Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 74
- Inner Diameter [mm]: 40
- Width [mm]: 40
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
- Fitting Position: Front Axle
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Height [mm]: 39.9
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Supplementary Article/Info 2: with integrated wheel bearing
- Rim Hole Number: 5
-
Lisainfo: Wheel hub with bearing,
rear -
Additional information: Wheel hub with bearing,
rear
- Fitting Position: Rear Axle
- Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 61
- Outer Diameter [mm]: 79.5
-
Supplementary Article/Info 2: for wheel bearing/
wheel hub - Width [mm]: 21
- Weight [kg]: 0.039
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: without wheel hub
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
VW- 009 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 009
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle both sides
- Outer Diameter [mm]: 74
- Inner Diameter [mm]: 40
- Width [mm]: 40
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle both sides
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Rear Axle,
Front Axle - Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Number of Holes: 4
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fabrication Number: KLP-
MZ- 012 - Rim Size [inch]: 18.0
- Manufacturer: NTY
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Engine Code: AQY,
AEG, APK - Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Bearing Type: Angular Ball Bearing
- Weight [kg]: 0.637
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Outer Diameter [mm]: 74
- Inner Diameter [mm]: 40
- Width [mm]: 40
-
Supplementary Article/Info 2: with nut,
with retaining ring - Full Set:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 39.6
- Outer Diameter [mm]: 74
- Net weight [kg]: 0.77
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Lisainfo: .
- Additional information: .
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Front Axle
- Required quantity: 2
- Parameter: DP2010.10.0086
- Manufacturer: DRIVE
- Fitting Position: Front Axle
- Width [mm]: 40
- Outer Diameter [mm]: 74
- for OE number: 1J0 498 625
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Alternative Repair Kit: 100 498 0048
- Fitting Position: Front Axle
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Height [mm]: 39.9
- Bearing Type: Ball Bearing
- Name: RATTALAAGER
- Manufacturer: MEY
- Lisainfo: 1004070048
- Additional information: 1004070048
- Supplementary Article/Info 2: with wheel hub
-
Fitting Position: Rear Axle,
Rear Axle Left, Rear Axle Right -
Fabrication Number: KLT-
VW- 004 - Manufacturer: NTY
-
Name: NTY KLT-
VW- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 0.768
- Supplementary Article/Supplementary Info: with axle nut
- Supplementary Article/Info 2: with retaining ring
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
-
Fitting Position: Front Axle Left,
Front Axle Right - Trim Level: FRONT LR+FR
- for OE number: 1J0498625A
- Diameter [mm]: 74
- Number of bores: 40
- Width [mm]: 40
- Diameter 2 [mm]: 1
- Name: DA KWD1012
- Manufacturer: DAYCO
- Fitting Position: Front Axle
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 0.768
- Supplementary Article/Info 2: with retaining ring
- Supplementary Article/Supplementary Info: with axle nut
- Name: SW 30 91 4250
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front and Rear
- Weight [kg]: 1.52
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: with attachment material
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Height [mm]: 39.9
- Bearing Type: Ball Bearing
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Width [mm]: 40
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
-
Quantity: 1,
2 - Fitting Position: Front
- General Information: wheel bearing with assembly parts; front
- Manufacturer: VIKA
- Supplementary Article/Info 2: with nut
- Outer Diameter [mm]: 74
- Inner Diameter [mm]: 40
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 40
- Outer Diameter 1 [mm]: 74
- Inner Diameter 1 [mm]: 40
- Version: One
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Width [mm]: 61.8
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Number of Teeth, ABS ring: 43
- Net weight [kg]: 1.72
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 120
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Outer Diameter [mm]: 120
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Construction Year from: 09.1999
- Construction Year to: 06.2004
- Fitting Position: Rear
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Braking/Drive Dynamics: for vehicles with ABS
- Weight [kg]: 1.75
- Number of Holes: 5
- Bolt Hole Circle Ø 1 [mm]: 100
- Warranty: 4 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV001
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.662
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 7.4
- Packaging width [cm]: 7.4
- Packaging height [cm]: 4
- Manufacturer: FEBEST
-
Fitting Position: Right,
Left, Front Axle - Rotation angle [°]: 60
-
Tightening Torque [Nm]: 60,
200 - Manufacturer: SNR
- Name: SN R157.22
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 5
-
Thread Size: M14X1,
5 - Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Inner Diameter 2 [mm]: 30
- Manufacturer: GSP
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 74
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Quantity per axle: 2
- Manufacturer: TOPRAN
Supplementary Article/Info 2: with ABS sensor ring, Wheel Bearing integrated into wheel hub, with grease cap, with nut General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle both sides
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Quantity per axle: 2
- Manufacturer: TOPRAN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 5
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 29.98
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Flange Ø [mm]: 120
- Supplementary Article/Info 2: with ABS sensor ring
- Quality class: PJ
- Name: Wheel hub
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Rim Hole Number: 5
-
Thread Size: M14X1,
5 - Number of Teeth, ABS ring: 43
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Supplementary Article/Info 2: with ABS sensor ring
- Inner Diameter 2 [mm]: 29.98
- Version: One
- Manufacturer: GSP
- Fitting Position: Rear Axle
- Required quantity: 2
- Parameter: DP2010.10.0107
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: DRIVE
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2
- Supplementary Article/Supplementary Info: with attachment material
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 30
- Outer Diameter 1 [mm]: 120
- Height 1 [mm]: 64
- Rim Hole Number: 5
- Weight [kg]: 2.68
- Number of Teeth, ABS ring: 43
- Thread Size: M14 x 1.5
- Bolt Hole Circle Ø [mm]: 100
- Manufacturer: A.B.S.
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring
- Fitting Position: Front Axle
- Weight [kg]: 0.927
- Outer Diameter [mm]: 74
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.5
- Packaging width [cm]: 7.4
- Packaging height [cm]: 7.4
- Manufacturer: FEBEST
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.506
- Name: SW 99 90 9521
- Manufacturer: SWAG
- Lisainfo: 99 90 9521 SWA
- Additional information: 99 90 9521 SWA
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 1.506
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FEB
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 63
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 5
- Bearing Type: Rolling Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 2
- Supplementary Article/Supplementary Info: with attachment material
- Name: SW 32 92 4236
- Manufacturer: SWAG
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front Axle Left - Supplementary Article/Info 2: with wheel speed sensor
- Quantity Unit: Set
- Number of pins: 2
- Braking/Drive Dynamics: for vehicles with ABS
- Outer Diameter [mm]: 74
- Required quantity: 1
- Width [mm]: 40
- Inner Diameter [mm]: 40
- Weight [kg]: 0.881
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Width [mm]: 61.8
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with attachment material
- Inner Diameter 1 [mm]: 30
- Outer Diameter [mm]: 120
- Bolt Hole Circle Ø [mm]: 100
- Number of Teeth, ABS ring: 43
- Rim Hole Number: 5
- Number of Teeth: 43
- Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
-
Fitting Position: Front Axle,
Front Axle Right - Outer Diameter [mm]: 74
- Quantity Unit: Set
- Number of pins: 2
- Braking/Drive Dynamics: for vehicles with ABS
- Required quantity: 1
- Weight [kg]: 0.837
- Width [mm]: 40
- Supplementary Article/Info 2: with wheel speed sensor
- Inner Diameter [mm]: 40
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1J0 501 477 A
- Fitting Position: Rear Axle both sides
- Supplementary Article/Info 2: with ABS sensor ring
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Trim Level: REAR LR+RE
- for OE number: 1J0598477
- Diameter [mm]: 120
- Number of bores: 30
- Width [mm]: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Diameter 2 [mm]: 1
- Name: DA KWD1013
- Manufacturer: DAYCO
- Quantity: 2
- Bearing Type: Rolling Bearing
- Fitting Position: Rear Axle
- Width [mm]: 63
- Weight [kg]: 2
- Required quantity: 2
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- General Information: wheel hub with bearing; rear
- Manufacturer: VIKA
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 30
- Outer Diameter [mm]: 120
- Supplementary Article/Info 2: with integrated ABS sensor
- Width [mm]: 64
- Manufacturer: IJS GROUP
- Fitting Position: Left
- General Information: repair kit for wheel bearing
- Manufacturer: BORSEHUNG
- Required quantity: 2
-
Engine Code: APK,
AZH, AQY -
Supplementary Article/Info 2: with ABS sensor ring,
with wheel hub - Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Required quantity: 2
- Flange Ø [mm]: 120
- Rim Hole Number: 5
- Supplementary Article/Info 2: with ABS sensor ring
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Rim Hole Number: 5
-
Mounting Type: Press-
fitted - Inner Diameter [mm]: 30
- Number of Holes: 5
-
Supplementary Article/Info 2: with ABS sensor ring,
with wheel hub - Fitting Position: Rear Axle
- Width [mm]: 61.8
- Bolt Hole Circle Ø [mm]: 100
- Outer Diameter [mm]: 120
- Weight [kg]: 1.639
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 120
- Inner Diameter [mm]: 30
- Width [mm]: 61.5
- SVHC: No SVHC present!
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: FAG
-
Fitting Position: Right,
Left, Rear Axle - Number of Holes: 5
- Supplementary Article/Info 2: with rubber mount
- Number of Teeth 1: 43
- Manufacturer: SNR