Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Comfort Systems Transmission Exhaust System Kere Ignition Engine Windscreen Cleaning Lights Fuel Supply InteriorProduct
Description
In stock
Price
(incl. VAT)
- Colour: red
- Capacity [litre]: 1
- Weight [kg]: 0.93
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Name: FE 08971
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour of operating fluid: red
- Capacity [litre]: 1
- Weight [kg]: 0.949
- Observe service information:
- Name: FE 29934
- Manufacturer: FEBI BILSTEIN
- Additional information: F29934
- Lisainfo: F29934
Specification: AISIN WARNER AW-1, ATF AW-1, ATF SP-II, ATF SP-II M, ATF SP-III, ATF T-IV, BMW ATF 6, Chrysler ATF +4, Daihatsu Alumix ATF, Dexron III, Renault ELFMATIC J6, Fiat Typo T-IV, FIAT 9.55550-AV1, FIAT 9.55550-AV2, Ford WSS-M2C922-A1, Ford WSS-M2C924-A, Honda ATF Z-I, Honda DW-1, Isuzu Besco ATF-II, Isuzu Besco ATF-III, JASO M315 Typ 1A, Kia SP-II / SP-III, Kia SP-IV RR, Mazda ATF D-III, Mazda ATF M-III, Mazda ATF M-V, Mitsubishi SP II, Mitsubishi SP III, Nissan ATF-Matic D, Nissan ATF-Matic J, Nissan C/D/J, Nissan Matic S, Peugeot ATF AW-1, Saab ATF 3309, Subaru ATF / Special, Suzuki AW-1, Suzuki 3309, Suzuki 3317, Toyota ATF WS, Toyota Type D-2/WS, Toyota Type T-II, Toyota Type T-III, Toyota Type T-IV, Toyota WS, TUTELA GI/E, TUTELA GI/V, TUTELA VI General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour of operating fluid: red
- Capacity [litre]: 1
- Weight [kg]: 0.92
- Observe service information:
- Manufacturer: FEBI
Specification: MB 236.10, ZF 4HP 18, MAN 339 V1, MAN 339 Z2, MB 236.13, Honda Z1, MAN 339 V2, ZF 4HP 14, Mercon V, Dexron III H, Dexron III G, Ford WSS-M2C922-A1, Ford WSS-M2C202-B, Ford WSA-M2C195-A, VW TL 52533, Ford WSS-M2C919-E, MB 236.6, MB 235.71, MB 236.9, ZF TE-ML 14B General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 115
- Height [mm]: 225
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 1
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Length [mm]: 60
- Packing Type: Canister
-
Article number of the recommended special tool: V99-
1017 - Weight [kg]: 1.19
- Manufacturer: VAICO
Oil manufacturer recommendation: CAT TO-2, ZF TE-ML 03D, ZF TE-ML 14A, Allison C-4, ZF TE-ML 11A, ZF TE-ML 17C, MAN 339 Typ Z-1/V-1, GM Dexron II D, ZF TE-ML 04D, Mercedes Benz 236,1, Voith 55,6335,32, Ford Mercon General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: for automatic transmission
-
Article number of the recommended special tool: V99-
1017 - Colour: red
- Capacity [litre]: 1
- Chemical Properties: Synthetic
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 60,
000 - Height [mm]: 225
- Quantity Unit: Litre
- Width [mm]: 115
- Packing Type: Bottle
- Length [mm]: 60
- Weight [kg]: 1.16
- Manufacturer: VAICO
Oil manufacturer recommendation: ATF Spezial, AISIN WARNER 3314, DEXRON III, BMW 7045E, BMW LA2634, BMW LT 71141, CHRYSLER MS7176E, CHRYSLER 9602, CHRYSLER ATF +3, CHRYSLER ATF +4, ALUMIX ATF MULTI, FIAT 9.55550-AV1, FIAT 9.55550-AV4, FORD M2C195-A, FORD M2C202-B, FORD MERCON, FORD MERCON V, FORD M2C924-A, FORD M2C922-A1, GM 9986195, HONDA ATF Z-I, HYUNDAI SP III, ISUZU BESCO ATF -II, ISUZU BESCO ATF -III, JASO M315 TYPE 1A, JATCO 3100 PL085/FWD, JWS 3309/TYPE T-IV, MAZDA ATF D-III, MAZDA ATF M-3, ATF M-V, MB 235.71, MB 236.6, MB 236.9, MB 236.10, MB 236.11, MITSUBISHI SP-II, MITSUBISHI SP-III, NISSAN MATIC C/D/J/K, SAAB 3309, SUBARU ATF OIL, SUBARU ATF HP, SUZUKI ATF 3309, SUZUKI ATF 3317, TOYOTA TYPE D-2, TOYOTA TYPE T, TOYOTA TYPE T-II, TOYOTA TYPE T-III, TOYOTA TYPE T-IV, ZF TE-ML 11B General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
- Colour: red
- Capacity [litre]: 5
- Weight [kg]: 4.88
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: Suffix A, MAN 339 Z1, MB 236.6, MB 236.2, Ford WSS-M2C186-A, MB 236.7, MB 236.1, MB 236.5, Ford WSS-M2C166-H, MAN 339 V1, Allison C3/C4, Dexron II D, Ford WSS-M2C185-A, Ford WSS-M2C138-CJ General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Colour of operating fluid: red
- Capacity [litre]: 5
- Weight [kg]: 4.43
- Observe service information:
- Manufacturer: FEBI
- Name: FE 101161
- Additional information: FE101161
- Lisainfo: FE101161
Specification: AISIN WARNER AW-1, ATF AW-1, ATF SP-II, ATF SP-II M, ATF SP-III, ATF T-IV, BMW ATF 6, Chrysler ATF +4, Daihatsu Alumix ATF, Dexron III, Renault ELFMATIC J6, Fiat Typo T-IV, FIAT 9.55550-AV1, FIAT 9.55550-AV2, Ford WSS-M2C922-A1, Ford WSS-M2C924-A, Honda ATF Z-I, Honda DW-1, Isuzu Besco ATF-II, Isuzu Besco ATF-III, JASO M315 Typ 1A, Kia SP-II / SP-III, Kia SP-IV RR, Mazda ATF D-III, Mazda ATF M-III, Mazda ATF M-V, Mitsubishi SP II, Mitsubishi SP III, Nissan ATF-Matic D, Nissan ATF-Matic J, Nissan C/D/J, Nissan Matic S, Peugeot ATF AW-1, Saab ATF 3309, Subaru ATF / Special, Suzuki AW-1, Suzuki 3309, Suzuki 3317, Toyota ATF WS, Toyota Type D-2/WS, Toyota Type T-II, Toyota Type T-III, Toyota Type T-IV, Toyota WS, TUTELA GI/E, TUTELA GI/V, TUTELA VI General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Colour of operating fluid: red
- Capacity [litre]: 5
- Weight [kg]: 4.7
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Specification: MB 236.10, ZF 4HP 18, MAN 339 V1, MAN 339 Z2, MB 236.13, Honda Z1, MAN 339 V2, ZF 4HP 14, Mercon V, Dexron III H, Dexron III G, Ford WSS-M2C922-A1, Ford WSS-M2C202-B, Ford WSA-M2C195-A, VW TL 52533, Ford WSS-M2C919-E, MB 236.6, MB 235.71, MB 236.9, ZF TE-ML 14B General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Type: for automatic transmission
- Colour: red
- Chemical Properties: Contains mineral oil
- Capacity [litre]: 5
- Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Height [mm]: 230
-
Article number of the recommended special tool: V99-
1017 - Length [mm]: 300
- Width [mm]: 115
- Weight [kg]: 4.567
- Quantity Unit: Box
- Packing Type: Canister
- Manufacturer: VAICO
Oil manufacturer recommendation: Voith 55,6335,32, Allison C-4, ZF TE-ML 04D, ZF TE-ML 14A, MAN 339 Typ Z-1/V-1, CAT TO-2, ZF TE-ML 11A, GM Dexron II (D), Mercedes Benz 236,1, FORD MERCON, ZF TE-ML 17C, ZF TE-ML 03D, ATF II General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks