• Fitting Position: Front Axle, Rear Axle
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind , VW/Audi
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind , VW/Audi

• Fitting Position: Rear Axle
• Length [mm]: 140
• Thread Size: M10x1
• Manufacturer: JP GROUP A/S
• Lisainfo: Brake hose, rear
• Additional information: Brake hose, rear

Lisainfo: Brake hose, front w/o accessories

Lisainfo: Brake hose, front

• Fitting Position: Front Axle
• Length [mm]: 560
• Thread Size: M10x1
• Supplementary Article/Supplementary Info: with banjo fitting
• Manufacturer: JP GROUP
• Lisainfo: Brake Hose
• Additional information: Brake Hose

• Fitting Position: Front, Rear
• Length [mm]: 25
• Width [mm]: 24
• Material: Metal
• Manufacturer: DELLO AUTOMEGA
• Additional information: 120014510 DELLO
• Lisainfo: 120014510 DELLO

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Quantity per packing unit: 10
• Material: Spring Steel
• for OE number: 191 611 715
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front and Rear
• Material: Metal
• Weight [kg]: 0.008
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: FEB
• Quantity per packing unit: 4

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 10
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Length [mm]: 166
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle, inner
• Length [mm]: 168
• Thread Size 1: INN M10x 1.0
• Thread Size 2: INN. M10x1
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, inner
• Length [mm]: 168
• Thread Size 1: INN M10x1.0
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.06
• Manufacturer: ABS

• Fitting Position: Rear
• General Information: Brake hose; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle, inner
• Length [mm]: 166
• Net weight [kg]: 0.06
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Rear Axle Left, Rear Axle Right, inner
• Thread Size: M 10 x1,0
• Internal Thread 1 [mm]: M 10 x 1,0
• Length [mm]: 140
• Internal Thread 2 [mm]: M 10 x 1,0
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 545
• Internal Thread [mm]: M10x1
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle, inner, Left, Right
• Length [mm]: 170
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 027

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Internal Thread 2 [mm]: M 10x1
• Length [mm]: 140
• Spanner Size: 15/15
• Internal Thread 1 [mm]: M 10x1
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, inner
• Length [mm]: 148
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BREAK PRZEWODY H-CA

• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, inner
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1 Int SF
• Length [mm]: 143
• Name: PIDURIVOOLIK
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
IBIZA V (6J5), 03.08
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
IBIZA V (6J5), 03.08
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length [mm]: 580
• Thread Size 1: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Length [mm]: 140
• Manufacturer: CORTECO
• Name: COB 19025904

• Fitting Position: Rear Axle
• Length [mm]: 166
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, inner, Rear Axle Right
• Braking System: for vehicles with disc brakes on the rear axle
• Block Separation:
• Length [mm]: 165
• Weight [kg]: 0.09
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 450
• General Information: Brake hose; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle, inner
• Overall Length [mm]: 168
• Thread Size 1: F10x1
• Thread Size 2: F10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRI

• for OE number: 1J0 611 701
• Length [mm]: 435
• Fitting Position: Front Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear
• General Information: brake hose; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle, inner, Left, Right
• Length [mm]: 168
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Supplementary Article/Supplementary Info: without pipe
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, inner
• Length [mm]: 140
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Length [mm]: 570
• Internal Thread [mm]: M10x1
• Connector type: Banjo fitting
• Required quantity: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with banjo bolt
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Left, Right, Front Axle
• Braking/Driving Dynamics: for vehicles without ABS
• Length [mm]: 455
• Thread Size 1: F10X1
• Thread Size 2: 10
• Manufacturer: BREMBO
• Name: BR T 85 028

• Fitting Position: Front Axle, Left, Right
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Length [mm]: 580
• Net weight [kg]: 0.09
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Front Axle
• Length [mm]: 468
• Manufacturer: CORTECO
• Name: COB 19026392

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 165
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• MAPP code available:
• Manufacturer: ATE

Name: PRZEWàD HAM. ELAST. VW T. BORA/GOLF/LUPO/POLO 99- LE/PR

• Fitting Position: Front Axle
• Length [mm]: 580
• Thread Size 1: BANJO 10.0 mm
• Thread Size 2: INN M10x1.0
• Weight [kg]: 0.16
• Manufacturer: ABS

• Fitting Position: Front Axle Left, Front Axle Right
• Internal Thread [mm]: M 10 x 1,0
• Connector type: Banjo
• Length [mm]: 569
• Observe system fill quantity:
• Manufacturer: TOPRAN

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 580
• Thread Size 1: BANJO 10.0 mm
• Thread Size 2: INN. M10x1
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Left, Right
• Length [mm]: 450
• Thread Size 1: M10x1
• Thread Type: with internal thread
• Thread Size 2: Banjo
• Diameter 1 [mm]: 10
• Diameter 2 [mm]: 10.15
• Name: PIDURIVOOLIK
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Left Rear
• General Information: Brake hose; rear left
• Manufacturer: VIKA

• Fitting Position: Right Rear
• General Information: Brake hose; rear right
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Overall Length [mm]: 592
• Thread Size 1: F10x1
• Thread Size 2: Banjo
• Name: PIDURIVOOLIK
• Manufacturer: TRI

• Fitting Position: Rear Axle Right, outer
• Length [mm]: 820
• Thread Size 1: M10x1
• Thread Size 2: M12x1
• Thread Type: with external thread
• Supplementary Article/Info 2: with banjo bolt, with washers
• Supplementary Article/Supplementary Info: with pipe
• Name: Pidurivoolik
• Manufacturer: QBK
• Additional information: 96.012X QB
• Lisainfo: 96.012X QB

• Fitting Position: Front Axle Left
• Length [mm]: 570
• Thread Size 1: M10x1
• Thread Type: with internal thread, with external thread
• Thread Size 2: M10x1,5
• Supplementary Article/Info 2: with banjo bolt, with washers
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Length [mm]: 567
• Internal Thread 1 [mm]: M10x1
• Manufacturer: BOSCH

• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Length [mm]: 570
• Internal Thread [mm]: M10x1
• Connector type: Banjo fitting
• Required quantity: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with banjo bolt
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, outer
• Length [mm]: 820
• Thread Size 1: M10x1
• Thread Size 2: M12x1
• Thread Type: with external thread
• Supplementary Article/Info 2: with banjo bolt, with washers
• Supplementary Article/Supplementary Info: with pipe
• Name: Pidurivoolik
• Manufacturer: QBK

• Fitting Position: Front Axle, Left, Right
• Length [mm]: 580
• Thread Size 1: M10x1
• Thread Size 2: M10x1,5
• Thread Type: with internal thread
• Manufacturer: TRW
• Quality class: Q
• Name: Brake hose

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Left, Right, Front Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 580
• Thread Size 1: 10
• Thread Size 2: F10X1
• Manufacturer: BREMBO

• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 563
• Internal Thread Size: M10 x 1
• Spanner Size: 17
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.12
• Supplementary Article/Info 2: with banjo bolt
• Observe service information:
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 569
• Supplementary Article/Info 2: with banjo bolt
• Thread Size: M10x1,5
• Internal Thread [mm]: M10x1
• MAPP code available:
• Spanner Size 1 [mm]: 11
• Spanner Size 2 [mm]: 17
• Name: Pidurivoolik
• Manufacturer: ATE

• paired article number: 171041
• Spanner Size: 12
• Fitting Position: Rear Axle Right
• Observe service information:
• Name: Pidurivoolik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174540
• Length [mm]: 800
• External Thread Size: M10 x 1
• Thread Length [mm]: 11.5
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.18
• Observe service information:
• Name: Pidurivoolik
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, outer
• paired article number: 8547127
• Length [mm]: 800
• Net weight [kg]: 0.22
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Rear Axle Right, outer
• paired article number: 8547126
• Length [mm]: 800
• Net weight [kg]: 0.21
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Rear Axle Right, outer
• Length [mm]: 800
• Thread Size 1: OUT M10x1.0
• Thread Size 2: BANJO 12.0 mm
• paired article number: SL 6165
• Weight [kg]: 0.22
• Manufacturer: ABS

• Fitting Position: Rear Axle Left, at brake caliper
• Length [mm]: 830
• External Thread [mm]: M10 x 1
• Connector type: Banjo
• Diameter [mm]: 12
• Supplementary Article/Supplementary Info: with pipe
• Supplementary Article/Info 2: with banjo bolt
• paired article number: 4119367
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right, outer
• Thread Size 1: M10x1
• Length [mm]: 155
• Thread Type: with external thread
• Supplementary Article/Supplementary Info: with pipe
• Name: PIDURIVOOLIK
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, outer
• Thread Size 1: M10x1
• Length [mm]: 155
• Thread Type: with external thread
• Supplementary Article/Supplementary Info: with pipe
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: outer, Rear Axle Right
• Braking/Driving Dynamics: for vehicles with ABS
• Length [mm]: 805
• Thread Size 1: M10X1
• Thread Size 2: banjo
• Manufacturer: BREMBO