Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 04.2002
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle Left,
transmission sided - Length [mm]: 99
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
-
Lisainfo: Bellow Set,
drive shaft -
Additional information: Bellow Set,
drive shaft
-
Fitting Position: Wheel Side,
Front Axle both sides - Height [mm]: 110
- Material: Rubber
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 86
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Wheel Side - Bellows Material: Thermoplast
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 78
- Height [mm]: 114
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 56
- Height [mm]: 99
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8049
- Additional information: D8049
- Lisainfo: D8049
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle Left,
transmission sided - Version: One
- Length [mm]: 106
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 56.5
- Inner Diameter 2 [mm]: 25
- Manufacturer: GSP
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 81
- Height [mm]: 130
- Version: UNIVERSAL BOOT KIT
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8000E
- Additional information: D8000E
- Lisainfo: D8000E
- Fitting Position: Front Axle
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 100
- Manufacturer: 3RG
-
Fitting Position: Wheel Side,
Rear Axle Left, Rear Axle Right - Length [mm]: 79
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 76.5
- Inner Diameter 2 [mm]: 19
- Manufacturer: GSP
-
Fitting Position: Wheel Side,
Front Axle both sides - Height [mm]: 110
- Material: Rubber
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 86
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Wheel Side - Height [mm]: 93
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 78.5
- Inner Diameter 2 [mm]: 24
- Manufacturer: GSP
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Length [mm]: 88
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 88.5
- Inner Diameter 2 [mm]: 24
- Manufacturer: GSP
- Transmission Type: Manual Transmission
-
Vehicle Identification Number (VIN) from: 1U-
3- 768638 - Quantity per axle: 2
- Bellows Material: Thermoplast
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Height [mm]: 102
- Manufacturer: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Identification Number (VIN) from: 1U3768638
- Length [mm]: 98
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 64
- Inner Diameter 2 [mm]: 26
- Manufacturer: GSP
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
-
Vehicle Identification Number (VIN): [8L-
X- 001446;] - Inner Diameter 2 [mm]: 79
- Height [mm]: 100
- Inner Diameter 1 [mm]: 22.5
- Fitting Position: Wheel Side
- Manufacturer: SNR
- Name: SN OBK54.011
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 78
- Height [mm]: 110
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8168T
-
Production date from: 10/
00 -
Production date to: 06/
04 -
Fitting Position: Front Axle,
transmission sided - for OE number: 701498201
- Manufacturer: SASIC
- for OE number: 8N0498203A
- Fitting Position: Wheel Side
- Material: Rubber
- Weight [g]: 126
- Length [mm]: 112
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 95
- Name: IM 37449
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Length [mm]: 123
-
Material: Polychloroprene
(Neoprene) - Inner Diameter 1 [mm]: 87
- Inner Diameter 2 [mm]: 23.5
- Manufacturer: GSP
- Additional information: GSP780115
- Lisainfo: GSP780115
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 21
- Inner Diameter 2 [mm]: 99
- Height [mm]: 90
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8033
- Construction Year from: 03.2003
- Length [mm]: 100
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 67
-
Lisainfo: Axle boot kit,
front, inner -
Additional information: Axle boot kit,
front, inner
Fitting Position: Front Axle Left, Front Axle Right, transmission sided
- Construction Year to: 02.2003
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 99
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 03.2003
-
Fitting Position: transmission sided,
Front Axle - Pikkus (mm): 100
- Siseläbimõõt 1 [mm]: 29
- Siseläbimõõt 2 (mm): 67
- Manufacturer: JPN
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Wheel Side - Length [mm]: 79
- Inner Diameter 1 [mm]: 77
- Inner Diameter 2 [mm]: 19
-
Material: Polychloroprene
(Neoprene) - Manufacturer: JP GROUP
-
Lisainfo: Axle boot kit,
front, outer -
Additional information: Axle boot kit,
front, outer
- Fitting Position: transmission sided
- Height [mm]: 102
- Weight [kg]: 0.049
- Material: Thermoplast
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Manufacturer: METALCAUCHO
- for OE number: 95534990300
- Fitting Position: transmission sided
- Material: Thermoplast
- Weight [g]: 45
- Length [mm]: 102
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
-
Name: IM 37441/
TE - Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Wheel Side,
Rear Axle Left, Rear Axle Right - Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 76
- Height [mm]: 84
- Thread Size: M20x1.5
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Info 2: with nut
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 120
- Weight [kg]: 0.39
- Weight [g]: 390
- Inner Diameter 1 [mm]: 36
- Inner Diameter 2 [mm]: 100
- Manufacturer: METALCAUCHO
- Construction Year to: 02.2003
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 99
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Observe service information:
- Name: SW 30 93 8345
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Wheel Side,
