Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Height [mm]: 74
- Weight [kg]: 0.33
-
Thread Size: UNF 3/
4''- 16 - Outer Diameter [mm]: 80
-
Filter type: Spin-
on Filter
Lisainfo: Bedford Rascal 86->90, Daihatsu Charade 77->92, Suzuki Alto 82->08, Baleno 96->02, Swift 85->01, Vauxhall Rascal 86->93 Additional information: Bedford Rascal 86->90, Daihatsu Charade 77->92, Suzuki Alto 82->08, Baleno 96->02, Swift 85->01, Vauxhall Rascal 86->93
- Vehicle Equipment: for vehicles with power steering
- Diameter [mm]: 12
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic Filter,
steering system -
Additional information: Hydraulic Filter,
steering system
- Vehicle Equipment: for vehicles with power steering
- Diameter [mm]: 10
- Manufacturer: JP GROUP
-
Lisainfo: Hydraulic Filter,
steering system -
Additional information: Hydraulic Filter,
steering system
- Electrode Gap [mm]: 0.7
-
Spark Plug: 1 -
Earthed Electrode - Weight [kg]: 0.06
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 0.8
-
Thread Size: M14 x 1,
25 -
Spanner Size: 20,
8 -
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704001
- Manufacturer: HELLA
- Required quantity: 3
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Construction Year from: 09.1986
-
Filter type: Spin-
on Filter -
Supplementary Article/Info 2: with one anti-
return valve - Height [mm]: 67
- Outer Diameter [mm]: 70
- Manufacturer: KAMOKA FILTRY
-
Filter type: Spin-
on Filter - Length [mm]: 72.5
- Outer Diameter [mm]: 68
- Fitted Diameter [mm]: 64
-
Internal Thread [mm]: 3/
4 - 16 UNF - Manufacturer: ASHIKA
-
Fitting Position: Front,
Rear - Length [mm]: 350
- Manufacturer: ASHIKA
- Engine Code: CB
- Required quantity: 3
- for OE number: 1WT118110
- Connector type: Crimped SAE
- Diameter [mm]: 14
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Nickel mass electrode - Thread Length [mm]: 19
- Manufacturer: DENSO
- Name: DN W16TT
- Lisainfo: W16TT DENSO
- Additional information: W16TT DENSO
- Height [mm]: 66
-
Thread Size: 3/
4"- 16 UNF - Outer Diameter [mm]: 68
- Packing Type: Box
-
Filter type: Spin-
on Filter -
Version: w/
Anti- Drain valve, with By- Pass valve - Bypass Valve Opening Pressure [bar]: 1
- Packaging length [cm]: 7
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Sealing Ring Diameter from [mm]: 55
- Sealing Ring Diameter up to [mm]: 63
- Name: CH COF100180S
- Manufacturer: CHAMPION
- Required quantity: 3
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RN9YC
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1.5
-
Name: CH OE006/
T10 - Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
-
Filter type: Spin-
on Filter - Height [mm]: 65
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 66
-
Supplementary Article/Info 2: with one anti-
return valve - Outer Diameter 2 [mm]: 62
- Inner Diameter 2 [mm]: 54
- Name: OLIFILTER
- Manufacturer: MAX
- Inner Diameter 1 [mm]: 54
- Inner Diameter 2 [mm]: 62
-
Thread Size: 3/
4- 16UNF - Outer Diameter [mm]: 67
-
Filter type: Spin-
on Filter - Height [mm]: 65
- Manufacturer: DELLO AUTOMEGA
- Outer Diameter 1 [mm]: 66
- Inner Diameter 1 [mm]: 63
- Inner Diameter 2 [mm]: 55
-
Thread Size: 3/
4"- 16 UNF - Height [mm]: 67
-
Filter type: Spin-
on Filter - Manufacturer: DENCKERMANN FILTRY
- for OE number: 90048 32049 000
- Length [mm]: 785
- Width [mm]: 10
-
Belts: Open-
sided, Toothed - Name: KIILRIHM
- Manufacturer: BOS
- Fitting Position: Front
- Length [mm]: 325
-
Supplementary Article/Info 2: with vehicle-
specific adaptor - Matching Adapter: V12
- Manufacturer: MAGNETI MARELLI
- Height [mm]: 66
-
Thread Size: "3/
4""- 16" - Diameter 3 [mm]: 55
- Diameter 4 [mm]: 63
- Outer Diameter [mm]: 69
-
Filter type: Spin-
on Filter - Manufacturer: DRIVE
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 4
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 4
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- for OE number: 90048 32051 000
- Length [mm]: 763
- Width [mm]: 10
-
Belts: Open-
sided, Toothed - Name: KIILRIHM
- Manufacturer: BOS
