• Fitting Position: Front Axle, inner, Lower, in front of axle
• Inner Diameter [mm]: 16
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.29

• Fitting Position: Lower Front Axle
• Manufacturer: OYODO

• Length [mm]: 30
• Outer Diameter [mm]: 16.3
• Weight [kg]: 0.008
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle both sides
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear, Front Axle both sides
• Required quantity: 4
• Supplementary Article/Info 2: without holding frame
• paired article number: VKDS 335029
• Length [mm]: 30
• Height [mm]: 16
• Inner Diameter [mm]: 15.2
• Outer Diameter [mm]: 16.2
• Manufacturer: SKF ZAWIESZENIE

• Quantity per packing unit: 2
• Axle alignment required after fitting:
• Length [mm]: 60
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear, Lower Front Axle
• Mounting Type: Rubber-Metal Mount
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Front, Right, Left, Front Axle, Lower
• Block Separation:
• Vehicle Identification Number (VIN) from: R2587416, R5111735, RB011798
• Total Length [mm]: 60
• Outer Diameter [mm]: 39
• Inner Diameter [mm]: 12
• Weight [kg]: 0.13
• Name: COC 21652943
• Manufacturer: CORTECO

• Fitting Position: Lower Front Axle, Front
• Lisainfo: Rubber mount for wishbone
• Additional information: Rubber mount for wishbone

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 43
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD248W

• Fitting Position: Lower, Front, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 59
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39, 43
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 38
• for OE number: 352300
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: R2595225, R5111734, R6036587, R8145949
• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 39
• SVHC: No SVHC present!
• Name: LU 829006710
• Manufacturer: FAG

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• for OE number: 96 378 346
• Manufacturer: GSP AUTOMOTIVE

• Thickness [mm]: 59
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39, 43
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Front, Front Axle Right
• Weight [kg]: 0.131
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 335022
• Height [mm]: 60
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 42.2
• Name: SK VKDS335022
• Manufacturer: SKF

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Front Axle
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: P 2 603822, P 8 146889
• Fitting Position: Front Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: R2587416, R8145950, R5111735
• Fitting Position: Front Axle
• Inner Diameter [mm]: 16
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left, Front Axle Right, Rear, Lower
• Lisainfo: Rubber mount for wishbone
• Additional information: Rubber mount for wishbone

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: P2603823, P8146890
• Vehicle Identification Number (VIN) to: R2587415, R5111734, R8145949
• Block Separation:
• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Bore Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16
• Width [mm]: 58
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone
• Additional information: Rubber mount for wishbone

• Vehicle Identification Number (VIN) from: R2595226, R5111735, R6036588, R8145950, RB011859
• Fitting Position: Lower Front Axle, Rear
• Lisainfo: Rubber mount for wishbone
• Additional information: Rubber mount for wishbone

• Vehicle Identification Number (VIN) to: P 2 603822, P 8 146889
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Fitting Position: Front Axle
• Axle alignment required after fitting:
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Right, Left, Front Axle, Rear, Lower
• Total Length [mm]: 57.8
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16.2
• Weight [kg]: 0.28
• Manufacturer: CORTECO
• Name: COC 21652944

• Fitting Position: Lower Front Axle, Rear
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Vehicle Identification Number (VIN) to: P 2 603822, P 8 146889
• Fitting Position: Front Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60
• for OE number: 352348
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) from: R2587416, R5111735, R8145950
• Fitting Position: Right, Left, Front Axle, Rear, Lower
• Total Length [mm]: 57.8
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16.2
• Weight [kg]: 0.25
• Manufacturer: CORTECO
• Name: COC 21652805

• Vehicle Identification Number (VIN) from: P2603823, P8146890
• Vehicle Identification Number (VIN) to: R2587415, R5111734, R8145949, RB011797
• Fitting Position: Front, Right, Left, Front Axle
• Block Separation:
• Total Length [mm]: 60
• Outer Diameter [mm]: 43
• Inner Diameter [mm]: 12.2
• Weight [kg]: 0.13
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: *********P2603823, *********P8146890
• Block Separation:
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 67, 60
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.267
• Manufacturer: FEBI

Vehicle Identification Number (VIN) to: *********R2587415, *********R8145949, *********P4999999, *********R5111734 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 58
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16
• Material: Rubber/Metal
• Weight [kg]: 0.26
• Name: DY 37-08008-6
• Manufacturer: DYS

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Material: Rubber/Metal
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 68
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: R6036588, R5111735, R8145950, R2595226
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: *********P2603823, *********P8146890
• Block Separation:
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 67, 60
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.278
• Name: SW 40 60 0023
• Manufacturer: SWAG

Vehicle Identification Number (VIN) to: *********R2587415, *********R8145949, *********P4999999, *********R5111734 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: R2595225, R5111734, R8145949
• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 60.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle Identification Number (VIN) to: P2603822, P8146889
• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Bore Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16
• Width [mm]: 24
• Manufacturer: HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Lower
• Vehicle Identification Number (VIN) to: R2587415/R5111734, R8145949
• Inner Diameter 1 [mm]: 16
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 58
• Manufacturer: DELPHI
• Name: DE TD249W

• Vehicle Identification Number (VIN) from: R2587416, R5111735, R8145950
• Fitting Position: Front Axle Left, Front Axle Right, Front
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Bore Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16
• Width [mm]: 58
• Manufacturer: HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Rear, Lower
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60
• for OE number: 352356
• Manufacturer: SASIC

• Vehicle Identification Number (VIN) to: *********P2603822, *********P8146889
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 68
• Weight [kg]: 0.247
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: *********P2603823, *********P8146890
• Block Separation:
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 67, 60
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.267
• Supplementary Article/Info 2: with mounting sleeves
• Manufacturer: FEBI

Vehicle Identification Number (VIN) to: *********R2587415, *********R8145949, *********P4999999, *********R5111734 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********P2603822, *********P8146889
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 68
• Weight [kg]: 0.253
• Supplementary Article/Info 2: with mounting sleeves
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• for OE number: 03 52 348 S1
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle, inner, in front of axle, Lower
• Control/Trailing Arm Type: Control Arm
• Inner Diameter 1 [mm]: 16
• Outer Diameter 1 [mm]: 60
• Thickness 1 [mm]: 58
• Manufacturer: DELPHI
• Name: DE TD330W

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Name: Control arm bush - kit left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
OPEL ASTRA/VECTRA
(kvaliteediklass: PJ)"

• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60, 68
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.28
• Supplementary Article/Info 2: with mounting sleeves
• Manufacturer: FEBI

Vehicle Identification Number (VIN) from: *********R2587416, *********R5111735, *********R8145950 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********P2603822, *********P8146889
• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Outer Diameter 1 [mm]: 60
• Outer Diameter 2 [mm]: 68
• Weight [kg]: 0.278
• Name: SW 40 60 0004
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 58
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60, 68
• Material: Rubber/Metal
• Fitting Position: Lower, Front Axle Left, Rear, Front Axle Right
• Weight [kg]: 0.233
• Observe service information:
• Manufacturer: FEBI

Vehicle Identification Number (VIN) from: *********R2587416, *********R5111735, *********R8145950 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides, Lower, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 16
• Outer Diameter [mm]: 60
• Length [mm]: 58
• Weight [kg]: 0.276
• Manufacturer: RTS

• Vehicle Identification Number (VIN) from: P2603823, P8146890
• Vehicle Identification Number (VIN) to: R2587415, R5111734, R8145949
• Fitting Position: Right, Left, Front Axle, Rear, Lower
• Block Separation:
• Weight [kg]: 0.24
• Manufacturer: CORTECO ZAWIESZENIE

• Vehicle Identification Number (VIN) from: R2595226, R5111735, R6036588, R8145950
• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 60.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Lower Front Axle, Rear, both sides, inner
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 58
• Outer Diameter [mm]: 60
• Inner Diameter [mm]: 16.2
• Supplementary Article/Supplementary Info: with accessories
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) from: R2 587416, R5 111735, R8 145950
• Fitting Position: Front Axle, both sides, Rear
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: with accessories
• Quantity per axle: 2
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: P 2 603822, P 8 146889
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Supplementary Info: with accessories
• Fitting Position: Front Axle, Rear, both sides
• Quantity per axle: 2
• Manufacturer: LEMFORDER
• Name: LMI 2535001

SVHC: No information available, please contact the manufacturer!