Front Axle Right, Front Axle Left - Inner Diameter 2 [mm]: 77
- Height [mm]: 132
- Name: SN OBK10.001
- Manufacturer: SNR
-
Fitting Position: Wheel Side,
Front Axle - Pikkus (mm): 115
- Siseläbimõõt 1 [mm]: 29
- Siseläbimõõt 2 (mm): 97
- Manufacturer: JPN
- for OE number: 8N0498203A
- Fitting Position: Wheel Side
- Material: Thermoplast
- Weight [g]: 88
- Length [mm]: 112
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 95
-
Name: IM 37449/
TE - Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Front Axle
- General Information: Dust cover for outer joint
- Manufacturer: VIKA
-
Fitting Position: Wheel Side,
Front Axle - Height [mm]: 146
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 86
- Manufacturer: SKF
- Name: SK VKJP01001
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Height [mm]: 102
- Fitting Position: transmission sided
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8501T
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 98
- Height [mm]: 115
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8345T
- Fitting Position: Wheel Side
- Height [mm]: 115
- Weight [kg]: 0.084
- Material: Rubber
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 96
- Manufacturer: METALCAUCHO
- Height [mm]: 102
- Weight [kg]: 0.179
- Material: Thermoplast
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Manufacturer: METALCAUCHO
Fitting Position: transmission sided, Rear Axle both sides, Front Axle both sides
- Fitting Position: Wheel Side
- Weight [kg]: 0.25
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 87
- Length [mm]: 115
- Material: Thermoplast
- General Information: Dust cover for outer joint
- Manufacturer: VIKA
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 98
- Height [mm]: 117
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
- Lisainfo: C306354
- Additional information: C306354
Technical Information: For a professional repair, it is essential to use the appropriate accessories in addition to the appropriate spare part. Please use the list of accessories for this boot to select the correct fastening element prescribed by the manufacturer. Keep in mind that the wrong accessories can also cause joint malfunction! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Height [mm]: 110
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8294T
- Construction Year to: 02.2003
- Transmission Type: Manual Transmission
- Inner Diameter 1 [mm]: 24
- Slim Set:
- Length [mm]: 103
- Height [mm]: 100
- Inner Diameter 2 [mm]: 57
-
Fitting Position: transmission sided,
Front Axle - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 04.2002
-
Fitting Position: transmission sided,
Front Axle Left - Transmission Type: Manual Transmission
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Height [mm]: 98
- Thread Size: M20x1.5
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Info 2: with nut
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Inner Diameter 1 from [mm]: 18
- Inner Diameter 1 to [mm]: 21
- Inner Diameter 2 from [mm]: 66
- Inner Diameter 2 to [mm]: 75
- Height [mm]: 88
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 146
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 86
- Manufacturer: SKF
- Name: SK VKJP01001S
-
Vehicle Identification Number (VIN): [8L-
X- 001446;] - Material: Rubber
- Inner Diameter 1 [mm]: 23
- Height [mm]: 115
- Inner Diameter 2 [mm]: 77
- Fitting Position: Wheel Side
- Name: SN OBK54.021
- Manufacturer: SNR
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 67
- Length [mm]: 100
- Material: Thermoplast
- General Information: Dust cover for inner joint
- Manufacturer: VIKA
- Inner Diameter 1 [mm]: 23.5
- Inner Diameter 2 [mm]: 87
- Height [mm]: 123
- Fitting Position: Wheel Side
- Name: SN OBK54.012
- Manufacturer: SNR
Vehicle Identification Number (VIN): [1Z+7A153 448;], [;1Z-82024 977], [1Z-82024 978;], [;1Z-88008 976], [1Z-88008 977;], [;1Z-8B150 591]
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 30
- Inner Diameter 2 [mm]: 95
- Height [mm]: 120
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8492T
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 74
- Required quantity: 2
- Length [mm]: 105
- Material: Thermoplast
- General Information: Dust cover for inner joint
- Manufacturer: VIKA
- for OE number: 1J0407285A
- Fitting Position: Wheel Side
- Material: Rubber
- Weight [g]: 299
- Clip manufacturer: OETIKER
- Length [mm]: 112
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 95
- Name: IM 33795
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 98
- Height [mm]: 117
- only in connection with: N90587602
- Thread Size: M20x1.5
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Info 2: with nut
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Wheel Side,
Front Axle both sides - Height [mm]: 115
- Weight [kg]: 0.214
- Material: Rubber
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 96
- Manufacturer: METALCAUCHO
-
Fitting Position: Wheel Side,
Rear Axle Left, Rear Axle Right - Inner Diameter 1 from [mm]: 20
- Inner Diameter 1 to [mm]: 24
- Inner Diameter 2 from [mm]: 81
- Inner Diameter 2 to [mm]: 93
- Height [mm]: 110
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: GKN LOBRO
- Additional information: 190975
- Lisainfo: 190975
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Length [mm]: 115
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 97
- Material: Thermoplast
-
Lisainfo: Axle boot kit,
front, outer -
Additional information: Axle boot kit,
front, outer
- Transmission Type: Manual Transmission
-
Fitting Position: Rear Axle,
Wheel Side -
Production date from: 10/
00 -
Production date to: 06/
04 - Material: Thermoplast
- for OE number: 1K0498203B
- Manufacturer: SASIC
- Engine Code: ATD
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 120
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 26.5
- Inner Diameter 2 [mm]: 97.5
- General Information: Rubber as alternative
- Manufacturer: SKF
- Name: SK VKJP3107R
-
Fitting Position: Wheel Side,
Rear Axle Left, Rear Axle Right - Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 75
- Height [mm]: 109
- Thread Size: M20x1.5
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Info 2: with nut
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Rear Axle Left,
Wheel Side, Rear Axle Right - Block Separation:
- Length [mm]: 109
- Material: Thermoplast
- Inner Diameter 1 [mm]: 26
- Weight [kg]: 0.44
- Inner Diameter 2 [mm]: 78
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Wheel Side,
Front Axle both sides - Height [mm]: 125
- Material: Thermoplast
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 86
- Manufacturer: METALCAUCHO
- Transmission Type: Manual Transmission
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 87
- Weight [kg]: 0.25
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 100
- Required quantity: 1
- Length [mm]: 110
- Material: Rubber
- General Information: Dust cover for inner joint
- Manufacturer: VIKA
- Length [mm]: 126
-
Outer Diameter [mm]: 21,
60, 72, 82, 83 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 126
- Weight [kg]: 0.26
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Manufacturer: FEBI
- Lisainfo: 27730 FEBI
- Additional information: 27730 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Wheel Side, Rear Axle Right - Block Separation:
- Length [mm]: 109
- Material: Thermoplast
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 78
- Weight [kg]: 0.44
- Observe service information:
- Name: SW 30 83 0008
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
transmission sided - Inner Diameter 1 from [mm]: 23
- Inner Diameter 1 to [mm]: 30
- Inner Diameter 2 from [mm]: 58
- Inner Diameter 2 to [mm]: 70
- Height [mm]: 98
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 58
- Manufacturer: SKF
- Name: SK VKJP01011
- Transmission Type: Manual Transmission
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 87
- Weight [kg]: 0.25
- Observe service information:
- Name: SW 30 92 9609
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Inner Diameter 1 [mm]: 25,
26 -
Height [mm]: 107,
106 - Inner Diameter 2 [mm]: 90
- Outer Diameter 1 [mm]: 93
-
Thread Size: M20X1,
5 - Fitting Position: Wheel Side
- Name: SN OBK54.028
- Manufacturer: SNR
Vehicle Identification Number (VIN): [1Z+7A153 448;], [;1Z-82024 977], [1Z-82024 978;], [;1Z-88008 976], [1Z-88008 977;], [;1Z-8B150 591]
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle Left, Rear Axle - Block Separation:
- Pikkus (mm): 116
- Siseläbimõõt 1 [mm]: 27
- Siseläbimõõt 2 (mm): 100
- Manufacturer: JPN
-
Fitting Position: Front Axle Left,
transmission sided, Rear Axle - Transmission Type: Manual Transmission
- Block Separation:
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Length [mm]: 115
- Material: Thermoplast
- Supplementary Article/Info 2: with flange
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 772025030
- Transmission Type: Manual Transmission
-
Production date from: 10/
00 -
Production date to: 06/
04 - Fitting Position: transmission sided
- Material: Thermoplast
- for OE number: 1K0498201
- Manufacturer: SASIC
-
Production date from: 10/
00 -
Production date to: 06/
10 - Fitting Position: transmission sided
- Material: Thermoplast
- for OE number: 1K0498201A
- Manufacturer: SASIC
- Model Year from: 2001
- Fitting Position: transmission sided
- Material: PVC
- Manufacturer: FEBEST
- Engine Code: ATD
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 113
- Material: Thermoplast
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 97.2
- Manufacturer: SKF
- Name: SK VKJP3107
- Transmission Type: Manual Transmission
-
Fitting Position: Front Axle,
Wheel Side - Slim Set:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Height [mm]: 110
- Bellows Material: Thermoplast
- Full Set:
- Manufacturer: TOPRAN
Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Wheel Side - Inner Diameter 1 from [mm]: 20
- Inner Diameter 1 to [mm]: 27
- Inner Diameter 2 from [mm]: 78
- Inner Diameter 2 to [mm]: 90
- Height [mm]: 116
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 20
- Inner Diameter 2 [mm]: 78
- Name: SK VKJP01018
- Manufacturer: SKF
- Construction Year to: 04.2002
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle Left - Height [mm]: 98
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 57
- Manufacturer: SKF
- Name: SK VKJP6012
-
Vehicle Identification Number (VIN) to: 1U-
3- 790 086 - Engine Code: ATD
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 114
- Inner Diameter 1 [mm]: 18
- Inner Diameter 2 [mm]: 100
- Manufacturer: SKF
- Name: SK VKJP8010
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Supplementary Article/Supplementary Info: with grease
-
Supplementary Article/Info 2: with clamps,
with screw - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 97
- Weight [kg]: 0.43
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Length [mm]: 88
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 89
-
Supplementary Article/Info 2: with clamps,
with retaining ring, with nut -
Thread Size: M20 x 1,
5 -
Material: Polychloroprene
(Neoprene) - Manufacturer: METZGER
-
Fitting Position: Front Axle,
transmission sided - Construction Year from: 03.2003
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Length [mm]: 102
- Material: Thermoplast
- SVHC: No SVHC present!
