Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Connector rod to console
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: at the intermediate lever
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) from: 6K-
ZR106941, 6K- ZR632593 - Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Centre
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: ABU/
AEE - Fitting Position: transmission sided
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: Rear
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Transmission Type: 5-
Speed Manual Transmission - Manufacturer: JP GROUP
-
Lisainfo: Shift finger,
5 speed manual -
Additional information: Shift finger,
5 speed manual
- Fitting Position: Connector rod to console
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.003
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: at the intermediate lever
- Manufacturer: 3RG
-
Fitting Position: at the intermediate lever,
at gearshift linkage - Colour: Ivory White
- Vehicle Equipment: for vehicles with manual transmission
-
Name: Puks,
kigu- / llitusvarras - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: at gearshift linkage,
Connector rod to console - Colour: Milk White
- Manufacturer: TOPRAN
Vehicle Equipment: for vehicles with gearshift linkage, for vehicles with manual transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 6K-
ZR106941, 6K- ZR632592 -
Transmission Type: 5-
Speed Manual Transmission - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Construction Year to: 12.1999
- Length [mm]: 60
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: MAX
-
Transmission Type: 5-
Speed Manual Transmission -
Vehicle Identification Number (VIN) to: 6K-
ZR106941, 6K- ZR632592 -
Material: GRP
(Glass fibre Reinforced Plastic) - Mounting Type: Clipped
- Manufacturer: TOPRAN
- Lisainfo: 102 848 HP
- Additional information: 102 848 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
-
Vehicle Identification Number (VIN) from: 6K-
ZR106941, 6K- ZR632593 -
Material: GRP
(Glass fibre Reinforced Plastic) - Housing material: Polyamid 6.6
- Overall Length [mm]: 64.1
- Mounting Type: Clipped
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Transmission Type: for manual transmission
- Manufacturer: 3RG
- Length [mm]: 60
- Weight [kg]: 0.009
- Required quantity: 1
- Weight [g]: 9
- Manufacturer: METALCAUCHO
- Required quantity: 1
- Fitting Position: Transverse
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Inner Diameter [mm]: 13
- Length [mm]: 74
- Manufacturer: 3RG
-
Vehicle Identification Number (VIN) from: 6KZR632593,
6KZR106942 - Block Separation:
- Length [mm]: 46
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.008
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with gearshift linkage
-
Housing material: GRP
(Glass fibre Reinforced Plastic) - Shaft Material: Metal
- Mounting Type: Clipped
- Shaft Form: straight
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 12.1999
- Length [mm]: 22
- Fitting Position: Front
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: MAX
- Construction Year to: 12.1999
- Length [mm]: 220
- Fitting Position: Front
- Weight [kg]: 0.066
- for OE number: 1H0 711 574
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.1999
- Length [mm]: 220
- Fitting Position: Front
- Weight [kg]: 0.066
- for OE number: 1H0 711 574
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Length [mm]: 220
- Weight [kg]: 0.06
- Required quantity: 1
- Weight [g]: 60
- Manufacturer: METALCAUCHO
- Construction Year to: 12.1999
- Length [mm]: 60
- Weight [kg]: 0.01
- Fitting Position: Transverse
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 7
- Radial Shaft Seal Design: AS
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Construction Year to: 12.1999
- Length [mm]: 60
- Weight [kg]: 0.01
- Fitting Position: Transverse
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Width [mm]: 7
- Radial Shaft Seal Design: B SL
- Swirl Type: without twist
-
Name: RONGASTIHEND,
LLITUSHOOVASTIK - Manufacturer: REI
-
Lisainfo: 81-
15293- 10 -
Additional information: 81-
15293- 10
- Construction Year to: 09.1996
- Fitting Position: in transmission housing
-
Name: PUKS,
LLITUSVARRAS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
- Mounting Type: Bushing
- Supplementary Article/Supplementary Info: with Plastic Bushing
-
Name: Puks,
llitusvarras - Manufacturer: MAX
- Vehicle Equipment: for vehicles with gearshift linkage
- Mounting Type: Bushing
- Supplementary Article/Supplementary Info: with Plastic Bushing
-
Name: PUKS,
LLITUSVARRAS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.03
- Weight [g]: 30
- Manufacturer: METALCAUCHO
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: at gearshift linkage
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Additional information: 886.780 ELRING
- Lisainfo: 886.780 ELRING
- General Information: bearing ring
- Manufacturer: VIKA
- Outer Diameter [mm]: 24
- Thickness [mm]: 7
- Inner Diameter [mm]: 15
- Weight [kg]: 0.009
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: black
- Manufacturer: DPA
General Information: gearstick knob with boot for gearstick lever; black
-
Vehicle Identification Number (VIN) from: 6K-
ZR045738, 6K- ZR559282 - Vehicle Equipment: for vehicles with manual transmission
- Colour: black
- Colour Code: 9PV
- Surface: Synthetic leather
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with gearshift linkage
- Manufacturer: JP GROUP
- Lisainfo: Relay shaft for shift mechanism
- Additional information: Relay shaft for shift mechanism
- Fitting Position: at gearshift linkage
- Base body material: Metal
-
Name: KIGU-
/ LLITUSKANG - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.045
- Manufacturer: 3RG
- Transmission Type: Manual Transmission
- Length [mm]: 81
- Weight [kg]: 0.1
- Weight [g]: 100
- Manufacturer: METALCAUCHO
- Length [mm]: 81
- Manufacturer: 3RG
- Vehicle Equipment: for vehicles with gearshift linkage
- Fitting Position: at gearshift linkage
-
Name: SIDURIKAHVEL,
SIDUR - Manufacturer: MAX
- Vehicle Equipment: for vehicles with gearshift linkage
- Weight [kg]: 0.27
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: at gearshift linkage
- Length (long side) [mm]: 110
- Manufacturer: 3RG
-
Fabrication Number: NXX-
VW- 018 - Manufacturer: NTY
-
Name: NTY NXX-
VW- 018
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Length [mm]: 1,
745 - Manufacturer: LINEX