• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Name: GH 394710
• Manufacturer: AUTO-GH

• Engine Code: AQY, AZJ, AEG, APK
• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 61
• Outer Diameter [mm]: 79.5
• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Width [mm]: 21
• Name: PIER—CIEã CZUJNIKA ABS VW
• Manufacturer: VMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: for wheel bearing/wheel hub
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: METZGER

• Outer Diameter [mm]: 74
• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-009
• Manufacturer: NTY
• Name: NTY KLP-VW-009

• Fitting Position: Front Axle Left, Front Axle Right
• Width [mm]: 40
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Number of Parts [parts]: 6
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-03-002
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: KLP-MZ-012
• Rim Size [inch]: 18.0
• Manufacturer: NTY

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Quality class: PJ
• Name: Wheel bearing kit

• Engine Code: AZJ
• Fitting Position: Rear Axle, Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1
• Number of Holes: 4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 39.6
• Outer Diameter [mm]: 74
• Net weight [kg]: 0.77
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK
• Lisainfo: .
• Additional information: .

• Fitting Position: Front Axle Left, Front Axle Right
• Version: Two
• Width 1 [mm]: 40
• Outer Diameter 1 [mm]: 74
• Inner Diameter 1 [mm]: 40
• Manufacturer: GSP

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without integrated ABS sensor
• Width [mm]: 40
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Manufacturer: FAI

• Engine Code: AQY, AEG, APK
• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Weight [kg]: 0.637
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Width [mm]: 40
• Supplementary Article/Info 2: with nut, with retaining ring
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter 1 [mm]: 74
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Height [mm]: 39.9
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Width 1 [mm]: 40
• Outer Diameter 1 [mm]: 74
• Inner Diameter 1 [mm]: 40
• Manufacturer: GSP

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-004
• Manufacturer: NTY
• Name: NTY KLT-VW-004

• Fitting Position: Front Axle
• for OE number: 1J0 498 625
• Width [mm]: 40
• Outer Diameter [mm]: 74
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Bearing Type: Angular Ball Bearing
• Weight [kg]: 0.768
• Supplementary Article/Info 2: with retaining ring
• Supplementary Article/Supplementary Info: with axle nut
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Front Axle
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Bearing Type: Angular Ball Bearing
• Weight [kg]: 0.768
• Supplementary Article/Supplementary Info: with axle nut
• Supplementary Article/Info 2: with retaining ring
• Name: SW 30 91 4250
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Height [mm]: 39.9
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.52
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV439

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Width [mm]: 40
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 0.79
• Packaging length [cm]: 11
• Packaging width [cm]: 9
• Packaging height [cm]: 9
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Width [mm]: 40
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Quantity: 1, 2
• Fitting Position: Front
• General Information: Wheel bearing; front; with repair kit
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 120
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 40
• Outer Diameter 1 [mm]: 74
• Width 1 [mm]: 40
• Rim Hole Number: 3
• Weight [kg]: 0.8
• Manufacturer: ABS

• Fitting Position: Front Axle both sides
• Rotation angle [°]: 60
• Diameter [mm]: 74
• Width [mm]: 40
• Weight [kg]: 0.71
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Tightening Torque [Nm]: 200, 60
• Weight [g]: 820
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 74
• Inner Diameter [mm]: 40
• Width [mm]: 40
• Manufacturer: METZGER

• Engine Code: AEG
• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Name: CFD 110212
• Manufacturer: DACO

• Construction Year from: 08.2000
• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Supplementary Article/Info 2: without wheel hub
• Manufacturer: FEBEST

• Construction Year from: 09.1999
• Construction Year to: 06.2004
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Braking/Driving Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 1.75
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 100
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV001
• Manufacturer: ESEN SKV

• Rotation angle [°]: 60
• Tightening Torque [Nm]: 60, 200
• Fitting Position: Front Axle Right, Front Axle Left
• Name: SN R157.22
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 29.98
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Width [mm]: 61.8
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Number of Teeth, ABS ring: 43
• Net weight [kg]: 1.72
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Flange Diameter [mm]: 120
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 29.98
• Manufacturer: GSP

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 40
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 74
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Construction Year from: 08.2000
• Fitting Position: Front Axle
• Outer Diameter [mm]: 74
• Supplementary Article/Info 2: without wheel hub
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Width [mm]: 63.5
• Number of Teeth, ABS ring: 43
• Inner Diameter [mm]: 30
• Outer Diameter 2 [mm]: 120
• Number of mounting bores: 5
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front
• General Information: Wheel bearing; front; without bolt
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle both sides
• Quantity per axle: 2
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with ABS sensor ring, Wheel Bearing integrated into wheel hub General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Fitting Position: Rear Axle
• Number of Holes: 5
• Weight [kg]: 2
• Required quantity: 2
• Bolt Hole Circle Ø [mm]: 100
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bearing Type: Rolling Bearing
• General Information: Wheel bearing assembly; rear
• Manufacturer: VIKA

• Engine Code: AQY, AZJ, AEG, APK
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 5
• Bearing Type: Rolling Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Equipment Line/Variant: REAR LR+RE
• for OE number: 1J0598477
• Diameter [mm]: 120
• Inner Diameter [mm]: 30
• Width 1 [mm]: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1013
• Manufacturer: DAYCO

• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 5
• Bearing Type: Rolling Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.506
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AQY, AZJ, AEG, APK
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 5
• Bearing Type: Rolling Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 32 92 4236
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• General Information: Wheel bearing
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Width [mm]: 61.8
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 30
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Teeth, ABS ring: 43
• Rim Hole Number: 5
• Number of Teeth: 43
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 5
• Bearing Type: Rolling Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.506
• Name: SW 99 90 9521
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 30
• Outer Diameter 1 [mm]: 120
• Height 1 [mm]: 64
• Rim Hole Number: 5
• Weight [kg]: 2.68
• Number of Teeth, ABS ring: 43
• Thread Size: M14 x 1.5
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: ABS

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Fitting Position: Front Axle, Front Axle Right
• Outer Diameter [mm]: 74
• Number of pins: 2
• Braking/Driving Dynamics: for vehicles with ABS
• Required quantity: 1
• Width [mm]: 40
• Supplementary Article/Info 2: with RPM sensor
• Inner Diameter [mm]: 40
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1J0 501 477 A
• Fitting Position: Rear Axle both sides
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: TRUCKTEC

• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of Teeth: 43
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: SNR /NTN-SNR/
• Name: SN R157.20

• Fitting Position: Rear Axle
• Required quantity: 2
• Flange Diameter [mm]: 120
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 100
• Number of Holes: 5
• Weight [kg]: 1.506
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Required quantity: 2
• Width [mm]: 63
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 120
• Bearing Type: Rolling Bearing
• General Information: Wheel bearing assembly; rear
• Manufacturer: BORSEHUNG

• Required quantity: 2
• Engine Code: AQY
• Supplementary Article/Info 2: with ABS sensor ring, with wheel hub
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 30
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 1.74
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 120
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 120
• Inner Diameter [mm]: 30
• Width [mm]: 61.5
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear
• Supplementary Article/Info 2: with bolts
• General Information: Wheel bearing assembly; rear; with screws
• Manufacturer: BORSEHUNG