• Fitting Position: Rear Axle
• Fabrication Number: ZTT-MZ-007A

• Fitting Position: Rear Axle Lower, inner, Lower
• Height [mm]: 35
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.3
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: outer, Rear Axle, inner, Left, Right, Lower
• Weight [g]: 102
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Name: IM 1435
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Height [mm]: 35
• Name: ALT 91242AL
• Manufacturer: ALTE AUTOMOTIVE

• Control/Trailing Arm Type: for control arm
• Required quantity: 4
• Fitting Position: both sides, Rear Axle
• Outer Diameter [mm]: 36.4
• Inner Diameter [mm]: 12
• Weight [kg]: 0.127
• Name: TG 00224288
• Manufacturer: TEDGUM
• Additional information: 00224288
• Lisainfo: 00224288

• Fitting Position: Rear Axle Lower, outer, Lower
• Width [mm]: 36
• Height [mm]: 36
• Height 1 [mm]: 45
• Outer Diameter 1 [mm]: 36
• Inner Diameter 1 [mm]: 12
• Manufacturer: GSP

• Weight [kg]: 0.121
• Packaging length [cm]: 9.7
• Packaging width [cm]: 2.7
• Packaging height [cm]: 2.7
• Length [mm]: 98
• Thread Size: M14x2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Height [mm]: 35
• Name: ALT 91241AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Lower, outer, Lower
• Height [mm]: 55
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 32.7
• Manufacturer: GSP

• Fitting Position: Rear Axle Upper
• Weight [kg]: 0.142
• Packaging length [cm]: 3.7
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.6
• Manufacturer: FEBEST

• Fitting Position: Rear Axle Left, Rear Axle Right, inner, Lower
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 32.5
• Length [mm]: 55
• paired article number: 271429
• Weight [kg]: 0.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: inner, Rear Axle Lower, in front of axle
• Weight [kg]: 0.115
• Packaging length [cm]: 3.5
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Thickness [mm]: 35
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.134
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Rear Axle, inner, Left, Upper, Right
• Material: Metal
• Control/Trailing Arm Type: for control arm
• Weight [g]: 124
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Length [mm]: 28
• Overall Length [mm]: 35
• Name: IM 1205
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Lower, inner, Lower, Rear Axle
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32.3
• Length [mm]: 35
• Manufacturer: ASHIKA

• Production date from: 201601
• Weight [kg]: 0.101
• Packaging length [cm]: 7.9
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Length [mm]: 79
• Thread Size: M10x1,5
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Height [mm]: 65
• Name: ALT 88833AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle both sides, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37
• Height [mm]: 45
• Name: ALT 91244AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Height [mm]: 65
• Outer Diameter [mm]: 54
• Inner Diameter [mm]: 14
• Material: Rubber/Metal
• Weight [kg]: 0.27
• Name: DY 37-09700-6
• Manufacturer: DYS

• Fitting Position: Rear Axle both sides, Lower, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 36.5
• Inner Diameter [mm]: 12.2
• Length [mm]: 45
• Weight [kg]: 0.164
• Manufacturer: RTS

• Fitting Position: Rear Axle, Lower, inner
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 33
• Height [mm]: 55
• Name: ALT 91245AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, both sides, inner, Upper, outer
• Required quantity: 4
• Weight [kg]: 0.295
• Control/Trailing Arm Type: for control arm
• Supplementary Article/Info 2: with screw
• Manufacturer: TEDGUM

• for OE number: C273-34-300B, C273-34-350B
• Fitting Position: inner, Lower Front Axle, Front
• Weight [kg]: 0.285
• Packaging length [cm]: 6.5
• Packaging width [cm]: 5.4
• Packaging height [cm]: 5.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Left, Right
• Weight [g]: 476
• Outer Diameter [mm]: 60
• Overall Length [mm]: 142
• Name: IM 1445
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle, Centre
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Manufacturer: CORTECO ZAWIESZENIE

