• Construction Year to: 06.2004
• Vehicle Identification Number (VIN) to: 1U3-634881/38569351
• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Construction Year to: 06.2004
• Vehicle Identification Number (VIN) to: 1U3-634881/38569351
• Lisainfo: Water pump
• Additional information: Water pump

• Fabrication Number: CPW-VW-036
• Manufacturer: NTY

• Number of pins (input) [-pin connector]: 3
• Number of pins (output) [-pin connector]: 2
• Plug Type: Female
• Vehicle Equipment: for vehicles with parking heater
• Number of circuits: 2
• Material: CuSn (copper-tin)
• Cable Length [mm]: 360
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Cable insulation material: Silicone
• Article number of recommended accessories: 2221059
• Manufacturer: METZGER

for OE number: 1K0965561, 1K0965561A, 1T0965561, 3C0965561, 7N0965561, 7N0965561A, 7N0965561B

• Housing Type: without housing
• Manufacturer: DENCKERMANN FILTRY

• Number of Teeth: 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

Manufacturer: DENCKERMANN FILTRY

• Number of Teeth: 19
• Pulleys: with belt pulley
• Manufacturer: DENCKERMANN FILTRY

• Number of Teeth: 19
• Number of blades/vanes: 8
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)"

• Engine Code: ATD
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1161

• Vehicle Identification Number (VIN) from: 1U-3-634 882
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Operating Mode: Mechanical
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SUPERB, 02.02-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SUPERB, 02.02-
(kvaliteediklass: PJ)"

• for OE number: 038121011H
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 19
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 1U3634882/38569352
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 038 121 011D
• Quality class: PJ
• Name: Water pump

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl)

• Vehicle Identification Number (VIN): 1U3634882
• Vehicle Identification Number (VIN) from: 38569352
• Water pump impeller material: Sheet Steel
• Number of Teeth: 19
• Overall Height [mm]: 99
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Hammastehulk: 19
• Manufacturer: JPN

• General Information: water pump
• Manufacturer: VIKA

• General Information: water pump
• Manufacturer: VIKA

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 1U3634882/38569352
• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: GRAF

• Vehicle Equipment Line/Variant: TB
• for OE number: 03L121011GX
• Weight [kg]: 0.9
• Name: DA DP064
• Manufacturer: DAYCO
• Additional information: DP064
• Lisainfo: DP064

• New Part:
• Weight [kg]: 0.78
• Manufacturer: DOLZ
• Name: DO A251

• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Manufacturer: SKF
• Name: SK VKPC81230

• Engine Code: ATD
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1201

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Construction Year from: 04.2002
• Engine Code: ATD
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1206

• Engine Code: ATD
• Manufacturer: MAGNETI MARELLI

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 32 92 4360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT SILNIK

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ATD
• for OE number: 03L 121 011 G
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Info 2: with seal ring
• Manufacturer: PIERBURG

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538008910

• Construction Year to: 06.2004
• Vehicle Identification Number (VIN) to: 1U3-634881 / 3856935
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Belt Pulley Ø [mm]: 56.2
• Weight [kg]: 0.8
• Manufacturer: VALEO
• Name: VA 506886

• Weight [kg]: 0.793
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTITECH

• Engine Code: ATD
• Supplementary Article/Info 2: with seal ring
• Operating Mode: Mechanical
• Water pump impeller material: Metal
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358304631
• Manufacturer: HELLA

• Vehicle Identification Number (VIN) to: 1U-3-634 881
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• old version:
• Manufacturer: HEPU

• Vehicle Identification Number (VIN) to: 1U-3-634 881
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• Manufacturer: HEPU

• Construction Year from: 01.2004
• Voltage [V]: 12
• for OE number: 7N0965561
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: ATD
• Manufacturer: MAGNETI MARELLI

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HT -KTBWP
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Full Set:
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.1
• Manufacturer: DAYCO
• Name: DA KTBWP3423
• Additional information: KTBWP3423 DAYCO
• Lisainfo: KTBWP3423 DAYCO

• Number of Teeth: 120
• Width [mm]: 30
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD036

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD105

• Width [mm]: 30
• Water pump impeller material: Metal
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Weight [kg]: 1.8
• Units/Pulleys: incl. tensioner pulley, incl. deflection pulley
• for OE number: 038 198 119 S1
• Manufacturer: FEBI BILSTEIN

Vehicle Identification Number (VIN) to: ******1U*2A006980, ******1U*32704906, ******1U*38677465 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth: 120
• Manufacturer: SNR
• Name: SN KDP457.490

• Supplementary Article/Info 2: without tensioner pulley damper
• Construction Year to: 12.2004
• Engine Number to: 211245
• Vehicle Identification Number (VIN) to: 1U3634881
• Hammastehulk 1: 120
• Laius 1 (mm): 30
• Manufacturer: METELLI ROZRZAD

• Driven Units: Camshaft
• Vehicle Equipment Line/Variant: HT -KTBWP
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Full Set:
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.1
• Manufacturer: DAYCO
• Name: DA KTBWP2961

• Engine Number from: 211 246
• Article number of the recommended special tool: VKN 1000
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC01250-1

• Engine Number from: 341801
• for components see parts list:
• Pulleys contained: 2
• Number of belts: 1
• Supplementary Article/Supplementary Info: with water pump
• Observe system fill quantity:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle type: W/O DAMPER
• Number of belts: 1
• Weight [kg]: 2.06
• Name: AI WPK-199805
• Manufacturer: AIRTEX

• Engine Number from: 211246
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Manufacturer: BOSCH
• Name: BS 1987946477

• Engine Number to: 211 215
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Supplementary Article/Info 2: without tensioner element
• Manufacturer: BOSCH

• Construction Year from: 10.2002
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530020132
• Lisainfo: 530020132
• Additional information: 530020132

• Construction Year to: 09.2002
• Driven Units: Camshaft
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 1U6634882
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Manufacturer: METELLI ROZRZAD

• Construction Year to: 09.2002
• alternatively:
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530009131

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth: 120
• Manufacturer: SNR
• Name: SN KDP457.270

• Number of Teeth: 120
• Width [mm]: 30
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 1.8
• Manufacturer: AKSDASIS

• Construction Year from: 09.2002
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Water pump impeller material: Metal
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Weight [kg]: 1.85
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Engine Code: ATD, AXR
• Vehicle Identification Number (VIN) from: 1U-2A006 981, 1U-32704 907, 1U-38677 466
• Block Separation:
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 2.093
• Width [mm]: 30
• Manufacturer: CONTITECH

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Construction Year from: 09.2002
• Engine Code: ATD
• Length [mm]: 1,143
• Manufacturer: MAGNETI MARELLI

• Engine Number to: 211 245
• Vehicle Identification Number (VIN) to: 1U-3-634 881
• Rihmade arv: 1
• Laius (mm): 30
• Hammastehulk: 120
• Piirangutega toode/piirangu info 2: ilma pingutipehmenduseta,pingutusrull
• valikuliselt:
• Manufacturer: HEPU

• Number of belts: 1
• Width 1 [mm]: 30
• Number of track rollers: 3
• Number of Teeth: 120
• Manufacturer: SNR
• Name: SN KDP457.540

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 1.822
• Manufacturer: AKSDASIS

• Engine Number to: 211 245
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with tensioner pulley damper, with studs
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC01942

• Engine Number to: 211 215
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Supplementary Article/Info 2: with tensioner pulley damper
• Manufacturer: BOSCH

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 1U6634882
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Manufacturer: GRAF

• Construction Year to: 09.2002
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530009030
• Lisainfo: 530009030
• Additional information: 530009030