Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Oxygen Sensor: Diagnostic Probe
- Number of circuits: 4
- Overall Length [mm]: 750
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 510
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 480
- Oxygen Sensor: Planar Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- General Information: Fuel temperature sensor
- Manufacturer: VIKA
- Additional information: VIK99061780801
- Lisainfo: VIK99061780801
- Number of pins: 4
- Socket colour: dark green
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 059919501
- Manufacturer: MEAT&DORIA
-
Fabrication Number: ECM-
AU- 002 - Manufacturer: NTY
-
Name: NTY ECM-
AU- 002
Lisainfo: ENG.1.0,1.2,1.4,1.6,1.6LPG,2.0FSI,AUDI A3 03-12, VW GOLF IV/V/VI,POLO 01-12,TOURAN 03-10, SKODA OCTAVIA I/II, ROOMSTER 06-15,SEAT IBIZA,TOLEDO II/III, LEON Additional information: ENG.1.0,1.2,1.4,1.6,1.6LPG,2.0FSI,AUDI A3 03-12, VW GOLF IV/V/VI,POLO 01-12,TOURAN 03-10, SKODA OCTAVIA I/II, ROOMSTER 06-15,SEAT IBIZA,TOLEDO II/III, LEON
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AXP
- Housing Colour: green
- Corresponds to the original part in colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: AXP
- Housing Colour: green
- Corresponds to the original part in colour: black
- Manufacturer: FACET
- Supplementary Article/Info 2: without cable
- Socket colour: black
-
Fabrication Number: ESS-
VW- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 4
- Connector Shape: D Shape
- Socket colour: green
- Fitted Diameter [mm]: 20
- Diameter [mm]: 25.5
- for OE number: 059919501A
- Manufacturer: MEAT & DORIA
- Number of pins: 4
- Housing Colour: green
- Connector Shape: round
- Fitted Diameter [mm]: 20
- Manufacturer: FAE ELEKTRYKA
- General Information: Intake air temperature sensor
- Manufacturer: VIKA
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 059 919 501 A
- Colour Coding: green
- Spring Design: Retaining Spring
- Number of pins: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AXP
- Construction Year to: 09.2004
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
- Engine Code: AXP
- Construction Year to: 09.2004
- Manufacturer: FACET
- Number of pins: 4
- Fitted Diameter [mm]: 20
- Housing Colour: green
- Manufacturer: FAE
- Number of pins: 3
- for OE number: 036 907 601 E
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Engine Code: AXP
- Fitting Depth [mm]: 24
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: MAX
Manufacturer: MAGNETI MARELLI
- Engine Code: AXP
- Required quantity: 2
- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- for OE number: 1205185
- Manufacturer: MEAT&DORIA
- for OE number: 36907601
- Sensor Type: Active sensor
- Manufacturer: KAMOKA
- Plug housing design: Plug sleeve housing
- Manufacturer Restriction: VAG
- Cable Length [mm]: 500
- Number of pins: 2
- Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- Current carrying capacity [A]: 9
- Operating voltage [V]: 24
-
for OE number: 1J6 943 021 B,
1JE 943 021, 1K8 943 021 C - for article number: 70660022
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
- Manufacturer: HBE
Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV237
- Number of pins: 3
- Connector Shape: oval
- General Information: Camshaft position sensor
- Manufacturer: VIKA
- Weight [kg]: 0.48
- Number of connectors: 2
- Colour: black
- General Information: Knock sensor
- Manufacturer: VIKA
- General Information: Air intake pressure sensor
- Manufacturer: VIKA
- Colour: black
- Number of pins: 2
- Weight [kg]: 0.058
- Manufacturer: ERA
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
-
Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW GOLF 1,
4 97- - Manufacturer: BRM
- Voltage [V]: 12
- Supplementary Article/Info 2: with integrated air temperature sensor
- Pressure from [kPA]: 20
- Pressure to [kPA]: 11
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 3
- Connector Shape: D Shape
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 24
- Quality: OE EQUIVALENT
- for OE number: 0986280420
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- Length [mm]: 68
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 4
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV487
- Engine Code: AXP
- Pressure from [kPA]: 15
- Pressure to [kPA]: 120
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE ELEKTRYKA
- Engine Code: AXP
- Housing Colour: black
- Name: EP 1.957.144
- Manufacturer: EPS
- Number of pins: 4
- Plug Type: Female
- Number of circuits: 4
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 250
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 0.5
- Manufacturer: 3RG
- Engine Code: AXP
- Housing Colour: black
- Manufacturer: FACET
