• Fitting Position: at the intermediate lever
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year to: 05.1997
• Vehicle Identification Number (VIN) to: 70-W-008645
• Fitting Position: at gearshift linkage
• Lisainfo: Relay lever for shift mechanism
• Additional information: Relay lever for shift mechanism

• Fitting Position: at the intermediate lever
• Manufacturer: 3RG

• Quantity per packing unit: 10
• Shape: O-Ring
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter [mm]: 11.8
• Thickness [mm]: 2.5
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 5
• Fitting Position: at the intermediate lever, at gearshift linkage
• Colour: Ivory White
• Vehicle Equipment: for vehicles with manual transmission
• Name: Puks,k„igu-/llitusvarras
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Transmission Type: Manual Transmission
• Fitting Position: Lower

• Fitting Position: at gearshift linkage
• Quantity per packing unit: 10
• Material: Plastic
• Colour: Orange
• Vehicle Equipment: for vehicles with manual transmission
• Name: PUKS,KŽIGU-/LšLITUSVARRAS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 10
• Fitting Position: at gearshift linkage
• Material: Plastic
• Colour: black
• Vehicle Equipment: for vehicles with manual transmission
• Manufacturer: TOPRAN
• Lisainfo: 111 329 HP
• Additional information: 111 329 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: Bush for selector
• Manufacturer: VIKA

• Vehicle Equipment: for vehicles with manual transmission
• Material: Plastic
• Outer Diameter [mm]: 19
• for OE number: 7D0711131
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: at gearshift linkage
• Vehicle Equipment: for vehicles with manual transmission
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Equipment: for vehicles with manual transmission
• Material: Plastic
• Outer Diameter [mm]: 24
• for OE number: 015311544
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Quantity per packing unit: 10
• Material: Plastic
• Outer Diameter [mm]: 19.1
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity per packing unit: 10
• Fitting Position: at gearshift linkage, at mounting
• Colour: Milk White
• Vehicle Equipment: for vehicles with manual transmission
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AEU, ACU
• Material: Plastic
• Outer Diameter [mm]: 19.1
• Name: REMONDIKOMPLEKT,KŽIGUKANG
• Manufacturer: MAX

• Fitting Position: at gearshift linkage, Front
• Quantity per packing unit: 20
• Transmission Type: Manual Transmission
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Diameter [mm]: 19
• Transmission Type: Manual Transmission
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Transmission Type: Manual Transmission
• Quantity per packing unit: 10
• Material: Plastic
• Outer Diameter [mm]: 24.3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: at gearshift linkage
• Material: Plastic
• Manufacturer: 3RG

• Vehicle Equipment: for vehicles with manual transmission
• for OE number: 701 711 066A
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lisainfo: Bearing bush for selecting rod mounting
• Additional information: Bearing bush for selecting rod mounting

• Vehicle Identification Number (VIN) to: 70-W-008645
• Quantity per packing unit: 10
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 19.8
• Shape: slotted
• Material: Sheet Steel
• Transmission Type: for manual transmission
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: at gearshift linkage
• Material: Plastic
• Colour: Ivory White
• Vehicle Equipment: for vehicles with manual transmission
• Name: Puks,k„igu-/llitusvarras
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 22.5
• Outer Diameter [mm]: 26.5
• Manufacturer: 3RG

• Outer Diameter [mm]: 24
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Height [mm]: 15
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 19
• Manufacturer: 3RG

• Fitting Position: at gearshift linkage
• Manufacturer: 3RG

• Height [mm]: 19.5
• Inner Diameter [mm]: 7
• Outer Diameter [mm]: 24
• Manufacturer: 3RG

• Transmission Type: Manual Transmission
• Manufacturer: 3RG

• Fitting Position: at mounting, at gearshift linkage
• Vehicle Equipment: for vehicles with manual transmission
• Height [mm]: 22
• Name: PUKS,LšLITUSVARRAS
• Manufacturer: MAX

• Quantity per packing unit: 10
• Fitting Position: at gearshift linkage
• Colour: transparent
• Vehicle Equipment: for vehicles with manual transmission
• Name: PUKS,KŽIGU-/LšLITUSVARRAS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with manual transmission
• Material: Plastic
• for OE number: 701711066
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• Material: Plastic
• Manufacturer: 3RG

• Lisainfo: Bushing for gearshift rod
• Additional information: Bushing for gearshift rod

• Transmission Type: Manual Transmission
• Material: Plastic
• Outer Diameter [mm]: 24.3
• Name: REMONDIKOMPLEKT,KŽIGUKANG
• Manufacturer: MAX
• Lisainfo: 109089756
• Additional information: 109089756

• Fitting Position: at gearshift linkage
• Material: Plastic
• Colour: Milk White
• Vehicle Equipment: for vehicles with manual transmission
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 70-Y-023420
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 70-W-008646
• Quantity per packing unit: 10
• Fitting Position: Rear
• Material: Plastic
• Shape: slotted
• Colour: transparent
• Transmission Type: for manual transmission
• Name: Puks,k„igu-/llitusvarras
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Fitting Position: Upper

• Quantity per packing unit: 20
• Fitting Position: Front
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 20
• Fitting Position: Rear
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 20
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Manual Transmission
• Quantity per packing unit: 20
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Fitting Position: Centre

• Quantity per packing unit: 20
• Transmission Type: Manual Transmission
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 15
• Outer Diameter [mm]: 24
• Height [mm]: 6.5
• Radial Shaft Seal Design: ASW OF
• Material: HNBR (hydrogenated nitrile butadiene rubber)
• Dust Cover: with dust lip
• Manufacturer: ELRING
• Lisainfo: 886.780 ELRING
• Additional information: 886.780 ELRING

• Colour: black
• Transmission Type: 5-Speed Manual Transmission
• Lisainfo: Gear knob, 1-5 + R
• Additional information: Gear knob, 1-5 + R

• Fitting Position: at gearshift linkage
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Weight [g]: 45
• Fitting Position: Front Axle, Lower
• Inner Diameter [mm]: 16
• Manufacturer: 3RG

• Transmission Type: 5-Speed Manual Transmission
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity per packing unit: 20
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of Gears: 5 Speed
• Manufacturer: 3RG

• Number of Gears: 8 Speed
• Supplementary Article/Info 2: without bellow
• Manufacturer: DPA

General Information: Gearshift handle; 5 speed; without dust cover; black knob

• Colour: black
• Inner Diameter [mm]: 14
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.12
• Number of Gears: 5 Speed
• Measurement Accuracy +/- [mm]: 2
• Manufacturer: SKV GERMANY
• Name: CE 63SKV129

• Vehicle Identification Number (VIN) to: 70-W-008645
• for OE number: 701711202
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with manual transmission
• for OE number: 701 711 259B
• Name: Puks,k„igu-/llitusvarras
• Manufacturer: HAN
• Lisainfo: 116 606 HP
• Additional information: 116 606 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Fitting Position: Upper, Rear

• Construction Year from: 06.1997
• Vehicle Identification Number (VIN) from: 70-W-008646
• Fitting Position: at gearshift linkage
• Lisainfo: Relay lever for shift mechanism
• Additional information: Relay lever for shift mechanism

• Transmission Type: 5-Speed Manual Transmission
• Colour: black
• Material: Plastic
• Inner Diameter [mm]: 12
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.13
• Manufacturer: SKV GERMANY

• Weight [g]: 45
• Fitting Position: Front Axle, Lower
• Inner Diameter [mm]: 16
• Manufacturer: 3RG

• Transmission Type: Manual Transmission
• Parameter: Repair Kit
• Name: Tross,k„igukast
• Manufacturer: TRI

• Transmission Type: Manual Transmission
• Parameter: Repair Kit
• Name: Tross,k„igukast
• Manufacturer: TRI