Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for OE number: 191199233,
1H0199233A - Fitting Position: Front
- Outer Diameter [mm]: 24
- Weight [g]: 62
- Colour Coding: green
- Inner Diameter [mm]: 24
- Length [mm]: 40
- Width [mm]: 40
- Manufacturer: IMP
Name: PODUSZKA SIL. SEAT CORDOBA, IBIZA, INCA, TOLEDO, VW BORA, CADDY, CORRADO, GOLF, ILTIS, JETTA, NEW BEETLE, PASSAT, POLO, SCIROCCO 08.83-12.13
- Width [mm]: 39.5
- Mounting Type: Rubber Mount
- Fitting Position: Front
- Material: Rubber
- Outer Diameter [mm]: 24
- Weight [kg]: 0.095
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front,
both sides - Height [mm]: 40
- Outer Diameter [mm]: 50
- Inner Diameter 1 [mm]: 16
- Inner Diameter 2 [mm]: 24
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Rear
-
Fabrication Number: ZPS-
VW- 114 - Mounting Type: Hydro Mount
- for OE number: 1H0199402
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Left Rear
-
Mounting Type: Rubber-
Metal Mount -
Name: KINNITUS,
AUTOMAATKIGUKAST - Manufacturer: MAX
- Fitting Position: Left Rear
- Mounting Type: Hydro Mount
-
Lisainfo: Rubber mount,
engine support, rear, left -
Additional information: Rubber mount,
engine support, rear, left
- Fitting Position: Left Rear
- Weight [kg]: 0.62
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 620
- Manufacturer: METALCAUCHO
- Fitting Position: Left Rear
- Weight [kg]: 0.72
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Left
- Weight [kg]: 0.6
- Required quantity: 1
-
Material: Rubber/
Metal - Weight [g]: 600
- Manufacturer: METALCAUCHO
- Fitting Position: Left Rear
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.62
-
Name: DY 71-
22650 - Manufacturer: DYS
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Left Rear
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Lower,
Left Rear - Mounting Type: Hydro Mount
- Name: Transmission mounting left
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW GOLF III/ VENTO
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW GOLF III/ VENTO
(kvaliteediklass: PJ)"
- Fitting Position: Left
- Diameter [mm]: 73
- Weight [kg]: 0.67
- Mounting Type: Hydro Mount
- Weight [g]: 670
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear,
Right -
Fabrication Number: ZPS-
VW- 117 -
Mounting Type: Rubber-
Metal Mount - for OE number: 1H0199262A
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1H0199402
- Fitting Position: Left Rear
- Required quantity: 1
-
Material: Rubber/
Metal - Weight [g]: 683
- Colour Coding: green
- Manufacturer: IMP
Name: PODUSZKA SIL. SEAT CORDOBA, IBIZA, INCA, TOLEDO, VW CADDY, GOLF, PASSAT, POLO, VENTO 01.85-01.04 LE TY
- Mounting Type: Hydro Mount
- Fitting Position: Right Rear
-
Material: Rubber/
Metal - for OE number: 1H0 199 262 F
- Manufacturer: MERTZ
-
Engine Code: ADZ,
ABS -
Material: Rubber/
Metal - Fitting Position: Right Rear
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
-
Engine Code: ABS,
ADZ - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
engine support, front -
Additional information: Rubber mount,
engine support, front
- Fitting Position: Left Rear
- Colour Coding: green
- Mounting Type: Hydro Mount
- Weight [kg]: 0.72
- Required quantity: 1
- General Information: bonded rubber bush
- Manufacturer: VIKA
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Front
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Colour Coding: blue
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front
- Transmission Type: Manual Transmission
-
Lisainfo: Console for engine,
front -
Additional information: Console for engine,
front
-
Fitting Position: Front,
Centre -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 1.03
-
Name: DY 71-
22676 - Manufacturer: DYS
- Fitting Position: Left Rear
-
Mounting Type: Rubber-
Metal Mount -
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
- Transmission Type: Manual Transmission
- Fitting Position: Front
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Left Front
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MAX
- Fitting Position: Right Rear
-
Mounting Type: Rubber-
Metal Mount - for OE number: 1H0199262A
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount,
engine support, front -
Additional information: Rubber mount,
engine support, front
-
Engine Code: ABS,
ADZ, ACC - Fitting Position: Right Rear
- Mounting Type: Hydro Mount
- Colour Coding: yellow
- Manufacturer: JP GROUP
-
Lisainfo: Rubber mount,
engine support, rear, right -
Additional information: Rubber mount,
engine support, rear, right
-
Engine Code: ADZ,
ABS -
Material: Rubber/
Metal - Fitting Position: Right Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 1.56
- for OE number: 1H0 199 262 A
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ADZ,
ABS - Fitting Position: Left Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.72
- Manufacturer: SWAG
- Name: SW 30 13 0011
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Right Rear
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 05.1994
- Construction Year to: 03.1995
- Fitting Position: Front
- Manufacturer: BGA
-
Engine Code: ADZ,
ABS - Fitting Position: Left Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 0.72
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Weight [kg]: 1.14
-
Mounting Type: Rubber-
Metal Mount -
Weight [g]: 1,
140 - Manufacturer: METALCAUCHO
-
Engine Code: ADZ,
ABS -
Material: Rubber/
Metal - Fitting Position: Right Rear
- Mounting Type: Hydro Mount
- Weight [kg]: 1.56
- for OE number: 1H0 199 262 A
- Manufacturer: SWAG
- Name: SW 30 10 7121
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Manufacturer: DELPHI
-
Engine Code: ADZ,
ABS -
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 1.08
- for OE number: 1H0 199 609 F
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1998
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Upper Right,
Front - for OE number: 1H0199609F
- Manufacturer: SASIC
-
Engine Code: ADZ,
ABS -
Material: Rubber/
Metal - Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - for OE number: 1H0 199 609 F
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1H0199609E
- Fitting Position: Front
- Required quantity: 1
-
Material: Rubber/
Metal -
Weight [g]: 1,
260 - Colour Coding: blue
- Manufacturer: IMP
Name: PODUSZKA SIL. SEAT CORDOBA, IBIZA, INCA, TOLEDO, VW CADDY, GOLF, PASSAT, POLO, VENTO 10.91-01.04 PRZàD
- Fitting Position: Front
- Weight [kg]: 1
- Manufacturer: CORTECO
- Fitting Position: Left Front
- Mounting Type: Hydro Mount
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
- Fitting Position: Front
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 1.07
-
Name: DY 71-
22074 - Manufacturer: DYS
- Fitting Position: Right Rear
- Weight [kg]: 1.55
-
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount -
Weight [g]: 1,
550 - Manufacturer: METALCAUCHO
-
Engine Code: ABS,
ACC, ADZ - Fitting Position: Right Rear
-
Mounting Type: Rubber-
Metal Mount - Colour Coding: yellow
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: MEY
- Fitting Position: Right Rear
- Weight [kg]: 1.58
- Manufacturer: CORTECO
- Construction Year from: 11.1993
-
Fitting Position: Right,
Rear -
for OE number: 1H0 199 262 A,
1H0 199 262 F - Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 11.1993
-
Fitting Position: Centre,
Front - for OE number: 1H0 199 609 F
-
Name: PAIGUTUS,
MOOTOR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Required quantity: 1
- Fitting Position: Front
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.