• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 82
• Overall Length [mm]: 94
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink flake coated
• Strength class: 10.9
• Axle: Independent wheel suspension
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 0BD, 0BE, 0N4, 1X1
• Model Year from: 2013
• Weight [kg]: 0.127
• Packaging length [cm]: 10.1
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.6
• Manufacturer: FEBEST

• for PR number: 0N4, 1X1
• Model Year from: 2013
• Weight [kg]: 0.23
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST
• Lisainfo: 2398-007-KIT FEBEST
• Additional information: 2398-007-KIT FEBEST

• Model Year from: 2013
• Weight [kg]: 0.107
• Packaging length [cm]: 9.2
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Lower, both sides
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Screw length below head [mm]: 97
• Overall Length [mm]: 109
• Bolt Head-/Nut Design: Male Hex
• Strength class: 10.9
• Surface: Zink flake coated
• Axle: Independent wheel suspension
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 2013
• Model Year to: 2017
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.2
• Packaging length [cm]: 20
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Material: Thermoplast
• Weight [g]: 129
• Component Number: 2
• Name: IM 51269
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-033
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AD-VW-034
• Manufacturer: NTY
• Name: NTY AD-VW-034

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: AD-VW-035
• Supplementary Article/Info 2: without bearing
• Manufacturer: NTY
• Name: NTY AD-VW-035

• Model Year from: 2013
• Model Year to: 2017
• Fitting Position: Rear Axle
• Diameter [mm]: 14
• Weight [kg]: 0.195
• reinforced version:
• Packaging length [cm]: 19.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 247
• Manufacturer: METALCAUCHO

• for OE number: 1K0412303L
• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [g]: 170
• Component Number: 2
• Name: IM 50491
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• only in connection with: 803 010
• Block Separation:
• Manufacturer: JP GROUP

Suspension: for vehicles with standard suspension, for vehicles with bad road version

• Fitting Position: Front Axle
• Lisainfo: Top Strut Mounting
• Additional information: Top Strut Mounting

• for PR number: 0N4, 1X1
• Model Year from: 2013
• Weight [kg]: 0.141
• Packaging length [cm]: 10.7
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Width [mm]: 127
• Thickness [mm]: 40
• Inner Diameter [mm]: 78
• Outer Diameter [mm]: 127
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.31
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 44799 FEBI
• Additional information: 44799 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle both sides
• Suspension: for vehicles with standard suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• for OE number: 5Q0511357Q
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 227
• Component Number: 2
• Name: IM 50341
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 5Q0511357F
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [g]: 229
• Component Number: 2
• Name: IM 51039
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Axle: Four-Link Axle
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Axle: Twist-beam Rear Axle

• Quantity: 1, 2
• Construction Year from: 05.2015
• Construction Year to: 05.2015
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Material: Rubber/Metal
• Required quantity: 2
• Name: TG TED22900
• Manufacturer: TEDGUM

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per axle: 2
• Name: SK VKD35052
• Manufacturer: SKF

• Fitting Position: Front Axle
• for OE number: 1K0412303B
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Alternative Repair Kit: 118 038
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.392
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 30 94 0171

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Alternative Repair Kit: 37574 01
• Manufacturer: LEMFORDER

for OE number: 5Q0 412 331 C, 5Q0 412 331 D, 5Q0 412 331 E, 5QD 412 331 A, 5QD 412 331 C SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Name: COC 49495777
• Manufacturer: CORTECO

• Fitting Position: Front Axle
• for OE number: 1K0412303AA
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Inner Diameter [mm]: 14
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Axle: Rigid Axle
• Length [mm]: 133
• Material: PU (Polyurethane), Thermoplast
• Fitting Position: Rear Axle
• Weight [kg]: 0.392
• Manufacturer: FEBI BILSTEIN
• Additional information: FE175365
• Lisainfo: FE175365

Suspension: for vehicles without sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Construction Year from: 05.2015
• Construction Year to: 05.2015
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: VIKA

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Suspension: for vehicles without electronic suspension control
• Name: COC 49495773
• Manufacturer: CORTECO

Axle: Independent wheel suspension, not for single wheel suspension

• Model Year from: 2013
• Fitting Position: Front Axle
• Weight [kg]: 0.33
• Packaging length [cm]: 12.7
• Packaging width [cm]: 12.7
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 5Q0 412 249 E, 5Q0 412 249 F
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Quantity: 1, 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Weight [g]: 812
• Supplementary Article/Info 2: without bearing
• Component Number: 2
• Name: IM 37649
• Manufacturer: ORIGINAL IMPERIUM

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 60
• for OE number: 5Q0513353G
• Manufacturer: SASIC

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR
• Name: SN KB954.08

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Manufacturer: SACHS

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: LU 814018310
• Manufacturer: FAG

• Quantity: 1, 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Observe dimensions:
• Support plate diameter [mm]: 10.2
• Quantity per axle: 2
• Housing diameter pressure stop [mm]: 60.5
• Manufacturer: LEMFORDER

for OE number: 5Q0 513 353 E, 5Q0 513 353 G, 5Q0 513 353 J, 5QD 513 353, 5QD 513 353 B SVHC: No information available, please contact the manufacturer!

• Quantity: 2
• Inner Diameter [mm]: 14
• Weight [kg]: 0.8
• Supplementary Article/Info 2: without ball bearing
• Mounting Type: Rubber-Metal Mount
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: suspension strut storage; front
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Material: Aluminium
• Manufacturer: METZGER

• Quantity: 2
• Fitting Position: Rear Axle
• General Information: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Suspension: for vehicles without electronic suspension control
• for PR number: G09
• Fitting Position: Front Axle
• Weight [kg]: 0.376
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CKFC, CRMB, CYKA
• Construction Year from: 02.2014
• Vehicle Identification Number (VIN) from: 5E-D-000 001
• Vehicle Identification Number (VIN) to: 5E-8J006446
• Axle: Rigid Axle
• Suspension: for vehicles without lowered suspension
• for PR number: 7ZV
• Fitting Position: Rear Axle
• Manufacturer: BILSTEIN
• Name: BI 11-305934

• Fitting Position: Rear Axle
• Manufacturer: KAYABA
• Additional information: SM9925
• Lisainfo: SM9925

Technical Information: mounting (x1) / / / Fastenings : suspension mounting bolt/screw (x2), mounting washer (x4)

• Quantity: 2
• Inner Diameter [mm]: 78
• Thickness [mm]: 40
• Outer Diameter [mm]: 127
• Width [mm]: 127
• Weight [kg]: 0.31
• Material: Plastic, Metal
• Bearing Type: Rolling Bearing
• Required quantity: 2
• Fitting Position: Front Axle
• General Information: deep groove ball thrust bearing; front
• Manufacturer: BORSEHUNG

• Quantity: 2
• Construction Year from: 05.2015
• Construction Year to: 05.2015
• Supplementary Article/Info 2: without ball bearing
• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.8
• Required quantity: 2
• Inner Diameter [mm]: 14
• General Information: suspension strut storage; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: BORSEHUNG

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.27

• Fitting Position: Front Axle
• Quantity per axle: 1
• General Information: Twin Pack for axle repair
• Name: SK VKD35052T
• Manufacturer: SKF

• Fitting Position: Front Axle both sides
• Supplementary Article/Info 2: with rolling bearing
• Quantity per axle: 2
• Replace in pairs only:
• for components see parts list:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BILSTEIN
• Name: BI 12-273096

• Quantity: 2
• Quantity Unit: Kit
• Fitting Position: Front Axle
• General Information: repair kit for shock absorber; front
• Manufacturer: BORSEHUNG

• Engine Code: CKFC
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.1
• Supplementary Article/Info 2: with ball bearing
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: MEYLE

• Engine Code: CKFC
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.3
• Supplementary Article/Info 2: with ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Supplementary Article/Info 2: with rolling bearing
• Number of Parts [parts]: 2
• Manufacturer: METZGER

Manufacturer: AUTO-GH