• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10 mm
• Additional information: Oil seal, 35x48x10 mm

• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Manufacturer: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Manufacturer: JP GROUP
• Lisainfo: Oil seal, 35x48x10
• Additional information: Oil seal, 35x48x10

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Engine Code: AUQ
• Fitting Position: transmission sided
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: JP GROUP
• Lisainfo: Seal flange for crankshaft, rear
• Additional information: Seal flange for crankshaft, rear

• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Required quantity: 1
• Thickness [mm]: 10
• General Information: Oil seal for crankshaft; front; 35*48*10 mm
• Manufacturer: VIKA

• Fitting Position: frontal sided
• General Information: Oil seal for crankshaft; front
• Manufacturer: VIKA

• Fitting Position: frontal sided
• Observe service information:
• Swirl Type: Right-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• Dust Cover: with dust lip
• Fabrication Number: NUP-VW-011
• Manufacturer: NTY

• Required quantity: 2
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.156
• Manufacturer: ELRING
• Lisainfo: 325.155 ELR
• Additional information: 325.155 ELR

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• General Information: Oil seal for camshaft; 47*10*32
• Manufacturer: VIKA

• Required quantity: 2
• Thickness [mm]: 10
• for OE number: 068 103 085 E
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Manufacturer: TOPRAN

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Alternating Twist, Right-hand Twist
• Dust Cover: with dust lip
• Material: PTFE (polytetrafluoroethylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Fitting Position: frontal sided
• Height [mm]: 10
• Outer Diameter [mm]: 32
• Inner Diameter [mm]: 47
• Manufacturer: BGA
• Lisainfo: OS8325 BGA
• Additional information: OS8325 BGA

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

• Required quantity: 2
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Alternating Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Alternative Repair Kit: 325.155
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING

• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: FPM (fluoride rubber)
• for OE number: 034115137A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Manufacturer: CORTECO
• Name: CO 12010739

• Fitting Position: frontal sided
• Engine Code: AUQ
• Height [mm]: 10
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Material: PTFE (polytetrafluoroethylene)
• for OE number: MN980030
• Rotation Direction: Clockwise rotation
• Manufacturer: FAI

• Required quantity: 2
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Observe mounting information:
• Manufacturer: ELRING
• Lisainfo: 129.780 ELR
• Additional information: 129.780 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Required quantity: 2
• Fitting Position: frontal sided
• Engine Code: AUQ
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Manufacturer: REINZ
• Additional information: 81-34367-00 REIN
• Lisainfo: 81-34367-00 REIN

• Engine Code: AUQ
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Inner Diameter 1 [mm]: 32
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Manufacturer: CORTECO
• Name: CO 20026413
• Additional information: 20026413
• Lisainfo: 20026413

• Fitting Position: frontal sided
• General Information: Oil seal for crankshaft; front
• Manufacturer: BORSEHUNG

• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Fitting Position: frontal sided
• Height [mm]: 10
• Outer Diameter [mm]: 48
• Inner Diameter [mm]: 35
• Manufacturer: BGA USZCZELKI

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Rotation Direction: Clockwise rotation
• Material: ACM (Polyacrylate), PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: frontal sided
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Observe mounting information:
• Manufacturer: ELRING
• Lisainfo: 155.560 ELR
• Additional information: 155.560 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Engine Code: AUQ
• Fitting Position: frontal sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Name: CO 20026412
• Manufacturer: CORTECO

• Fitting Position: frontal sided
• Engine Code: AUQ
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Manufacturer: REINZ

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: frontal sided
• Engine Code: AUQ
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Manufacturer: AJUSA

• Fitting Position: transmission sided
• Fabrication Number: NUP-VW-005
• Manufacturer: NTY

• Fitting Position: transmission sided
• Engine Code: AUQ
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103171
• Manufacturer: FAI

• Fitting Position: Pulley side
• Name: CO 289076
• Manufacturer: CORTECO

• Fitting Position: transmission sided
• Weight [kg]: 0.16
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 131, 152
• Material: PTFE (polytetrafluoroethylene)
• Required quantity: 1
• Supplementary Article/Info 2: with flange
• Thickness [mm]: 15.7
• General Information: Oil sealing flange for crankshaft; rear
• Manufacturer: VIKA

• Fitting Position: frontal sided
• Required quantity: 2
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Width [mm]: 10
• SVHC: No SVHC present!
• Manufacturer: INA

• Required quantity: 2
• Engine Code: AUQ
• Block Separation:
• Fitting Position: frontal sided
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Manufacturer: AJUSA

• Fitting Position: transmission sided
• Height [mm]: 16
• Outer Diameter [mm]: 155
• Inner Diameter [mm]: 131
• Housing Type: with housing
• Manufacturer: BGA

• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Manufacturer: VIKA

General Information: Oil sealing flange for crankshaft; rear; with aluminium frame

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Housing Type: with housing
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• Thickness [mm]: 15.7
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 131, 152
• Material: PTFE (polytetrafluoroethylene)
• Fitting Position: transmission sided
• Weight [kg]: 0.16
• Supplementary Article/Info 2: with flange
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 47
• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Fitting Position: transmission sided
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Engine Code: AUQ
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with flange
• Name: RN 81-90010-00
• Manufacturer: REINZ

• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: IWD
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Observe mounting information:
• Supplementary Article/Info 2: with mounting sleeve
• Manufacturer: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Engine Code: AUQ
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange, with mounting sleeve
• Height 1 [mm]: 15.7
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Inner Diameter 1 [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103171B
• Name: CO 20020383
• Manufacturer: CORTECO

• Fitting Position: transmission sided
• General Information: Oil sealing flange for crankshaft; rear
• Manufacturer: BORSEHUNG

• Fitting Position: transmission sided
• Engine Code: AUQ
• Housing Type: with housing
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 152
• Height [mm]: 16
• Swirl Type: Left-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 06A103171A
• Manufacturer: AJUSA