Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles with direct shift transmission
-
Transmission Type: Dual-
Clutch Transmission - Filter type: Filter Insert
-
Lisainfo: Hydraulic filter,
gearbox, 6 speed aut. -
Additional information: Hydraulic filter,
gearbox, 6 speed aut.
-
Transmission Type: 6-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Width [mm]: 58
- Height [mm]: 105
- Transmission Code: DQ250
- Manufacturer: KAMOKA FILTRY
- Height [mm]: 106
- Outer Diameter [mm]: 58
- Vehicle Equipment: for vehicles with direct shift transmission
- Filter type: Filter Insert
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
-
Fabrication Number: FSF-
AU- 012
Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Code: DSG6
(DQ250) - Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Height [mm]: 105
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 55
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Type: Dual-
Clutch Transmission - Filter type: Filter Insert
-
Outer Diameter [mm]: 58,
56 - for OE number: 02E 305 051 C
- Supplementary Article/Supplementary Info: with seal
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAX
- Filter type: Filter Insert
- Diameter [mm]: 58
- Height [mm]: 106
- Inner Diameter [mm]: 17
- Transmission Type: Automatic Transmission
- Supplementary Article/Supplementary Info: Incl. Gasket Set
- Quality class: PJ
- Name: Automatic transmission filter
- Filter type: Filter Insert
-
Transmission Type: Dual-
Clutch Transmission - Height [mm]: 106
- Outer Diameter [mm]: 58
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 17.5
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: ALC
-
Transmission Code: DSG6
(DQ250) -
Transmission Type: Manual-
/ optional automatic transmission - Outer Diameter [mm]: 58
- Inner Diameter [mm]: 29
- Height [mm]: 106
- Manufacturer: HENGST FILTER
-
Transmission Type: 6-
Speed Dual- Clutch Transmission - Supplementary Article/Supplementary Info: with seal
- Quantity Unit: Piece
- Transmission Code: DQ250
- Filter type: Filter Insert
-
Name: HDRAULIKAFILTER,
AUTOMAATKIGUKAST - Manufacturer: MEY
- Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Diameter [mm]: 58.1
- Height [mm]: 106.1
- Inner Diameter 2 [mm]: 17
- Packaging height [cm]: 13.1
- Packaging length [cm]: 7
- Packaging width [cm]: 7
- Net Weight [g]: 74
- Manufacturer: KNECHT
- Name: KN HX132D
- Lisainfo: HX 132D MAH
- Additional information: HX 132D MAH
-
Transmission Code: DSG6
(DQ250) - Transmission Type: Automatic Transmission
- Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Height [mm]: 105
- Inner Diameter [mm]: 11
- Outer Diameter [mm]: 55
- SVHC: No SVHC present!
-
Name: Hdraulikafilter,
automaatkigukast - Manufacturer: MAN
-
Transmission Code: 02E,
0D9, DQ250 - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- Height [mm]: 106
- Outer Diameter [mm]: 58
- Filter type: Filter Insert
- Vehicle Equipment: for vehicles with direct shift transmission
- Weight [kg]: 0.1
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
-
Lisainfo: V10-
0440 VAI -
Additional information: V10-
0440 VAI
Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: 02E,
0D9, DQ250 - Outer Diameter [mm]: 58
- Height [mm]: 106
- Vehicle Equipment: for vehicles with direct shift transmission
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- Weight [kg]: 0.111
- Filter type: Filter Insert
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
- Quality class: PJ
- Name: Automatic transmission filter
Transmission Type: 6-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Transmission Type: for transfer case
-
Transmission Code: HALDEX GEN IV/
GEN 4 - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with lid
- Manufacturer: MAX
-
Lisainfo: 26-
2086 -
Additional information: 26-
2086
Name: Hdraulikafilter, tisveoga soiduki mitme kettaga sidur
- Fitting Position: Rear Axle
- Transmission Type: for transfer case
-
Transmission Code: HALDEX GEN IV/
GEN 4 - Filter type: Filter Insert
- Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with lid
- Manufacturer: METZGER
- Transmission Type: Differential Gear
-
Axle Gear ID: KMC,
MMK, PYG - Block Separation:
- Height [mm]: 61
- Inner Diameter [mm]: 5
- Outer Diameter [mm]: 38
- Weight [kg]: 0.1
-
Supplementary Article/Info 2: with bolts/
screws, with cap -
Supplementary Article/Supplementary Info: for multi-
plate clutch - Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.