mm]: 104
• Thread Size: M10X1.5 RHT
• Diameter [mm]: 23
• Material: Steel
• Rod/Strut: Suspension Rod
• paired article number: 260144
• Weight [kg]: 0.258
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Thread Size: M10 x 1,5
• Length [mm]: 105
• Inner Diameter [mm]: 11
• Name: ALT 78840AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Right, Front Axle Left
• Material: Plastic
• Rod/Strut: Coupling Rod
• Manufacturer: CORTECO
• Name: COC 49398592

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Quantity Unit: Set
• Length from [mm]: 105
• Diameter 1 [mm]: 11
• Diameter 3 [mm]: 8
• Thread Size 1: M10X1.5
• Material: Steel
• Axle Joint Thread Type: with right-hand thread
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Diameter [mm]: 10
• Thread Size 2: M10x1.5
• Material: Plastic
• Weight [kg]: 0.22
• Name: DY 30-88753
• Manufacturer: DYS

• Stabiliser Bar Diameter [mm]: 23
• for PR number: 0AE
• Length [mm]: 105.5
• Material: Plastic
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.23
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Inner Diameter [mm]: 10
• Name: ALT 93441AL
• Manufacturer: ALTE AUTOMOTIVE

• Trim Level: METAL diam 23 bar
• Vehicle Identification Number (VIN) to: 1U-1-471 000
• Fitting Position: Front Axle
• Width [mm]: 35
• Height [mm]: 57
• Weight [kg]: 0.258
• Material: Steel
• Rod/Strut: Coupling Rod
• Thread Size 1: M10x1,5
• Max. Length [mm]: 140
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A3/GOLF IV/BORA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A3/GOLF IV/BORA
(kvaliteediklass: PJ)"

• for OE number: 1J0 411 316 D
• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Manufacturer: TRUCKTEC

• Stabiliser Bar Diameter [mm]: 18, 19, 20
• Block Separation:
• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Base body material: Steel
• paired article number: 109 692
• Replace in pairs only:
• Supplementary Article/Info 2: with nut
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Stabiliser Bar Diameter [mm]: 18, 19, 20
• Block Separation:
• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Base body material: Steel
• paired article number: 109 691
• Replace in pairs only:
• Supplementary Article/Info 2: with nut
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Weight [g]: 157
• Name: IM 37502
• Manufacturer: ORIGINAL IMPERIUM

• Trim Level: METAL diam 23 bar
• Vehicle Identification Number (VIN) to: 1U-1-471 000
• Fitting Position: Front Axle
• Width [mm]: 45
• Height [mm]: 45
• Weight [kg]: 0.14
• Material: Plastic
• Rod/Strut: Coupling Rod
• Thread Size 1: 10,4
• Max. Length [mm]: 155
• Name: Stabilizer link left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A3/GOLF IV/BORA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A3/GOLF IV/BORA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Material: Metal
• Diameter [mm]: 23
• Vehicle Identification Number (VIN) to: 1U1 471000, 1U1 8438500
• Rod/Strut: Coupling Rod
• Thread Size: M10x1.5
• Width [mm]: 35
• Height [mm]: 54
• Length [mm]: 105
• Manufacturer: DELPHI
• Name: DE TC2051

• Stabiliser Bar Diameter [mm]: 23
• for PR number: 0AE
• Length [mm]: 105.5
• Material: Plastic
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.23
• Manufacturer: SWAG
• Name: SW 30 92 8579

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1U-1-471 000, 1U-18438 500
• for PR number: 0AE
• Length [mm]: 105
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.23
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Stabiliser Bar Diameter [mm]: 23
• Rod/Strut: Coupling Rod
• Material: Plastic
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818021710

• Fitting Position: Front Axle Right, Front Axle Left, Front Axle
• Material: Metal
• Rod/Strut: Coupling Rod
• Weight [kg]: 0.711
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Stabiliser Bar Diameter [mm]: 23
• Rod/Strut: Coupling Rod
• Material: Steel
• Length [mm]: 101
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818018710

• Fitting Position: Front Axle Left, Front Axle Right
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Diameter [mm]: 10
• Material: Plastic
• Weight [kg]: 0.15
• Name: DY 30-88759
• Manufacturer: DYS

• Stabiliser Bar Diameter [mm]: 23
• for PR number: 0AE
• Length [mm]: 105.5
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.294
• Supplementary Article/Info 2: with nut, with screw set
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1U-1-471 000, 1U-18438 500
• for PR number: 0AE
• Length [mm]: 105
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.23
• Manufacturer: SWAG
• Name: SW 30 76 0004

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides
• Rod/Strut: Coupling Rod
• Outer Diameter 2 [mm]: 10.1
• External Thread 2 [mm]: M10x1,5
• Length [mm]: 105
• Weight [kg]: 0.25
• Manufacturer: RTS

• Fitting Position: Front Axle, both sides
• Rod/Strut: Suspension Rod
• Material: Plastic
• Quantity per axle: 2
• Replace in pairs only:
• Manufacturer: LEMFÖRDER
• Name: LMI 3818101

SVHC: No information available, please contact the manufacturer!