- Name: LU 772044530
- Manufacturer: FAG
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle Left, Rear Axle - Block Separation:
- Length [mm]: 116
- Material: Rubber
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Weight [kg]: 0.127
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 02.2003
- Transmission Type: Manual Transmission
- Length [mm]: 115
- Height [mm]: 83
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 80
- Full Set:
-
Fitting Position: transmission sided,
Front Axle - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Supplementary Article/Supplementary Info: with grease
-
Supplementary Article/Info 2: with clamps,
with nut - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 97
- Weight [kg]: 0.29
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Supplementary Article/Supplementary Info: with grease
-
Supplementary Article/Info 2: with clamps,
with screw - Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 97
- Weight [kg]: 0.43
- Name: SW 30 94 9070
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 03.2003
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 100
- Material: Thermoplast
- Inner Diameter 1 [mm]: 29
- Weight [kg]: 0.179
- Inner Diameter 2 [mm]: 67
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 03.2003
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 100
- Material: Thermoplast
- Inner Diameter 1 [mm]: 29
- Inner Diameter 2 [mm]: 67
- Weight [kg]: 0.179
- Observe service information:
- Name: SW 30 93 8349
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: Manual Transmission
-
Fitting Position: transmission sided,
Front Axle Left, Rear Axle - Block Separation:
- Length [mm]: 116
- Material: Rubber
- Inner Diameter 1 [mm]: 27
- Inner Diameter 2 [mm]: 100
- Observe service information:
- Name: SW 30 93 8365
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 1U-
3- 790 087 - Engine Code: ATD
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 102
- Material: Thermoplast
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Manufacturer: SKF
- Name: SK VKJP8356
- Model Year from: 2001
- Fitting Position: transmission sided
- Length [mm]: 102
- Material: PVC
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 68
- Manufacturer: FEBEST
-
Fitting Position: Wheel Side,
Front Axle - Length [mm]: 115
- Material: Thermoplast
- Supplementary Article/Supplementary Info: with grease
-
Supplementary Article/Info 2: with clamps,
with nut - Inner Diameter 1 [mm]: 29
- Weight [kg]: 0.29
- Inner Diameter 2 [mm]: 97
- Observe service information:
- Name: SW 30 93 0142
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: 1U3768638
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 67
- Height [mm]: 102
- Supplementary Article/Info 2: with top
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 10.4
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 94
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Length [mm]: 113
- Material: Thermoplast
-
Fitting Position: Front Axle,
Wheel Side - Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 88
- Weight [kg]: 0.25
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Wheel Side, Front Axle - Inner Diameter 1 [mm]: 26
- Slim Set:
- Height [mm]: 108
- Inner Diameter 2 [mm]: 78
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Outer Diameter [mm]: 27,
75, 92, 100, 108, 116 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 151
- Weight [kg]: 0.23
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Wheel Side
- Length [mm]: 118
- Material: PVC
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 30
- Inner Diameter 2 [mm]: 95
- Manufacturer: FEBEST
- Model Year from: 2001
- Fitting Position: Wheel Side
- Length [mm]: 107
- Material: PVC
- Joint Type: CV Joint
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 80
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 1U-
3- 790 087 - Engine Code: ATD
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 99
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 63
- General Information: Rubber as alternative
- Manufacturer: SKF
- Transmission Type: Manual Transmission
- Model Year from: 2001
-
for combined PR number: G0G,
G0L - Fitting Position: Front Axle
- Length [mm]: 43
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 100
- Manufacturer: FEBEST
- Inner Diameter 2 [mm]: 77
- Height [mm]: 132
- Quantity: 12
-
Fitting Position: Wheel Side,
Front Axle Right, Front Axle Left - Name: SN OBK10.003
- Manufacturer: SNR
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks