Assembly categories
Filter Braking System Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Driver Cab Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior EquipmentProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Sensor Type: Inductive Sensor
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Number of mounting bores: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU009169231
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Sensor Type: Passive sensor
- Number of pins: 2
- Voltage [V]: 12
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
- Number of connectors: 2
- Weight [kg]: 0.05
- Supplementary Article/Info 2: with seal ring
- Name: SW 33 10 6299
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Connector Shape: oval
- Number of mounting bores: 1
- Sensor Type: Inductive Sensor
- Resistor [Ohm]: 920
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 34.5
- Voltage [V]: 12
- for OE number: 9118368
-
Name: Andur,
vntvoll - Manufacturer: MD
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Number of pins: 2
- Manufacturer: FAE
- Length [mm]: 38
- Width [mm]: 67
- Height [mm]: 34
- Weight [kg]: 0.046
- Number of connectors: 2
-
Supplementary Article/Info 2: for crankshaft,
with seal ring, without cable - Required quantity: 1
- Resistor [Ohm]: 920
- Colour: black
- Operating Mode: Electric
-
Sensor Type: Passive sensor,
Inductive Sensor - Number of pins: 2
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 34.5
- Connector Shape: oval
- Number of mounting bores: 1
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of connectors: 2
- Weight [kg]: 0.001
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
VNTVOLL - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 51
- Number of connectors: 2
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
- Name: SW 40 92 4616
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 51
- Number of connectors: 2
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
-
Fuel Mixture Formation: Common Rail
(CR) - Number of pins: 3
- Supplementary Article/Info 2: High Pressure Side
- Weight [kg]: 0.07
- Warranty: 3 years warranty
- Name: CE 17SKV619
- Manufacturer: ESEN SKV
- Length [mm]: 50.7
-
Thread Size: M18x1,
5 mm -
Pressure to [bar]: 1,
800 - Number of pins: 3
- Weight [kg]: 0.07
- Warranty: 3 years warranty
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Name: CE 17SKV734
- Manufacturer: ESEN SKV
-
Name: ANDUR,
KOMPRESSORIROHK - Manufacturer: BOS
Manufacturer: MAGNETI MARELLI
-
Thread Size: M18 x 1,
5 - Number of pins: 3
- Weight [kg]: 0.064
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 50
-
External Thread Size: M18 x 1,
5 - Spanner Size: 27
- Number of connectors: 3
- Screw length below head [mm]: 16
- Weight [kg]: 0.057
-
Name: ANDUR,
KTUSEROHK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 2
- Socket colour: black
- Spanner Size: 27
- Thread Size: M16x1.5
- for OE number: 51274210154