-
Filter type: Spin-
on Filter - Length [mm]: 72.5
- Outer Diameter [mm]: 68
- Fitted Diameter [mm]: 64
-
Internal Thread [mm]: 3/
4 - 16 UNF - Name: OLIFILTER
- Manufacturer: JPA
-
Lisainfo: FO-
W01S -
Additional information: FO-
W01S
- Construction Year to: 07.1987
- Height [mm]: 75
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 81.5
- Outer Diameter 1 [mm]: 84
- Outer Diameter 2 [mm]: 65
- Inner Diameter 1 [mm]: 55
- Bypass Valve Opening Pressure [bar]: 1.2
-
Supplementary Article/Info 2: with one anti-
return valve -
Filter type: Spin-
on Filter - Manufacturer: SOFIMA
- Construction Year from: 08.1987
- Height [mm]: 66.5
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 68
- Outer Diameter 1 [mm]: 71.5
- Outer Diameter 2 [mm]: 65
- Inner Diameter 1 [mm]: 56
- Bypass Valve Opening Pressure [bar]: 1
-
Supplementary Article/Info 2: with one anti-
return valve -
Filter type: Spin-
on Filter - Manufacturer: SOFIMA
-
Filter type: Spin-
on Filter, Main Stream Filtration - Diameter 1 [mm]: 69
-
Thread Size: 3/
4" - 16 UNF - Height [mm]: 67
- Name: CL DO 846
- Manufacturer: CLEAN FILTERS
- Fitting Position: Rear
- Length [mm]: 330
- Length [inch]: 13
- Weight [g]: 69
- Name: TR EF330
- Manufacturer: TRICO
-
Filter type: Spin-
on Filter -
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 81
- Height [mm]: 74
- Sealing Ring Diameter from [mm]: 56
- Sealing Ring Diameter up to [mm]: 65
- Manufacturer: MEAT&DORIA
-
Fitting Position: Front,
Rear - Length [mm]: 350
- Technical Information Number: Flat
- Manufacturer: ASHIKA
-
Filter type: Spin-
on Filter - Height [mm]: 80
-
Thread Size: 3/
4"- 16 - Outer Diameter [mm]: 84
- Quality class: PJ
- Name: Oil filter
- Fitting Position: Driver side
- Fastening Type: Hook fixing
- Length [mm]: 400
- Length [inch]: 16
- Weight [g]: 83
- Name: TR EF400
- Manufacturer: TRICO
-
Filter type: Spin-
on Filter - Height [mm]: 75.5
- Outer Diameter [mm]: 78.5
-
Thread Size: 3/
4 - 16UNF - Name: OLIFILTER
- Manufacturer: ALC
- Required quantity: 3
- Alternatively:
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
-
Quality/ Grade: Ti Poly-
V - Packing Type: Box
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Technical Information Number: CET8
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CET8
- Manufacturer: CHAMPION
-
Filter type: Spin-
on Filter - Height [mm]: 66
-
Thread Size: UNF 3/
4" - 16 - Outer Diameter [mm]: 70
- Inner Diameter 1 [mm]: 63
- Inner Diameter 2 [mm]: 53
- Bypass Valve Opening Pressure [bar]: 1
- Manufacturer: VALEO
- Name: VA 586054
-
Filter type: Spin-
on Filter - Height [mm]: 72
-
Thread Size: 3/
4" 16 UNF- 2B - Outer Diameter [mm]: 82
- Inner Diameter 2 [mm]: 57
- Outer Diameter 2 [mm]: 66
- Name: OLIFILTER
- Manufacturer: BOS
- Length [mm]: 170
- Width [mm]: 137
- Height [mm]: 59.4
- Filter type: Filter Insert
- Manufacturer: ASHIKA
- Required quantity: 3
- Alternatively:
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Quality/ Grade: Poly-
V Tit -
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Name: STEKNAL
- Manufacturer: BERU
- Construction Year from: 07.1986
- Construction Year to: 08.1989
- Driven Units: Alternator
- Tensile Cord Material: Polyester
-
Belt Material: Polychloroprene
(Neoprene) - Colour: Black
- Width [mm]: 10
- Length [mm]: 763
- Outer Length [mm]: 773
- Manufacturer: GATES
- Length [mm]: 170
- Width [mm]: 137
- Height [mm]: 59.4
- Filter type: Filter Insert
- Manufacturer: JAPKO
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 0.8
- Thread Size: M14 x 1.25
-
Spanner Size: 20,
8 -
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188705121
- Manufacturer: HELLA
- Construction Year from: 09.1986
-
Filter type: Spin-
on Filter - Outer Diameter [mm]: 68
- Seal Diameter [mm]: 63
-
Thread Size: 3/
4- 16 UNF - Height [mm]: 76
- Manufacturer: HENGST FILTER
-
Filter type: Spin-
on Filter - Height [mm]: 66
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 69
- Inner Diameter 1 [mm]: 63
- Inner Diameter 2 [mm]: 55
- SVHC: No SVHC present!
