Lisainfo: (AM) Mehaaniline pump vana andur ei sobi

• Supplementary Article/Info 2: with plug
• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• for OE number: 4F0973702
• Manufacturer: ABAKUS
• Lisainfo: ABA120-00-243
• Additional information: ABA120-00-243

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• Seal Material: Rubber
• Manufacturer: KAMOKA

• Operating Mode: Mechanical
• Lisainfo: Water Pump
• Additional information: Water Pump

• Supplementary Article/Info 2: without integrated disabling contact
• Version: Not Switchable
• Overall Height [mm]: 98
• Diameter [mm]: 54
• Manufacturer: ASHIKA

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 22SKV032

• New Part:
• Operating Mode: Mechanical
• Manufacturer: DOLZ
• Name: DO A255

Manufacturer: JPN

• Version: Not Switchable
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 54.5
• Impeller Diameter [mm]: 70.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: GRAF POMPY WODY

Supplementary Article/Info 2: without integrated disabling contact, with seal ring, non-switchable water pump

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: KAMOKA

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Supplementary Article/Supplementary Info: without solenoid valve, with gasket/seal
• Supplementary Article/Info 2: non-switchable water pump
• Number of blades/vanes: 7
• Pulleys: without belt pulley
• Weight [kg]: 0.725
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Fabrication Number: EZC-VW-438
• Manufacturer: NTY
• Name: NTY EZC-VW-438

• General Information: solenoid valve
• Manufacturer: VIKA

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5Q0965567
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: water pump; without variable flow
• Manufacturer: VIKA

• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with water pump gasket
• Technical Information: SKF Aquamax
• Name: SK VKPC81178
• Manufacturer: SKF

Supplementary Article/Info 2: without integrated disabling contact, non-switchable water pump

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5Q0965561B
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 7N0965561
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• Version: Not Switchable
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 54.5
• Impeller Diameter [mm]: 70.4
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Manufacturer: GRAF
• Lisainfo: PA1360A-8
• Additional information: PA1360A-8

Supplementary Article/Info 2: with seal ring, with integrated disabling contact, non-switchable water pump

• Fabrication Number: CPZ-VW-019
• Operating Mode: Electric
• Manufacturer: NTY
• Name: NTY CPZ-VW-019

• Operating Mode: Mechanical
• Supplementary Article/Info 2: non-switchable water pump
• for OE number: Part of 04L121011N
• Manufacturer: SASIC

• New Part:
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 8TW358304721
• Manufacturer: HELLA

• Fitting Position: Rear
• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Brake System: Bosch
• for combined PR number: 9M1+9M9
• Operating Mode: Electric
• Manufacturer: GRAF POMPY WODY

• for OE number: 04L 121 011 EX
• Supplementary Article/Supplementary Info: without integrated regulator
• Supplementary Article/Info 2: without integrated disabling contact
• Operating Mode: Mechanical
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 3
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: oval
• Housing Colour: black
• Hose Diameter [mm]: 22
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Manufacturer Restriction: PIERBURG
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear
• Supplementary Article/Supplementary Info: with holder
• for OE number: 5Q0121599M
• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Housing Type: without housing
• Operating Mode: Electric
• Name: DO EA530A
• Manufacturer: DOLZ

• for OE number: 5Q0965561B
• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Vehicle configuration line / variant: AUX
• for OE number: 5Q0965561B
• Operating Mode: Electric
• Name: DA DEP1019
• Manufacturer: DAYCO

• Number of connectors: 2
• Weight [kg]: 0.29
• for OE number: 7N0 965 561 B
• Supplementary Article/Info 2: with cable
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.68

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle configuration line / variant: TB
• for OE number: 04L121011N
• Weight [kg]: 1.1
• Supplementary Article/Info 2: non-switchable water pump
• Name: DA DP884
• Manufacturer: DAYCO

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal, without integrated regulator
• Water pump impeller material: Metal
• Manufacturer: HEPU

Supplementary Article/Info 2: non-switchable water pump, with bolts/screws, without integrated disabling contact

• Engine Code: CUVC, DFLA
• Construction Year to: 12.2019
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: without holder
• Manufacturer: BOSCH

• Construction Year to: 12.2019
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5G0 965 567
• Supplementary Article/Supplementary Info: with holder
• Flow rate [l/h]: 500
• Manufacturer: HEPU

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Name: SW 33 10 3305
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CUVC, DFLA, DLTA
• Manufacturer: MAGNETI MARELLI

• Engine Code: CUVC
• for OE number: 04L 121 011
• Manufacturer: FAI AUTOPARTS

Supplementary Article/Info 2: without integrated disabling contact, without sensor

• Operating Mode: Electric
• Quality: OE EQUIVALENT
• for OE number: 8K0819147A
• Manufacturer: MEAT & DORIA

• Fitting Position: Right, Left
• Name: SN WPEA013
• Manufacturer: SNR

• Engine Code: CUVC, DFLA
• Construction Year to: 12.2019
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: with holder
• Manufacturer: BOSCH

• for OE number: 5Q0965561B
• Operating Mode: Electric
• Name: DO EA549A
• Manufacturer: DOLZ

• Number of Teeth: 145
• Width [mm]: 25
• Weight [kg]: 2.05
• for OE number: 04L109243B
• for article number: A255
• Manufacturer: DOLZ
• Name: DO KD153

• Connector Shape: oval
• Material: Plastic
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: NISSENS

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as brackets in the box when mounted in exposed position

• Weight [kg]: 0.91
• Operating Mode: Electric-hydraulic
• Supplementary Article/Info 2: without integrated disabling contact
• Version: SWITCHABLE
• Specification: AIRTEX SW PATENTED
• Name: AI 1978
• Manufacturer: AIRTEX

• for OE number: 5Q0 965 567 J
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Water Pump Type: for timing belt drive
• Operating Mode: Electric
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538073310

• Engine Code: CUVC, DFLA
• Block Separation:
• Operating Mode: Electric-hydraulic
• Water pump impeller material: Plastic
• Impeller Diameter [mm]: 70.3
• Number of blades/vanes: 7
• Belt Pulley Ø [mm]: 54.2
• Supplementary Article/Info 2: with seal ring, switchable water pump
• Manufacturer: PIERBURG

• Water Pump Type: for timing belt drive
• Number of bolts/screws: 3
• Water pump impeller material: Plastic
• Colour: blue, black
• Supplementary Article/Supplementary Info: with gaskets/seals
• Technical Information: SKF Aquamax
• Manufacturer: SKF
• Name: SK VKPC81278

Supplementary Article/Info 2: with integrated disabling contact, switchable water pump

• Version: Not Switchable
• Number of Teeth 1: 145
• Width 1 [mm]: 25
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

Supplementary Article/Info 2: without integrated disabling contact, non-switchable water pump

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Supplementary Article/Info 2: switchable water pump
• Number of blades/vanes: 7
• Weight [kg]: 0.85
• Name: SW 33 11 0349
• Manufacturer: SWAG

Supplementary Article/Supplementary Info: with solenoid valve, with fastening/mounting material, with gasket/seal General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• Supplementary Article/Info 2: switchable water pump
• Manufacturer: DOLZ
• Name: DO A255V
• Additional information: A-255V DOLZ
• Lisainfo: A-255V DOLZ

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 3
• Number of Teeth: 145
• Name: SN KDP457.790
• Manufacturer: NTN-SNR

• Operating Mode: Electric
• for OE number: 5Q0121599AA
• Manufacturer: MEAT & DORIA

• Width [mm]: 25
• Water pump impeller material: Metal
• Number of Teeth: 145
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: non-switchable water pump
• Belts: with rounded tooth profile
• Weight [kg]: 2.021
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with integrated regulator, with gasket/seal
• Manufacturer: HEPU

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact, with bolts/screws

• Version: Not Switchable
• Number of Teeth 1: 145
• Width 1 [mm]: 25
• Supplementary Article/Info 2: non-switchable water pump
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Weight [kg]: 0.88
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Operating Mode: Electric
• Manufacturer: CONTITECH

Supplementary Article/Info 2: switchable water pump, with integrated disabling contact

• Vehicle configuration line / variant: TB
• for OE number: 04L121011N
• Weight [kg]: 1.3
• Supplementary Article/Info 2: switchable water pump
• Name: DA DP1981
• Manufacturer: DAYCO

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -CUVCDFLA # Mt
• Number of Teeth: 145
• Width [mm]: 25
• Length [mm]: 1,381
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.3
• Supplementary Article/Info 2: non-switchable water pump
• Name: DA KTBWP8840
• Manufacturer: DAYCO

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT5170, GAT5247, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES
• Lisainfo: KP15678XS GAT
• Additional information: KP15678XS GAT

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 04L965567A
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• reinforced version:
• Belt Pulley Ø [mm]: 54
• Manufacturer: VALEO

• Engine Code: CUVC
• for OE number: 5Q0 965 561 B
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Water Pump Type: for timing belt drive
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 25
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 145
• Manufacturer: SKF

Supplementary Article/Info 2: with studs, without integrated disabling contact, non-switchable water pump

• Construction Year from: 01.2016
• Engine Code: CUVC, DFLA
• Holder Type ID: 93AL
• Block Separation:
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5Q0 121 599 Q
• Manufacturer: PIERBURG

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5Q0 965 561 B, 65 06500 6001
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: HEPU

• Weight [kg]: 2.23
• Operating Mode: Electric-hydraulic
• Supplementary Article/Info 2: without integrated disabling contact
• Version: SWITCHABLE
• Specification: AIRTEX SW PATENTED
• Number of belts: 1
• Name: AI WPK-197801
• Manufacturer: AIRTEX

• Driven Units: Water Pump, Camshaft
• Number of belts: 1
• Width [mm]: 25
• Number of Teeth: 145
• Pulleys contained: 3
• Manufacturer: HEPU

Supplementary Article/Info 2: non-switchable water pump, without integrated disabling contact, with bolts/screws

• Width 1 [mm]: 25
• Number of Teeth: 145
• Number of track rollers: 3
• Number of belts: 1
• Manufacturer: SNR
• Name: SN KDP457.790S

• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Engine Code: CUVC
• Number of connectors: 3
• Diameter 1 [mm]: 22.3
• Diameter 2 [mm]: 22.3
• Weight [kg]: 0.212
• for OE number: 5Q0 965 561 B
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -KTBWP
• Number of Teeth: 145
• Width [mm]: 25
• Length [mm]: 1,381
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.6
• Supplementary Article/Info 2: switchable water pump
• Name: DA KTBWP8841
• Manufacturer: DAYCO

• Number of Teeth 1: 145
• Width 1 [mm]: 25
• Supplementary Article/Info 2: switchable water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 530065030
• Lisainfo: 530065030
• Additional information: 530065030