• Fitting Position: Lower, Lower Front Axle
• for OE number: 1 234 371
• Manufacturer: GSP AUTOMOTIVE

• Fabrication Number: ZTT-FR-018A

Fitting Position: Rear Axle, Left, Right, Lower, in front of axle, outer

• Fitting Position: Rear Axle Left, Rear Axle Right, outer, Lower
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 36.1
• Length [mm]: 45
• paired article number: 271430
• Weight [kg]: 0.16
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle, Lower, in front of axle
• Manufacturer: DELPHI
• Name: DE TD1782W

• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.488
• Packaging length [cm]: 6.8
• Packaging width [cm]: 6.8
• Packaging height [cm]: 6.4
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Left, Right
• Material: Rubber/Metal
• Length [mm]: 142
• Outer Diameter [mm]: 60
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 60.2
• SVHC: No SVHC present!
• Manufacturer: FAG

• Material: PU (Polyurethane)
• Fitting Position: outer, Lower, inner, Rear Axle, both sides, Front
• Inner Diameter [mm]: 12
• Control/Trailing Arm Type: for control arm
• Required quantity: 4
• Supplementary Article/Info 2: with grease cap
• Shore-A hardness value, base body: 80
• Outer Diameter [mm]: 32.3
• Weight [kg]: 0.12
• Colour: red
• Manufacturer: TEDGUM

• Inner Diameter [mm]: 12
• Material: PU (Polyurethane)
• Fitting Position: both sides, outer, Upper, Rear Axle, inner
• Outer Diameter [mm]: 36.3
• Weight [kg]: 0.125
• Colour: red
• Required quantity: 4
• Supplementary Article/Info 2: with grease cap
• Shore-A hardness value, base body: 80
• Manufacturer: TEDGUM

• Length [mm]: 142
• Outer Diameter [mm]: 60
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.451
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Left
• Fabrication Number: ZTP-FR-010B

• Fitting Position: Rear Axle, outer, Front, in front of axle
• Control/Trailing Arm Type: Semi-Trailing Arm
• Required quantity: 2
• Weight [kg]: 0.587
• Packaging length [cm]: 13.5
• Packaging width [cm]: 9.5
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Fitting Position: Left, Right, Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Hydro Mount, Rubber-Metal Mount
• Weight [g]: 1,379
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 87
• Length [mm]: 93
• Name: IM 1443
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Lower, Front Axle Right
• Manufacturer: GSP AUTOMOTIVE

• Fitting Position: Lower Front Axle, Left
• Weight [kg]: 1.337
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• Fitting Position: Lower, Front Axle Left
• Manufacturer: GSP

• Fitting Position: Front Axle Right, Lower, Rear
• Inner Diameter [mm]: 19
• Height [mm]: 88
• paired article number: 92287AL
• Name: ALT 92288AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle Left, Lower, Rear
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 21
• Height [mm]: 88
• paired article number: 92288AL
• Name: ALT 92287AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: behind the axle, Front Axle Left, inner, Lower
• Inner Diameter [mm]: 18.6
• Outer Diameter [mm]: 74
• Length [mm]: 87
• Mounting Type: Hydro Mount
• paired article number: 271373
• Weight [kg]: 1.47
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Lower Front Axle, Right
• Weight [kg]: 1.346
• Mounting Type: Hydro Mount
• Packaging length [cm]: 16
• Packaging width [cm]: 13.6
• Packaging height [cm]: 8.5
• Manufacturer: FEBEST

• Fitting Position: Rear, Lower, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 334017
• Name: SK VKDS334017
• Manufacturer: SKF

• Fitting Position: Front Axle, both sides, Lower, Rear
• Control/Trailing Arm Type: Control Arm
• Required quantity: 2
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1.2
• Packaging length [cm]: 20.5
• Packaging width [cm]: 12
• Packaging height [cm]: 12
• Manufacturer: MONROE