- Manufacturer: FILTRON
-
Filter type: Spin-
on Filter - Diameter [mm]: 65.5
- Height [mm]: 66.5
-
Thread Size: 3/
4"- 16UNF- 2B - Diameter 2 [mm]: 62.8
- Seal Diameter [mm]: 56.8
- Tightening Torque [Nm]: 16
- Article number of the recommended special tool: OCS 4
-
Supplementary Article/Info 2: with one anti-
return valve - Valve type: Overflow Valve
- Net Weight [g]: 196
- Packaging length [cm]: 7
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Manufacturer: KNECHT
- Name: KN OC215
- Fitting Position: Passenger Side
-
Matching Adapter: U-
hook - for OE number: 8521297402
- Length [mm]: 350
- Length [inch]: 14
- Weight [g]: 80
- Wiper blade type: Bracket wiper blade
- Manufacturer: DENSO
-
Name: DN DM-
035
-
Filter type: Spin-
on Filter -
Article number of the recommended special tool: LS 6/
1 - Gasket inner diameter: 54
- Seal Ring Outer Diameter: 62
- Height [mm]: 65
-
Thread Size: 3/
4- 16 UNF - Outer Diameter [mm]: 66
-
Supplementary Article/Info 2: with one anti-
return valve - Bypass Valve Opening Pressure [bar]: 1
- SVHC: No SVHC present!
- Name: OLIFILTER
- Manufacturer: MAN
- Fitting Position: Passenger Side
-
Matching Adapter: U-
hook -
Left-/right-hand drive vehicles: for right-
hand drive vehicles - Country Specific Design: Great Britain
- for OE number: 983602W910
- Length [mm]: 350
- Length [inch]: 14
- Weight [g]: 122
- Wiper blade type: Hybrid Wiper Blade
- Manufacturer: DENSO
- Fitting Position: Passenger Side
-
Matching Adapter: U-
hook -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - not for country specific design: Great Britain
- for OE number: 983602W100
- Length [mm]: 350
- Length [inch]: 14
- Weight [g]: 122
- Wiper blade type: Hybrid Wiper Blade
-
Name: DN DU-
035L - Manufacturer: DENSO
-
Additional information: DU-
035L DEN -
Lisainfo: DU-
035L DEN
- Engine Code: CB
- Required quantity: 3
-
Fuel Type: CNG/
LPG - Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Country Specific Design: Japan
-
Spark Plug: 1 -
Earthed Electrode, Platinum mass electrode - Thread Length [mm]: 19
- Manufacturer: DENSO
- Name: DN IW16TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Lisainfo: LPG2
- Additional information: LPG2
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
-
Engine Code: CB-
41 -
ACEA specification: A3/
B4, A3/ B3 -
API specification: SL,
CF - Recommended change interval [years]: 1
- Capacity [litre]: 5
- Observe the vehicle manufacturer specifications:
- Packing Type: Canister
- Observe system fill quantity:
-
SAE viscosity class: 10W-
40 - Width [mm]: 115
- Height [mm]: 230
- Length [mm]: 300
- Weight [kg]: 4.6
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fill quantity [l]: 3
-
Specification: API SF/
CD -
SAE viscosity class: 10W-
30 -
Oil - manufacturer recommendation: MIL-
L- 46152C
- Fill quantity [l]: 3
- Oil: Mineral Oil
- SAE viscosity class: 30
- Oil - manufacturer recommendation: MB 228.1
Specification: Deutz DQC I-02, MAN 270, MAN 271, MB 228.0, MB 228.1
- Fill quantity [l]: 3
- Oil: Mineral Oil
- SAE viscosity class: 30
Specification: API CF-4, API SF/CF, CCMC G2/D1, Deutz DQC I-02, MAN 271, MB 228.1, MIL-L-2104B, MIL-L-46152B
- Fill quantity [l]: 3
- Oil: Mineral Oil
-
Oil - manufacturer recommendation: MIL-
L- 2104D
Specification: API CF, API CF-4, API SF/CD, Deutz DQC I-02, Ford WSS-M2C153-D, GM 6048-M, GM 6049-M, MAN 271, MB 228.1, MIL-L-2104D, MIL-L-46152C