• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Length [mm]: 97
• Inner Diameter 1 [mm]: 83
• Inner Diameter 2 [mm]: 22
• Material: Polychloroprene (Neoprene)
• Lisainfo: Axle boot kit, front, outer
• Additional information: Axle boot kit, front, outer

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, transmission sided
• Length [mm]: 97
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 27
• Lisainfo: Bellow Set, drive shaft
• Additional information: Bellow Set, drive shaft

• Fitting Position: Wheel Side, Front Axle both sides
• Height [mm]: 110
• Material: Rubber
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 86
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Bellows Material: Thermoplast
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 78
• Height [mm]: 114
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Wheel Side
• Outer Diameter [mm]: 23
• for shaft diameter [mm]: 84
• Supplementary Article/Info 2: with clamps
• Fabrication Number: NOP-013
• Manufacturer: NTY

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right, transmission sided
• Bellows Material: Rubber/Metal
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 100
• Height [mm]: 120
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 86
• Height [mm]: 130
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8174T
• Additional information: D8174T
• Lisainfo: D8174T

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 81
• Height [mm]: 130
• Version: UNIVERSAL BOOT KIT
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8000E
• Additional information: D8000E
• Lisainfo: D8000E

• Fitting Position: Front Axle
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 100
• Manufacturer: 3RG

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Length [mm]: 79
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 76.5
• Inner Diameter 2 [mm]: 19
• Manufacturer: GSP

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 68
• Height [mm]: 113
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8225

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 96.5
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 82.5
• Inner Diameter 2 [mm]: 21.3
• Manufacturer: GSP

• Fitting Position: Wheel Side, Front Axle both sides
• Height [mm]: 110
• Material: Rubber
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 86
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Height [mm]: 93
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 78.5
• Inner Diameter 2 [mm]: 24
• Manufacturer: GSP

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, transmission sided
• Version: One
• Length [mm]: 96.5
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 27
• Manufacturer: GSP

• Vehicle Identification Number (VIN): [8L-X-001446;]
• Inner Diameter 2 [mm]: 79
• Height [mm]: 100
• Inner Diameter 1 [mm]: 22.5
• Fitting Position: Wheel Side
• Manufacturer: SNR
• Name: SN OBK54.011

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 78
• Height [mm]: 110
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8168T

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Length [mm]: 100
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 83.5
• Inner Diameter 2 [mm]: 25
• Manufacturer: GSP OSLONY PRZEGUBOW

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 21
• Inner Diameter 2 [mm]: 99
• Height [mm]: 90
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8033

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right, transmission sided
• Length [mm]: 102
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 35
• Material: Polychloroprene (Neoprene)
• Manufacturer: JP GROUP
• Lisainfo: Axle boot kit, manuel transmission, inner right
• Additional information: Axle boot kit, manuel transmission, inner right

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Length [mm]: 79
• Inner Diameter 1 [mm]: 77
• Inner Diameter 2 [mm]: 19
• Material: Polychloroprene (Neoprene)
• Manufacturer: JP GROUP
• Lisainfo: Axle boot kit, front, outer
• Additional information: Axle boot kit, front, outer

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 35
• Inner Diameter 2 [mm]: 99
• Height [mm]: 93
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8041

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 76
• Height [mm]: 84
• Thread Size: M20x1.5
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: transmission sided, Front Axle
• Height [mm]: 120
• Weight [kg]: 0.39
• Weight [g]: 390
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Manufacturer: METALCAUCHO

• Fitting Position: Wheel Side, Front Axle Right, Front Axle Left
• Inner Diameter 2 [mm]: 77
• Height [mm]: 132
• Name: SN OBK10.001
• Manufacturer: SNR

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right, transmission sided
• Length [mm]: 101.5
• Material: Polychloroprene (Neoprene)
• for OE number: 191498202
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 35
• Manufacturer: GSP