• Name: Stabilizer link right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A3/VW GOLF IV/A.TT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, outer
• Vehicle Identification Number (VIN) from: 1U_1_471001, 1U_18438501
• Length [mm]: 105
• Rod/Strut: Suspension Rod
• paired article number: 260737
• Weight [kg]: 0.14
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Name: Stabilizer link left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A3/VW GOLF IV/A.TT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right, Front Axle Left, Front Axle
• Material: Metal
• Rod/Strut: Coupling Rod
• Length [mm]: 105
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Thread Size: M12x1.5
• Thread Size 1: M12x1.5x32.4x23.4
• paired article number: TC1041
• Length [mm]: 335
• Manufacturer: DELPHI
• Name: DE TC1040

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• Thread Size: M12x1.5
• Thread Size 1: M12x1.5x32.4x23.4
• paired article number: TC1040
• Length [mm]: 335
• Manufacturer: DELPHI
• Name: DE TC1041

• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• External Thread [mm]: M 10 x 1,5
• Rod/Strut: Coupling Rod
• Quality/ Grade: 10
• Weight [g]: 388
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 34
• Length [mm]: 96
• Name: IM 37518
• Manufacturer: ORIGINAL IMPERIUM

• Length [mm]: 95.5
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 33.5
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 34
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Pipe Ø [mm]: 10
• Weight [kg]: 0.42
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: FEBI BILSTEIN

Technical Information: The old bolt / nut must be replaced after every disassembly General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• paired article number: 49399701
• Name: COC 49399629
• Manufacturer: CORTECO

• Fitting Position: Front Axle Right
• Rod/Strut: Coupling Rod
• paired article number: 49399629
• Name: COC 49399701
• Manufacturer: CORTECO

• Stabiliser Bar Diameter [mm]: 19
• for PR number: 0AR
• paired article number: 19298
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Stabiliser Bar Diameter [mm]: 19
• for PR number: 0AR
• paired article number: 19296
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 95.5
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 33.5
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 34
• Material: Steel
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Pipe Ø [mm]: 10
• Weight [kg]: 0.42
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: SWAG
• Name: SW 30 92 9461

Technical Information: The old bolt / nut must be replaced after every disassembly General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• paired article number: VKDS 341004
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: SK VKDS341005
• Manufacturer: SKF

• Fitting Position: Front Axle Right
• Model Year from: 2001
• for PR number: 0AR
• Rod/Strut: Coupling Rod
• paired article number: 818 0221 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818022210

• Fitting Position: Front Axle Left
• Model Year from: 2001
• for PR number: 0AR
• Rod/Strut: Coupling Rod
• paired article number: 818 0222 10
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 818022110

• Fitting Position: Front Axle Left
• Rod/Strut: Coupling Rod
• Supplementary Article/Supplementary Info: with accessories
• Length [mm]: 336
• Thread Size: M12x1.5
• Pipe Ø [mm]: 10
• paired article number: JTS395
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Stabiliser Bar Diameter [mm]: 19
• for PR number: 0AR
• paired article number: 30 91 9296
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Right
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: SWAG
• Name: SW 30 91 9298

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Stabiliser Bar Diameter [mm]: 19
• for PR number: 0AR
• paired article number: 30 91 9298
• Material: Metal
• Rod/Strut: Coupling Rod
• Fitting Position: Front Axle Left
• Weight [kg]: 0.4
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: SWAG
• Name: SW 30 91 9296

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1M-2B000001
• for PR number: 0AQ
• Fitting Position: Front Axle, Left
• Rod/Strut: Suspension Rod
• paired article number: 38186 01
• Manufacturer: LEMFÖRDER
• Name: LMI 3818501

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Weight [kg]: 0.5
• Rod/Strut: Coupling Rod
• paired article number: L29627
• Packaging length [cm]: 41
• Packaging width [cm]: 10
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Front Axle Right
• Weight [kg]: 0.5
• Rod/Strut: Coupling Rod
• paired article number: L29628
• Packaging length [cm]: 41
• Packaging width [cm]: 10
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Front Axle, Right
• Rod/Strut: Suspension Rod
• Length [mm]: 338
• Diameter [mm]: 10
• paired article number: 38185 01
• Manufacturer: LEMFÖRDER
• Name: LMI 3818601

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 96
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 34
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 34
• Rod/Strut: Coupling Rod
• Fitting Position: Rear Axle Left, Rear Axle Right
• Pipe Ø [mm]: 10
• Weight [kg]: 0.42
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with nuts
• Manufacturer: BLUEPRINT

Technical Information: The old bolt / nut must be replaced after every disassembly General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.