• Engine Code: APK, AQY, AZH
• Construction Year from: 08.2000
• Construction Year to: 09.2004
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 510
• Oxygen Sensor: Planar Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 620
• Oxygen Sensor: Heated
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 480
• Oxygen Sensor: Planar Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Construction Year from: 11.2002
• Engine Code: AEG
• Exhaust System: for pre-catalytic converter
• for OE number: 06A906262AK, 023906262
• Thread Size: M18x1.5
• Cable Length [mm]: 1,250
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 160
• Gross Weight [g]: 193
• Name: DN DOX-2012
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Installatsiooni pool: pärast katalüsaatorit
• Seerianumber: ESL-AU-007
• Manufacturer: NTY
• Name: NTY ESL-AU-007

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Overall Length [mm]: 1,000
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: after catalytic converter
• Number of pins: 4
• Rated Voltage [V]: 12
• Oxygen Sensor: Planar Sensor, Heated
• Connector Shape: D Shape
• Cable Length [mm]: 730
• Overall Length [mm]: 757
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN HANS PRIES

Supplementary Article/Info 2: with plastic socket, with heat shield pipe, with mounting manual General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Engine Code: AQY, APK
• Construction Year from: 08.2000
• Length [mm]: 550
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Planar Sensor
• Guarantee: 5 years guarantee
• Overall Length [mm]: 750
• Number of circuits: 4
• General Information: Sold in Hueco brand: printing and packaging
• Name: HU 135332
• Manufacturer: HITACHI

• Engine Code: AZJ
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 08.2000
• Construction Year to: 01.2005
• Pinge [V]: 12
• Pikkus (mm): 1 175
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV038

• Fitting Position: Front, after catalytic converter
• Engine Code: AQY/APK
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 04.2000
• Construction Year to: 07.2000
• Engine Code: AZH
• Cable Length [mm]: 909
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Construction Year from: 05.2001
• Construction Year to: 10.2002
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Vehicle Identification Number (VIN) to: 1U-3-724 128, 1U-38-683 064, 1U-3A-009 066
• Engine Code: AZJ
• Cable Length [mm]: 1,530
• Manufacturer: DELPHI
• Name: DE ES20166-12B1

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 250 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 1 720
• Üldine informatsioon: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Construction Year from: 08.2000
• Construction Year to: 01.2006
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 760
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV694

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Engine Code: AQY, APK
• Cable Length [mm]: 700
• Manufacturer: DELPHI
• Name: DE ES20168-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Oxygen Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• for OE number: 06A906262AS
• Manufacturer: MEAT&DORIA

• Lambda andur: soojendatud
• Pins'ide arv: 4
• Kogupikkus [mm]: 780
• Manufacturer: ERA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 1 750
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Engine Code: AZJ, AQY
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 580
• Weight [kg]: 0.097
• for OE number: 06A 906 262 AH
• Name: SW 33 10 3202
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 760
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570030
• Manufacturer: ERA

• Installatsiooni pool: ees, ees paremal, pärast katalüsaatorit
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-AU-004
• Manufacturer: NTY
• Name: NTY ESL-AU-004

• Construction Year from: 08.2000
• Construction Year to: 01.2006
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 650
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,15
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV706

• Engine Code: APK, AQY
• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Construction Year from: 08.2000
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 980
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,17
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 470
• Üldine informatsioon: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Construction Year from: 03.2002
• Construction Year to: 01.2006
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Engine Code: AZJ
• Cable Length [mm]: 740
• Manufacturer: DELPHI
• Name: DE ES20348-12B1

• Construction Year from: 11.2002
• Construction Year to: 01.2005
• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 1 670
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,21
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV624
• Manufacturer: ESEN SKV

• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 5
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 330
• Üldine informatsioon: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Engine Code: AQY, APK, AZH, AEG
• Construction Year from: 08.2000
• Construction Year to: 09.2004, 01.2005
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