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 84
• Height [mm]: 83
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Transmission Type: Manual Transmission
• Length [mm]: 120
• Material: Rubber
• Fitting Position: Front Axle Right, transmission sided
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 357498201A
• Fitting Position: transmission sided, Front Axle Left
• Material: Thermoplast
• Weight [g]: 136
• Supplementary Article/Info 2: with flange
• Length [mm]: 110
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Name: IM 37369/TE
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Front Axle
• General Information: Dust cover for outer joint
• Manufacturer: VIKA

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 89
• Height [mm]: 125
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8268T

• Fitting Position: Wheel Side, Front Axle
• Height [mm]: 146
• Joint Type: Universal Joint
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 86
• Manufacturer: SKF

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Height [mm]: 115
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8582T

• Fitting Position: Wheel Side
• Weight [kg]: 0.25
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Length [mm]: 115
• Material: Thermoplast
• General Information: Dust cover for outer joint
• Manufacturer: VIKA

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Height [mm]: 110
• Manufacturer: AUTOFREN SEINSA
• Name: SE D8294T

• Vehicle Identification Number (VIN): [;8L-X-001445], [8L-X-001446;]
• Inner Diameter 1 [mm]: 35
• Inner Diameter 2 [mm]: 56
• Height [mm]: 101.5
• Manufacturer: SNR /NTN-SNR/
• Name: SN IBK54.005

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 72
• Height [mm]: 97
• Name: SN OBK10.005
• Manufacturer: SNR

• Engine Code: AZH, AZJ
• Fitting Position: Wheel Side, Front Axle
• Height [mm]: 119
• Joint Type: CV Joint
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 84.5
• General Information: Rubber as alternative
• Manufacturer: SKF
• Name: SK VKJP3112R

• Fitting Position: Front Axle, Wheel Side
• Height [mm]: 146
• Joint Type: Universal Joint
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 86
• Name: SK VKJP01001S
• Manufacturer: SKF

• Vehicle Identification Number (VIN): [8L-X-001446;]
• Material: Rubber
• Inner Diameter 1 [mm]: 23
• Height [mm]: 115
• Inner Diameter 2 [mm]: 77
• Fitting Position: Wheel Side
• Name: SN OBK54.021
• Manufacturer: SNR

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 74
• Required quantity: 2
• Length [mm]: 105
• Material: Thermoplast
• General Information: Dust cover for inner joint
• Manufacturer: VIKA

• Fitting Position: transmission sided, Front Axle Right
• Transmission Type: Manual Transmission
• Engine Code: AZH
• Inner Diameter 1 [mm]: 35
• Inner Diameter 2 [mm]: 100
• Height [mm]: 116
• Supplementary Article/Info 2: with top
• Joint Type: Flexible Joint Disc
• Bore Diameter [mm]: 8.7
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: Rubber/Metal
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: Manual Transmission
• Production date from: 10/00
• Production date to: 09/01
• Material: Thermoplast
• for OE number: 1K0498203
• Manufacturer: SASIC

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Inner Diameter 1 from [mm]: 20
• Inner Diameter 1 to [mm]: 24
• Inner Diameter 2 from [mm]: 81
• Inner Diameter 2 to [mm]: 93
• Height [mm]: 110
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO
• Additional information: 190975
• Lisainfo: 190975

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Transmission Type: Manual Transmission
• Fitting Position: Rear Axle, Wheel Side
• Production date from: 10/00
• Production date to: 09/01
• Material: Thermoplast
• for OE number: 1K0498203B
• Manufacturer: SASIC

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 75
• Height [mm]: 109
• Thread Size: M20x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Rear Axle Left, Wheel Side, Rear Axle Right
• Block Separation:
• Length [mm]: 109
• Material: Thermoplast
• Inner Diameter 1 [mm]: 26
• Weight [kg]: 0.44
• Inner Diameter 2 [mm]: 78
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle both sides
• Height [mm]: 125
• Material: Thermoplast
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 86
• Manufacturer: METALCAUCHO

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Length [mm]: 115
• Material: Thermoplast
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Weight [kg]: 0.25
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 86
• Height [mm]: 120
• only in connection with: 4A0 407 643 A
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO
• Lisainfo: C304328
• Additional information: C304328

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Length [mm]: 115
• Thread Size: M20x1,5
• Material: Thermoplast
• SVHC: No SVHC present!
• Manufacturer: FAG-PRZEGUBY I POLOSIE

• Length [mm]: 126
• Outer Diameter [mm]: 21, 60, 72, 82, 83
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Height [mm]: 126
• Weight [kg]: 0.26
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Manufacturer: FEBI
• Lisainfo: 27730 FEBI
• Additional information: 27730 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Wheel Side, Rear Axle Right
• Block Separation:
• Length [mm]: 109
• Material: Thermoplast
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 78
• Weight [kg]: 0.44
• Observe service information:
• Name: SW 30 83 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side
• Length [mm]: 113
• Material: PVC
• Joint Type: CV Joint
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 86
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Length [mm]: 115
• Material: Thermoplast
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Weight [kg]: 0.25
• Observe service information:
• Name: SW 30 92 9609
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 from [mm]: 19
• Inner Diameter 1 to [mm]: 23
• Inner Diameter 2 from [mm]: 69
• Inner Diameter 2 to [mm]: 79
• Height [mm]: 100
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Height [mm]: 115
• Material: Thermoplast
• Name: SE D8571T
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 86
• Height [mm]: 120
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle Left, Rear Axle
• Block Separation:
• Pikkus (mm): 116
• Siseläbimõõt 1 [mm]: 27
• Siseläbimõõt 2 (mm): 100
• Manufacturer: JPN

• Fitting Position: Front Axle Left, transmission sided, Rear Axle
• Transmission Type: Manual Transmission
• Block Separation:
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Length [mm]: 115
• Material: Thermoplast
• Supplementary Article/Info 2: with flange
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 772025030

• Fitting Position: Front Axle Left, transmission sided
• Production date from: 10/00
• Production date to: 09/01
• Material: Thermoplast
• for OE number: 1K0498201
• Manufacturer: SASIC

• Engine Code: AZJ, AZH
• Fitting Position: Wheel Side, Front Axle
• Height [mm]: 115
• Material: Thermoplast
• Joint Type: CV Joint
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 87
• Manufacturer: SKF
• Name: SK VKJP3112

• Model Year from: 2001
• Fitting Position: transmission sided
• Material: PVC
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Slim Set:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Wheel Side
• Inner Diameter 1 from [mm]: 20
• Inner Diameter 1 to [mm]: 27
• Inner Diameter 2 from [mm]: 78
• Inner Diameter 2 to [mm]: 90
• Height [mm]: 116
• Material: Rubber
• Joint Type: Universal Joint
• Inner Diameter 1 [mm]: 20
• Inner Diameter 2 [mm]: 78
• Name: SK VKJP01018
• Manufacturer: SKF

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 1U-X-134201
• Block Separation:
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Height [mm]: 110
• Bellows Material: Thermoplast
• Full Set:
• Manufacturer: TOPRAN HANS PRIES

Fitting Position: Front Axle, transmission sided, Rear Axle Left, Rear Axle Right General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AZH, AZJ
• Fitting Position: Front Axle, transmission sided
• Height [mm]: 120
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Manufacturer: SKF
• Name: SK VKJP6004

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle Left, Rear Axle
• Block Separation:
• Length [mm]: 116
• Material: Rubber
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Weight [kg]: 0.127
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AZH, AZJ
• Height [mm]: 120
• Inner Diameter 1 [mm]: 36
• Inner Diameter 2 [mm]: 100
• Length [mm]: 120
• Fitting Position: transmission sided, Front Axle
• Slim Set:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle Left, Rear Axle
• Block Separation:
• Length [mm]: 116
• Material: Rubber
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Observe service information:
• Name: SW 30 93 8365
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 113
• Material: Thermoplast
• Fitting Position: Front Axle, Wheel Side
• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 88
• Weight [kg]: 0.25
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.