• Engine Code: AKK, AUD
• Construction Year from: 08.1999, 11.2000
• Construction Year to: 08.2002
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Vehicle Identification Number (VIN) from: 6K..1..148 501
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Heated, Regulating Probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 625
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AKV, APQ
• Vehicle Identification Number (VIN) from: 6K-V-165 001
• Vehicle Identification Number (VIN) to: 6K-X-127 000
• Exhaust System: for pre-catalytic converter
• for OE number: 021906265AK
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 785
• Number of pins: 4
• Weight [g]: 119
• Gross Weight [g]: 149
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3A5,
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3A5,
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-008
• Manufacturer: NTY
• Name: NTY ESL-AU-008

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) from: 6K-X-127001
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 710
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: AEX
• Vehicle Identification Number (VIN) to: 6K-V-165 000
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AKV
• Construction Year from: 11.1998
• Lambda Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 6K..X..127001
• Number of circuits: 4
• Overall Length [mm]: 720
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AEX, AKV, APQ
• Construction Year from: 05.1997, 09.1997, 12.1997, 11.1998
• Construction Year to: 08.1997, 10.1998
• Lambda Sensor: Regulating Probe, Finger probe
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..X..127000
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 6K..X..127001
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-505
• Additional information: MGS-505

• Lambda Sensor: Lambda Sensor
• Number of circuits: 4
• Length [mm]: 480
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AEX, AKV, APQ, ANX
• Construction Year from: 05.1997, 09.1997, 12.1997
• Construction Year to: 08.1997, 10.1998
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..X..127 000
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720.1
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.182
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AKK, AUD
• Construction Year from: 08.1999, 11.2000
• Construction Year to: 08.2002
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• Vehicle Identification Number (VIN) from: 6K..1..148501
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 09.1997, 12.1997
• Construction Year to: 10.1998
• Vehicle Identification Number (VIN) to: 6K-X-127 000
• Engine Code: AEX, AKV, APQ
• Block Separation:
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 740
• Manufacturer: DELPHI

• Engine Code: ANW, AKK, AUD
• Construction Year from: 05.1999, 08.1999, 06.2000, 11.2000
• Construction Year to: 08.2000, 08.2002, 10.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..1..148500
• Vehicle Identification Number (VIN) from: 6K..1..148501
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: AKV, APQ
• Vehicle Identification Number (VIN) from: 6K-V-165 001
• Vehicle Identification Number (VIN) to: 6K-X-127 000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0117
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"

• Engine Code: AKV
• Construction Year from: 11.1998
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 500
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: AKV, AEX, APQ
• Vehicle Identification Number (VIN) from: ******6K*X*127001
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 720
• Weight [kg]: 0.118
• for OE number: 06A 906 265 F
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 2.1
• Number of circuits: 4
• Length [mm]: 720
• Conductor Number: 4
• Cable Length [mm]: 720
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: AEX
• Vehicle Identification Number (VIN) from: 6K-X-127001
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• for OE number: 030 906 265 CB
• Length [mm]: 465
• Weight [kg]: 0.171
• Thread Size: M18 x 1,5
• Socket colour: black
• Cable Length [mm]: 470
• Number of pins: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 600
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, after catalytic converter
• Engine Code: ANW/AUD
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.1998
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) from: 6K..X..127 001
• Engine Code: AKV
• Cable Length [mm]: 730
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"

• Engine Code: AEX
• Vehicle Identification Number (VIN) to: ******6K*V*165000
• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.108
• Name: SW 33 10 3171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AEX
• Vehicle Identification Number (VIN) to: 6K-V-165 000
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Construction Year from: 05.1997
• Construction Year to: 10.1998
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: AUD
• Vehicle Identification Number (VIN) from: 6K-1-148 501
• Vehicle Identification Number (VIN) to: 6K-2-205 000
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 580
• Weight [kg]: 0.097
• for OE number: 06A 906 262 AH
• Name: SW 33 10 3202
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AEX
• Vehicle Identification Number (VIN) from: 6K-X-127001
• Cable Length [mm]: 720
• Conductor Number: 4
• Lambda Sensor: Heated, Planar probe, Thread pre-greased
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.997.163
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 6K-V-165 001
• Vehicle Identification Number (VIN) to: 6K-X-127 000
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 6K-X-127 001
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.139
• Number of circuits: 4
• Connector Shape: D Shape
• Socket colour: black
• Number of pins: 4
• for OE number: 030 906 265 BS
• Cable Length [mm]: 600
• Thread Size: M18 x 1,5
• Length [mm]: 720
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AEX
• Vehicle Identification Number (VIN) to: 6K-V-165000
• Lambda Sensor: Regulating Probe
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Engine Code: AEX, AKV, APQ, ANX
• Construction Year from: 05.1997, 09.1997, 12.1997, 11.1998
• Construction Year to: 08.1997, 10.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..X..127 000
• Vehicle Identification Number (VIN) from: 6K..X..127 001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986505

• Engine Code: ANW, AKK, AUD
• Construction Year from: 05.1999, 08.1999, 06.2000, 11.2000
• Construction Year to: 08.2000, 08.2002, 10.2000
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..1..148 500
• Vehicle Identification Number (VIN) from: 6K..1..148 501
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Engine Code: AEX
• Vehicle Identification Number (VIN) to: 6K-V-165000
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: AKV
• Construction Year from: 11.1998
• Vehicle Identification Number (VIN) from: 6K-X-127 001
• Lambda Sensor: Regulating Probe
• Length [mm]: 720
• Number of pins: 4
• Technical Information Number: Universal 77004
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Engine Code: AKV, APQ
• Vehicle Identification Number (VIN) from: 6K-X-127 001
• Exhaust System: for pre-catalytic converter
• for OE number: 06A906265E
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 705
• Number of pins: 4
• Weight [g]: 128
• Gross Weight [g]: 158
• Manufacturer: DENSO
• Name: DN DOX-1551
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 05.1999
• Construction Year to: 08.2002
• Vehicle Identification Number (VIN) from: 1-148 001, 2-205 001
• Vehicle Identification Number (VIN) to: 2-205 000
• Engine Code: AKK,AUD
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.122
• Socket colour: brown
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Length [mm]: 570
• for OE number: 06A 906 262 F
• Cable Length [mm]: 570
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Engine Code: ANW, AUD
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AEX
• Construction Year from: 05.1997
• Construction Year to: 08.1997
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 860
• for article number: 81546
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Fitting Position: after catalytic converter
• Engine Code: ANW, AUD
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AKV
• Construction Year from: 11.1998
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: black
• Number of circuits: 4
• Cable Length [mm]: 540
• Connector Shape: D Shape
• Weight [kg]: 0.166
• for OE number: 06A 906 265 AP
• Thread Size: M18 x 1,5
• Length [mm]: 680
• Number of pins: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: X-127 001
• Engine Code: AKV,APQ
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.16
• Name: VA 368436
• Manufacturer: VALEO

• Engine Code: AKV
• Construction Year from: 11.1998
• Fitting Position: Exhaust Manifold
• Connector Shape: D Shape
• for OE number: 03D 906 265 B
• Weight [kg]: 0.15
• Thread Size: M18 x 1,5
• Socket colour: black
• Number of circuits: 4
• Length [mm]: 650
• Number of pins: 4
• Number of connectors: 4
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ANW
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 1,525
• Number of circuits: 4
• Manufacturer: VDO

• Engine Code: AEX, AKV, APQ, ANX
• Construction Year from: 05.1997, 09.1997, 12.1997
• Construction Year to: 08.1997, 10.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 6K..X..127 000
• Number of circuits: 4
• Overall Length [mm]: 750
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: AKK, AUD
• Construction Year from: 08.1999, 11.2000
• Construction Year to: 08.2002
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Vehicle Identification Number (VIN) from: 6K..1..148 501
• Number of circuits: 8
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: AKV
• Construction Year from: 11.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 6K..X..127 001
• Number of circuits: 4
• Overall Length [mm]: 720
• Available as universal article as well, see article no.: 0258986505
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Identification Number (VIN) to: 1-148 000
• Engine Code: ANW,AUD
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 368003

Fitting Position: before catalytic converter, after catalytic converter

• Vehicle Identification Number (VIN) from: 1-148 001, 2-205 001
• Vehicle Identification Number (VIN) to: 2-205 000
• Engine Code: AKK,AUD
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 720
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.17
• Manufacturer: VALEO
• Name: VA 368041

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: ANW, AUD
• Construction Year from: 05.1999
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: ANW, AUD
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Length [mm]: 800
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: AUD
• Vehicle Identification Number (VIN) from: 6K-2-205 001
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 500
• Number of circuits: 4
• Manufacturer: VDO

• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor
• Fitting Position: after catalytic converter
• Engine Code: ANW, AUD
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 10.1998
• Construction Year to: 05.1999
• Transmission Type: Manual Transmission
• Engine Code: AKV, APQ
• Vehicle Identification Number (VIN) from: X 127 001
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 730
• Number of circuits: 4
• Manufacturer: VDO

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.16
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: ANW, AUD
• Construction Year from: 05.1999
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: ESEN SKV

• Fitting Position: Front
• Exhaust System: before catalytic converter
• Engine Code: ANW, AUD
• Lambda Sensor: Regulating Probe
• Length [mm]: 850
• Number of connectors: 5
• Manufacturer: VERNET

• Engine Code: AUD
• Vehicle Identification Number (VIN) from: 6K-2-205 001
• Lambda Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 500
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Engine Code: ANW, AUD
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166831

Brief Information: *** HELLA Electronics OE competence for over 60 years.