• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

Engine Code: APK, AQY

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Oxygen Sensor: Planar Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 750
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135332
• Manufacturer: HITACHI

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year from: 05.2001
• Construction Year to: 10.2002
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Vehicle Identification Number (VIN) to: 1U-3-724 128, 1U-38-683 064, 1U-3A-009 066
• Engine Code: AZJ
• Cable Length [mm]: 1,530
• Manufacturer: DELPHI
• Name: DE ES20166-12B1

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Fitting Position: after catalytic converter
• Cable Length [mm]: 909
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Transmission Type: Manual Transmission
• Engine Code: AZH
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: D Shape
• Cable Length [mm]: 625
• Thread Size: M18 x 1,5
• for OE number: 021 906 262 C
• Length [mm]: 800
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV694
• Manufacturer: ESEN SKV

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• for OE number: 06A906262AS
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Heated
• Number of pins: 4
• Total Length [mm]: 780
• Manufacturer: ERA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 1 750
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Engine Code: AZH, AZJ
• Oxygen Sensor: Diagnostic Probe
• Ülekandeliinide arv: 4
• Piirangutega toode/piirangu info 2: ilma pistikuta
• Manufacturer: NGK

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 750
• Technical Information Number: Universal 77015
• Socket colour: black
• Manufacturer: FAE

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV644
• Manufacturer: ESEN SKV

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 650
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV706

• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 470
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Engine Code: AEG, APK, AQY, AZH
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986615

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 03.2002
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Engine Code: AZJ
• Cable Length [mm]: 740
• Manufacturer: DELPHI
• Name: DE ES20348-12B1

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AZJ
• Construction Year from: 03.2002
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 800
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV705

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 330
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Conductor Number: 4
• Length [mm]: 721
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 721
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM001

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 550
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AZJ
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Length [mm]: 1,700
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Catalytic Converter Type: for vehicles with catalytic converter
• Cable Length [mm]: 1,700
• Number of pins: 4
• Number of circuits: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Fitting Position: after catalytic converter
• Cable Length [mm]: 954
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Engine Code: AZH
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 700
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year from: 03.2002
• Transmission Type: Manual Transmission
• Engine Code: AZJ
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZJ
• Construction Year from: 03.2002
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Overall Length [mm]: 1,510
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 06C906265
• Quality: OE
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Oxygen Sensor: Heated
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Diagnostic Probe
• Engine Code: AZJ
• Construction Year from: 03.2002
• Length [mm]: 720
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258006980

• Engine Code: AEG, APK, AQY
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258006978

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Engine Code: AZJ, AZH
• Length [mm]: 1,500
• Number of pins: 6
• for article number: 77030
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 11.2002
• Length [mm]: 1,100
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258010032

Engine Code: APK, AQY

• Oxygen Sensor: Regulating Sensor
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• for article number: 77032
• Manufacturer: FAE

• Transmission Type: Manual Transmission
• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 950
• Number of circuits: 4
• Manufacturer: VDO

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Engine Code: AZH
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 730
• Connector Shape: D Shape
• Conductor Number: 4
• Cable Length [mm]: 600
• Thread Size: M18 x 1,5
• Housing Colour: black
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Heated
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 1,510
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 1,510
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM150

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• Overall Length [mm]: 750
• General Information: Lambda sensor
• Manufacturer: BORSEHUNG

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Fitting Position: before catalytic converter
• Cable Length [mm]: 950
• Manufacturer: DELPHI
• Name: DE ES10921-12B1

Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated

• Engine Code: AZH
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 465
• Number of connectors: 4

• Oxygen Sensor: Heated
• Conductor Number: 5
• General Information: Lambda sensor; 5 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,16
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV911

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor
• Exhaust System: before catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV907
• Manufacturer: ESEN SKV

• Engine Code: AZH, AZJ
• Number of pins: 5
• Connector Shape: D Shape
• Cable Length [mm]: 1,360
• Fitting Position: Exhaust Manifold
• Oxygen Sensor: Broadband Oxygen Sensor
• Quality: OE EQUIVALENT
• for OE number: 022906262H
• Manufacturer: MEAT & DORIA

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Cable Length [mm]: 1,500
• Number of pins: 6
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PA009166821
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AZH, AZJ
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 760
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 5
• Thread Size: M18 x 1,5
• Connector Shape: D Shape
• Cable Length [mm]: 1,510
• Supplementary Article/Supplementary Info: with cable tie
• Oxygen Sensor: Broadband Oxygen Sensor, Thread pre-greased
• Number of circuits: 5
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.