Fitting Position: after catalytic converter, before catalytic converter

• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 954
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Engine Code: AZJ
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Length [mm]: 1,700
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Catalytic Converter Type: for vehicles with catalytic converter
• Cable Length [mm]: 1,700
• Number of pins: 4
• Number of circuits: 4
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AQY, APK, AEG
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 05.1999
• Engine Code: APK,AQY
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 4
• Connector Shape: D Shape
• Cable Length [mm]: 225
• Thread Size: M18 x 1,5
• Length [mm]: 350
• Number of pins: 4
• Version: ZR-PLANAR
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZJ
• Construction Year from: 03.2002
• Construction Year to: 01.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Resistor [Ohm]: 9
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 505
• Cable Length [mm]: 505
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: AEG, AQY, APK
• Cable Length [mm]: 1,200
• Name: DE ES20338-12B1
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Construction Year from: 11.1999
• Construction Year to: 07.2004
• Engine Code: AZH
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: APK, AZH, AQY, AZJ, ATF
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZH/AZJ
• Construction Year from: 08.2000
• Construction Year to: 01.2006
• Number of pins: 5
• Overall Length [mm]: 1,510
• Oxygen Sensor: Regulating Sensor
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AQY, AZJ, APK
• Fitting Position: before soot particulate filter
• Oxygen Sensor: Heated
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.2000
• Construction Year to: 09.2004
• Engine Code: AEG/APK/AQY
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,100
• Number of pins: 4
• Number of circuits: 4
• Connector Shape: D Shape
• Socket colour: black
• for OE number: 06F 906 262 D
• Cable Length [mm]: 925
• Thread Size: M18 x 1,5
• Housing Colour: black
• Version: ZR-PLANAR
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 05.1999
• Engine Code: APK,AQY
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: brown
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Length [mm]: 570
• for OE number: 06A 906 262 F
• Cable Length [mm]: 570
• Number of pins: 4
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AZH
• for OE number: 06A906262AJ, 022906262BG
• Thread Size: M18x1.5
• Cable Length [mm]: 650
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 189
• Gross Weight [g]: 222
• Manufacturer: DENSO
• Name: DN DOX-2000
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"

• Engine Code: AQY, APK
• for OE number: 06A906262F, 022906262F
• Thread Size: M18x1.5
• Cable Length [mm]: 500
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 125
• Gross Weight [g]: 158
• Manufacturer: DENSO
• Name: DN DOX-2015

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
POLO CLASSIC (6KV2),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO CLASSIC (6KV2),
(kvaliteediklass: Q)"

• Engine Code: AQY, AZJ, AEG, APK
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AQY, APK
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 1,100
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 06A906262Q
• Quality: OE
• Weight [g]: 117
• Gross Weight [g]: 150
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Engine Code: AZJ, AZH
• Construction Year from: 08.2000
• Construction Year to: 01.2006
• Length [mm]: 1,500
• Number of pins: 6
• for article number: 77030
• Manufacturer: FAE

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Engine Code: AEG
• Construction Year to: 01.2005
• Length [mm]: 1,100
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AQY, APK, AEG
• Construction Year from: 08.2000
• Construction Year to: 01.2005
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Engine Code: AZJ
• Construction Year from: 03.2002
• Construction Year to: 01.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Sensor, Planar Sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: AEG, APK, AQY
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066401
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 08.2000
• Construction Year to: 09.2004
• Engine Code: AEG/APK/AQY
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Length [mm]: 1,110
• for OE number: 06A 906 262 Q
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,020
• Number of circuits: 4
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• for article number: 77032
• Manufacturer: FAE

• Construction Year from: 11.1999
• Construction Year to: 01.2006
• Engine Code: ATF,AZH,AZJ
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.18
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: AEG, APK, AQY
• Oxygen Sensor: Regulating Sensor
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AQY, APK, AZH
• Construction Year from: 08.2000
• Construction Year to: 09.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 05.1999
• Engine Code: APK,AQY
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.17
• Name: VA 368041
• Manufacturer: VALEO

• Construction Year from: 08.2000
• Construction Year to: 09.2004
• Engine Code: AZJ, AQY, APK
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Pikkus (mm): 500
• Ülekandeliinide arv: 4
• Manufacturer: VDO

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 1,510
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 1,510
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM150

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 750
• Üldine informatsioon: Lambda sensor
• Manufacturer: BORSEHUNG

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905