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Fabrication Number: ESL-
AU- 007 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Manufacturer: MAGNETI MARELLI
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: D Shape
- Number of pins: 3
- Fitting Depth [mm]: 24.3
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Required quantity: 1
-
Name: CZUJNIK CIN. POWIETRZA VW GOLF 1,
6 05- - Manufacturer: BRM
- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 06B 906 051
- Manufacturer: TRUCKTEC
- Height [mm]: 24
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- General Information: Crankshaft position sensor
- Manufacturer: VIKA
- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Väändejõud [Nm]: 20
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Pistikute teostus: Lamepistik
- Pistikukatte kuju: ovaalne
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6PG013114301
- Manufacturer: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.48
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS
- Number of pins: 2
- Manufacturer: DELPHI
- Name: DE AS10169
- Number of pins: 4
- Supplementary Article/Info 2: with integrated air temperature sensor
- Pressure from [kPA]: 17
- Pressure to [kPA]: 117
- for OE number: 06B906051
- Manufacturer: MEAT&DORIA
- Cable insulation material: Silicone
-
Manufacturer Restriction: Ford,
VAG - Number of pins: 4
- Cable Length [mm]: 200
-
Contact surface: gold-
plated - Socket Width [mm]: 1.5
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable Cross Section [mm²]: 0.75
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
pesuri mootor - Manufacturer: HBE
for OE number: 03G 906 051 E, 038 906 051 D, 0 261 230 073, 0 281 002 976, 1136735, 2085160
- Oxygen Sensor: Regulating Sensor
- Number of circuits: 4
- Manufacturer: KAMOKA
- Fitting Depth [mm]: 24.3
- Number of connectors: 3
- Number of mounting bores: 1
- Rated Voltage [V]: 12
-
Operating temperature from [°C]: -
40 - Operating temperature to [°C]: 125
- Sensor Type: Hall Sensor
- Connector Shape: D Shape
- Colour: black
- Name: SN CMP154.03
- Manufacturer: SNR
- Number of pins: 4
- Pressure from [kPA]: 23
- Manufacturer: DELPHI
- Name: DE PS10123
- Number of pins: 3
- Fitting Depth [mm]: 36
- Weight [kg]: 0.031
- Manufacturer: ERA
- Voltage [V]: 12
- Corresponds to the original part in colour: black
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Quantity: 1
- for model code: 4 Pin
- Number of pins: 4
- Pressure from [kPA]: 21
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: DLP
- Supplementary Article/Info 2: for camshaft
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: AXP
- Number of pins: 2
- Colour: black
- Name: Detonatsiooniandur
- Manufacturer: VDO
Cable Repair Kit,
METZGER AUTOTEILE
- Number of pins: 4
- Plug Type: Female
- Number of circuits: 4
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 250
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 0.5
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER
- Observe technical data:
- Fitting Position: before catalytic converter
- Manufacturer Restriction: VAG
- Number of pins: 6
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
- Socket Width [mm]: 2.8
-
Contact surface: Tin-
plated -
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE
- Number of connectors: 4
- Weight [kg]: 0.025
- for OE number: 06B 906 051
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- alternatively:
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Length [mm]: 62
- Width [mm]: 23
- for OE number: 036 907 601 E
- Height [mm]: 45
- Required quantity: 1
- Colour: black
- Operating Mode: Electric
-
Sensor Type: Active sensor,
Hall Sensor - Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 24
-
Supplementary Article/Info 2: with seal ring,
without cable - Housing Colour: black
- Connector Shape: D Shape
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 09.2004
-
Engine Code: AXP,
BCA - Sensor Type: Hall Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: VAL
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)"
- Number of connectors: 3
- Weight [kg]: 0.035
- for OE number: 036 907 601 E
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Depth [mm]: 24.3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: TRI
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 750
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 115
- Manufacturer: VDO
- Engine Code: AXP
- Manufacturer: FACET
- Name: EP 1.953.269
- Montaaživiis: kruvitud
- Pistikkontaktide arv: 4
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
Name: Andur,
ohuvotu rohk - Manufacturer: HEL
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AXP
- Manufacturer: FACET
- Number of connectors: 3
- Weight [kg]: 0.035
- for OE number: 036 907 601 E
- Name: SW 30 93 7510
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: MAGNETI MARELLI
-
Name: Andur,
ohuvotu rohk - Manufacturer: BOS
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 36
- for OE number: 070907601A
- Manufacturer: MEAT&DORIA
- Number of pins: 3
- Fitting Depth [mm]: 24
- Housing Colour: black
- Weight [kg]: 0.035
- Manufacturer: ERA
- for OE number: 6Q1 721 503 C
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Number of pins: 6
- Connector Shape: rectangular
-
Fabrication Number: EAP-
AU- 000 - Manufacturer: NTY
-
Name: NTY EAP-
AU- 000
- Number of pins: 4
- Pressure from [kPA]: 20
- Pressure to [kPA]: 115
- Manufacturer: FAE
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Quantity: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PG009108561
- Manufacturer: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: AXP
- Pressure from [kPA]: 15
- Pressure to [kPA]: 120
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Name: EP 1.993.084
- Manufacturer: EPS
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
- Engine Code: AXP
- Pressure from [kPA]: 15
- Pressure to [kPA]: 120
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.75
- Manufacturer: FACET
-
Engine Code: AXP,
BCA - for OE number: 06B 906 051
- Operating Mode: pneumatic
- Manufacturer: PIERBURG
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 002 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Planar Sensor
- Guarantee: 5 years guarantee
- Overall Length [mm]: 750
- Number of circuits: 4
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 135332
- Manufacturer: HITACHI
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: Front
- Length [mm]: 940
- Number of connectors: 4
- Manufacturer: VERNET
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 760
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV694
- Manufacturer: ESEN SKV
- Conductor Number: 4
- Length [mm]: 721
- Resistor [Ohm]: 9
- Number of circuits: 4
- Cable Length [mm]: 721
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Engine Code: AXP
- Oxygen Sensor: Unheated
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- for OE number: 06A906262AS
- Manufacturer: MEAT&DORIA
-
Engine Code: AXP,
BCA - Oxygen Sensor: Diagnostic Probe
- Ülekandeliinide arv: 4
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Name: LAMBDA ANDUR
- Manufacturer: NTK
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Block Separation:
- Construction Year from: 11.2009
- Fitting Position: after catalytic converter
- Cable Length [mm]: 700
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 580
- Weight [kg]: 0.097
- for OE number: 06A 906 262 AH
- Name: SW 33 10 3202
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer Restriction: Benzineinspritzung
- Voltage [V]: 12
- Number of pins: 4
-
Pressure [Pa] from: 20,
000 -
Pressure [Pa] to: 115,
000 - Version: IAM
- Article number of recommended accessories: 2324099
- Manufacturer: METZGER
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 650
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV706
Manufacturer: BOSCH
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 11.2009
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 740
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Construction Year to: 10.2009
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Fabrication Number: EAP-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 550
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Construction Year to: 01.2002
- Engine Code: AXP
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Connector Shape: D Shape
- Cable Length [mm]: 225
-
Thread Size: M18 x 1,
5 - Length [mm]: 350
- Number of pins: 4
-
Version: ZR-
PLANAR -
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 10.2009
-
Fitting Position: Front,
after catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 720
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AXP
-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
-
Length [mm]: 1,
500 - Name: LAMBDA ANDUR
- Manufacturer: MAX
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 36
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Connector Shape: D Shape
- Resistor [kOhm]: 34
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AXP
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 -
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 5
-
Overall Length [mm]: 1,
510 - Oxygen Sensor: Regulating Sensor
- Manufacturer: JP GROUP
- Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
- Construction Year to: 01.2002
- Engine Code: AXP
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Planar Sensor,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 720
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Weight [kg]: 0.17
- Manufacturer: VALEO
- Name: VA 368041
- Engine Code: BCA
- Construction Year from: 11.2009
- Fitting Position: before soot particulate filter
- Oxygen Sensor: Heated
- Length [mm]: 645
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 740
- Weight [kg]: 0.095
- Name: SW 30 93 4388
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Manual Transmission, Manual Transmission - Number of mounting bores: 3
- Number of pins: 6
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year to: 01.2002
- Engine Code: AXP
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: brown
- Connector Shape: D Shape
-
Thread Size: M18 x 1,
5 - Length [mm]: 570
- for OE number: 06A 906 262 F
- Cable Length [mm]: 570
- Number of pins: 4
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 10.2009
-
for OE number: 036906262H,
022906262BG - Thread Size: M18x1.5
- Cable Length [mm]: 650
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 189
- Gross Weight [g]: 222
- Manufacturer: DENSO
-
Name: DN DOX-
2000 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
- Construction Year from: 11.2009
-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor - Fitting Position: after catalytic converter
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
-
Length [mm]: 1,
500 - Number of pins: 6
- for article number: 77030
- Manufacturer: FAE
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 760
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated, Planar Sensor General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Length [mm]: 1,
510 - Conductor Number: 5
- Number of circuits: 5
-
Cable Length [mm]: 1,
510 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Oxygen Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- Overall Length [mm]: 750
- General Information: Lambda sensor
- Manufacturer: BORSEHUNG
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
- Construction Year to: 09.2004
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Oxygen Sensor: Broadband Oxygen Sensor
- Quality: OE EQUIVALENT
- for OE number: 022906262H
- Manufacturer: MEAT&DORIA
- Fitting Position: before catalytic converter
- Quantity: 1
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated
- Construction Year from: 10.2009
-
Oxygen Sensor: Diagnostic Probe,
Heated - Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 940
- Manufacturer: PIERBURG
-
Engine Code: AXP,
BCA -
Construction Year from: 08.2001,
01.2002 -
Construction Year to: 01.2002,
08.2002 -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Transmission Type: Automatic Transmission
- Vehicle Identification Number (VIN) from: 1U..2..566 263
- Block Separation:
- Vehicle Identification Number (VIN) to: 1U..3..706 896
- Manufacturer: BOSCH
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 400
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV871
- Manufacturer: ESEN SKV
- Construction Year to: 09.2004
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 470
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV860
- Manufacturer: ESEN SKV
- Construction Year from: 06.2004
-
Exhaust System: for pre-
catalytic converter - Engine Code: BCA
- Cable Length [mm]: 340
-
Oxygen Sensor: Switching-
type Oxygen Sensor, Heated -
Name: DE ES11015-
12B1 - Manufacturer: DELPHI
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: Lambda sensor; 5 wire
- Manufacturer: VIKA
- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV911
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Oxygen Sensor: Regulating Sensor
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV907
- Manufacturer: ESEN SKV
- Construction Year to: 09.2004
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 510
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV
- Fitting Position: before catalytic converter
- Required quantity: 1
- Oxygen Sensor: Regulating Sensor
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Name: SONDA LAMBDA VV GOLF IV, TRANSPORTER, PHAETON 1,4-6,0 97-
- Construction Year to: 01.2002
- Transmission Type: Manual Transmission
- Engine Code: AXP
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 650
- Number of circuits: 4
- Manufacturer: VDO
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Manufacturer: BOSCH
- Fitting Position: Front
- Quantity: 1
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
-
Cable Length [mm]: 1,
510 - Supplementary Article/Supplementary Info: with cable tie
-
Oxygen Sensor: Broadband Oxygen Sensor,
Thread pre- greased - Number of circuits: 5
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2000
-
Vehicle Identification Number (VIN) to: 1U-
V- 028 927 - Colour: black
- Number of pins: 3
- Manufacturer: VDO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks