• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Right, Front Axle Left
• Required quantity: 1
• Block Separation:
• Control/Trailing Arm Type: Control Arm
• for article number: 58011902 / 58012001
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle Right, Front Axle Left
• Required quantity: 1
• Control/Trailing Arm Type: Control Arm
• for article number: 58011902 / 58012001
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

• Fitting Position: Front Axle Right, Front Axle Left
• replacement in pairs recommended:
• Required quantity: 2
• Name: Remondikomplekt,ootshoob
• Manufacturer: MEY
• Lisainfo: 1006100061
• Additional information: 1006100061

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Fabrication Number: ZWD-VW-038A
• paired article number: ZWD-VW-039A

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Fabrication Number: ZWD-VW-039A
• paired article number: ZWD-VW-038A

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: ZWT-VW-023
• Manufacturer: NTY

• Axle alignment required after fitting:
• paired article number: V10-3907
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Front Axle Right
• Quantity Unit: Set
• Weight [kg]: 0.841
• Manufacturer: VAICO

Supplementary Article/Info 2: with rubber mount, with ball joint, with lock screw set General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: Control Arm
• Control/Trailing Arm Design: Triangular Control Arm
• Fitting Position: Front Axle Right, Front Axle Left
• Material: Sheet Steel
• Supplementary Article/Supplementary Info: with rubber-metal mounts
• Supplementary Article/Info 2: without ball joint
• Surface: Cathodic Painting, Black-painted
• Also available as set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with bush
• Control/Trailing Arm Type: Control Arm
• General Information: Attachment_Method:Straight Type
• Manufacturer: CTR

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• paired article number: 72-3785
• Material: Sheet Steel
• Supplementary Article/Info 2: with nut, with bearing, with ball joint
• Name: Ootshoob, k„„ndmik
• Manufacturer: MAX
• Lisainfo: MGZ-101124
• Additional information: MGZ-101124

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• paired article number: 72-3794
• Material: Sheet Steel
• Supplementary Article/Info 2: with bearing, with nut, with ball joint
• Name: Ootshoob, k„„ndmik
• Manufacturer: MAX
• Lisainfo: MGZ-101115
• Additional information: MGZ-101115

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Info 2: with rubber mount, with ball joint
• reinforced version:
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Required quantity: 1
• paired article number: 116 610 0000/HD
• Name: Remondikomplekt,ootshoob
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• reinforced version:
• Replace in pairs only:
• with environmental seal: Carbon neutral
• Required quantity: 1
• paired article number: 116 610 0001/HD
• Name: Remondikomplekt,ootshoob
• Manufacturer: MEY

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP GROUP
• Lisainfo: Wishbone, front
• Additional information: Wishbone, front

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 18
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Rear Axle
• Net weight [kg]: 1,436
• Diameter [mm]: 12
• Length [mm]: 517
• Diameter 1 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G41.2519/S
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWD-VW-039
• paired article number: ZWD-VW-038
• Manufacturer: NTY

Fitting Position: Front Axle Right, Front Axle, outer, Left, Right, Lower

• Control/Trailing Arm Type: Control Arm
• Fabrication Number: ZWD-VW-038
• paired article number: ZWD-VW-039

Fitting Position: Front Axle Left, Front Axle, outer, Left, Right, Lower

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, both sides
• Material: Sheet Steel
• Manufacturer: MAX

Name: Roolimine - K„„ndmik VW P. GOLF 4/A3 LE/PR BEZ SWORZNIA

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle
• Net weight [kg]: 3.06
• Diameter [mm]: 13
• Diameter 1 [mm]: 13
• Supplementary Article/Info 2: without ball joint
• Name: OMG G40.3598/S
• Manufacturer: OMG

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Net weight [kg]: 3.57
• Manufacturer: NK

Name: Roolimine - K„„ndmik VW P. A3/GOLF4/BORA LE KPL.ZE SWORZNIEM

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Net weight [kg]: 3.55
• Manufacturer: NK

Name: Roolimine - K„„ndmik VW P. A3/GOLF4/BORA PR KPL.ZE SWORZNIEM

• Fitting Position: Front Axle, outer, Left, Right, Lower
• Material: Sheet Steel
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 420
• Width [mm]: 390
• Height [mm]: 55
• Manufacturer: DELPHI
• Name: DE TC2010

• Fitting Position: Front Axle Left, Lower Front Axle
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 276.4
• Inner Diameter 1 [mm]: 12.2
• paired article number: TRC0124
• Supplementary Article/Info 2: with ball joint
• Manufacturer: BGA

• Fitting Position: Front Axle, both sides
• Control/Trailing Arm Type: Control Arm
• Name: COC 49398710
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 15
• paired article number: 9050143
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 15
• paired article number: 9050142
• Manufacturer: KAMOKA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Length [mm]: 517
• Inner Diameter [mm]: 12
• Name: ALT 92179AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-01071-1
• Weight [kg]: 3.49
• Name: DY 20-01071-2
• Manufacturer: DYS

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• paired article number: 20-01071-2
• Weight [kg]: 3.49
• Name: DY 20-01071-1
• Manufacturer: DYS

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower, Front Axle both sides
• Required quantity: 2
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321004
• Hole Pitch 1/ Hole Pitch 2: 276,4
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Manufacturer: SKF
• Name: SK VKDS321004

• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 14.8, 14.9
• Control/Trailing Arm Type: Control Arm
• Thread Size 1: M12×1,5
• paired article number: S060339
• Manufacturer: GSP

• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 14.8, 14.9
• Control/Trailing Arm Type: Control Arm
• Thread Size 1: M12×1,5
• paired article number: S060340
• Manufacturer: GSP

• Fitting Position: Front Axle Right
• Steering: with tie rod ends
• Control/Trailing Arm Type: Control Arm
• Manufacturer: VIKA

General Information: Wishbone arm for lower control;front right;with ball

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 3.037
• Supplementary Article/Info 2: with bearing
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Roolimine - K„„ndmik VW P. GOLF 4/A3 LE/PR BEZ SWORZNIA

• paired article number: 19820
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 3.5
• Supplementary Article/Info 2: with bearing, with ball joint
• Supplementary Article/Supplementary Info: with lock nuts
• Name:
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle
• Inner Diameter [mm]: 12
• Name: ALT 79463AL
• Manufacturer: ALTE AUTOMOTIVE

• paired article number: 19822
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 3.5
• Supplementary Article/Info 2: with ball joint, with bearing
• Supplementary Article/Supplementary Info: with lock nuts
• Name:
• Manufacturer: FEB

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Sheet Steel
• replacement in pairs recommended:
• Required quantity: 2
• Manufacturer: MEY

Name: Roolimine - K„„ndmik VW P. GOLF 4/A3 LE/PR BEZ SWORZNIA

• Fitting Position: Lower, Front Axle Right
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321102 B
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Manufacturer: SKF
• Name: SK VKDS321103B

• Fitting Position: Lower, Front Axle Left
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321103 B
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Manufacturer: SKF
• Name: SK VKDS321102B

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Right
• Net weight [kg]: 2,925
• Diameter [mm]: 13
• paired article number: G40.3599/C
• Diameter 1 [mm]: 13
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.3598/C
• Manufacturer: OMG

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle Left
• Net weight [kg]: 2.93
• Diameter [mm]: 13
• paired article number: G40.3598/C
• Diameter 1 [mm]: 13
• Supplementary Article/Info 2: with ball joint
• Name: OMG G40.3599/C
• Manufacturer: OMG

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Supplementary Article/Info 2: without ball joint
• SVHC: No SVHC present!
• Name: Ootshoob, k„„ndmik
• Manufacturer: FAG

• Fitting Position: Front Axle
• Manufacturer: DELPHI
• Name: DE TC1970KIT

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 3.037
• Supplementary Article/Info 2: with bearing
• Manufacturer: SWAG
• Name: SW 32 73 0016

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• paired article number: 49399071
• Manufacturer: CORTECO
• Name: COC 49399127

• Vehicle Identification Number (VIN) to: 1M-1-035 000
• Vehicle Identification Number (VIN) from: 1M-1-035 001
• Quantity: 2
• Fitting Position: Front Axle, Front Axle Right, Lower
• Supplementary Article/Info 2: with rubber sleeves
• Material: Sheet Steel
• Colour: black
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 3.5
• Required quantity: 1
• General Information: wishbone arm; with big and small rubber bush
• Manufacturer: VIKA

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• paired article number: 49399127
• Manufacturer: CORTECO
• Name: COC 49399071

• Fitting Position: Rear Axle, outer, Left, Right, Lower
• Thread Size 2: Bush 12.1
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Length [mm]: 555
• Width [mm]: 54
• Height [mm]: 55
• Manufacturer: DELPHI
• Name: DE TC3265

• Control/Trailing Arm Type: not for control arm
• Manufacturer: SKF
• Name: SK VKDS461000

• paired article number: 30 91 9822
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 3.5
• Supplementary Article/Supplementary Info: with lock nuts
• Supplementary Article/Info 2: with ball joint, with bearing
• Name: SW 30 91 9820
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 30 91 9820
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 3.5
• Supplementary Article/Supplementary Info: with lock nuts
• Supplementary Article/Info 2: with ball joint, with bearing
• Name: SW 30 91 9822
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Lower
• Thread Size 1: M12x1.25
• Thread Size 2: M12x1.25
• Material: Sheet Steel
• paired article number: TC786
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 466
• Width [mm]: 156
• Name: DE TC787
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Lower
• Thread Size 1: M12x1.25
• Thread Size 2: M12x1.25
• Material: Sheet Steel
• paired article number: TC787
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 466
• Width [mm]: 156
• Name: DE TC786
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 1.84
• Name: DY 29-23959
• Manufacturer: DYS

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Weight [kg]: 1.83
• Name: DY 29-23736
• Manufacturer: DYS

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, both sides
• Material: Sheet Steel
• Article number of recommended accessories: 44091 01
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Roolimine - K„„ndmik VW P. GOLF 4/A3 LE/PR BEZ SWORZNIA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Left
• Material: Steel
• Supplementary Article/Info 2: with bolts
• paired article number: FT15535
• Manufacturer: FAST

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle, Right
• Material: Steel
• Supplementary Article/Info 2: with bolts
• paired article number: FT15534
• Manufacturer: FAST

• Fitting Position: Rear Axle, Lower, outer
• Article number of recommended accessories: 8500 29405
• Control/Trailing Arm Type: Semi-Trailing Arm
• Length [mm]: 517
• Name: Ootshoob, k„„ndmik
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• Steering: with tie rod ends
• Control/Trailing Arm Type: Control Arm
• Manufacturer: VIKA

General Information: Wishbone arm for lower control;front left;with ball

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Length [mm]: 465
• Thread Size: M12 x 1,5
• Cone Size [mm]: 18
• paired article number: 79507AL
• Name: ALT 79512AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Length [mm]: 465
• Thread Size: M12 x 1,5
• Cone Size [mm]: 18
• paired article number: 79512AL
• Name: ALT 79507AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Material: Sheet Steel
• Thread Size: M12x1,5
• Length [mm]: 347
• Replace in pairs only:
• reinforced version:
• Width [mm]: 277
• with environmental seal: Carbon neutral
• Required quantity: 1
• paired article number: 116 050 0009/HD
• Manufacturer: MEY

General Information: Improved performance and service life: larger ball pin life: larger ball pin diameter of MEYLE-HD ball joint distributes forces over a larger surface area and minimizes part wear. Name: Roolimine - K„„ndmik VW P. A3/GOLF4/BORA PR KPL.ZE SWORZNIEM

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Material: Sheet Steel
• Thread Size: M12x1,5
• Length [mm]: 347
• Replace in pairs only:
• reinforced version:
• Width [mm]: 277
• with environmental seal: Carbon neutral
• Required quantity: 1
• paired article number: 116 050 0010/HD
• Manufacturer: MEY

General Information: Improved performance and service life: larger ball pin life: larger ball pin diameter of MEYLE-HD ball joint distributes forces over a larger surface area and minimizes part wear. Name: Roolimine - K„„ndmik VW P. A3/GOLF4/BORA LE KPL.ZE SWORZNIEM

• Length [mm]: 517
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 1.089
• Manufacturer: VAICO

Fitting Position: Rear Axle, outer, Left, Right, Lower, Rear Axle both sides General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 04SKV750

• Vehicle Identification Number (VIN) from: 1M-1-035001
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material, with holder
• Control/Trailing Arm Type: Control Arm
• Steering: with tie rod ends
• Stabiliser Bar Diameter [mm]: 23
• Quantity per axle: 1
• Full Set:
• for components see parts list:
• Axle alignment required after fitting:
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with axle joint, with rubber mount, with coupling rod, with ball joint General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Warranty: 3 years warranty
• Name: CE 04SKV960
• Manufacturer: ESEN SKV

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle
• Axle alignment required after fitting:
• Weight [kg]: 1.329
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Weight [kg]: 9.22
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 04SKV270

• Fitting Position: Front Axle
• Name: Roolikomplekt,k„„ndmik
• Manufacturer: JPA